Sliding Shower Installation Kit

Kit Includes:

• 2 x Door Upper Rollers
• 2 x Door Stabiliser Guides
• 2 x Fixed Panel Rail Connectors
• 2 x Stoppers
• 1 x Recessed Round Handle
• 1 x Floor Guide
• 2 x Rail Wall Brackets

Economy Spring Hinge Panels

Glass Gate Spring Hinge Panel. Used to swing a glass gate off.

• 11 Widths available (600mm, 800mm, 1000mm, 1100mm, 1200mm, 1300mm, 1400mm, 1500mm, 1600mm, 1700mm, 1800mm)
• Height: 1200mm
• Thickness: 12mm
• Holes: 4 x 14mm Holes to fix glass gate hinges

Install with Economy Glass Gate Panel and either glass to glass spring hinges or Polaris 155 series hinges.

Glass is certified to Australian Standards

38mm 5800mm Long Slotted Round Tube for Glass Balustrade / Pool Fence Top Rail

• 38mm 5800mm Long Slotted Tube
• Use for Glass Balustrade or Glass Pool Fence Top Rail
• Fits directly onto the top of the glass
• 316 grade Stainless Steel
• 14x14mm Slot
• Install with glazing rubber or silicon directly to the glass
• Available in Mirror or satin finish

Centre Post - 2 Inch Round Glass Clamp for Stainless Top Rail

2" Round Glass Clamp Centre Post for Stainless Top Rail •Position: Centre •Use: Glass Balustrade •Material: 2" Mirror Finish Tube •Height: 970mm •Grade: 316 Marine Grade Stainless •Base: 4 Hole Square Flange •Top: Perpendicular Joiner •Glass: Install with 850mm Glass Panels •Handrail: Install with 2 Inch Round Stainless Top Rail The perpendicular joiner is Tek screwed to the underside of the rail then glued and riveted into the top of the post.

Centre Post - 50x50 Square Glass Clamp for Stainless Rail

•Position: Centre •Use: Glass Balustrade •Material: 50x50 Satin Finish Stainless Steel •Height: 970mm •Grade: 316 Marine Grade Stainless •Base: 4 Hole Square Flange •Top: Square Perpendicular Joiner •Glass: Install with 850mm Glass Panels •Handrail: 50x50 Stainless Steel Top Rail

890 x 1200 x 8mm Glass Pool Fence Gate Panel

Glass Gate Panel.

• Width: 890mm
• Height: 1200mm
• Thickness: 8mm
• Weight: 21kg
• Hinge Holes: 4 x 10mm Holes to fix hinges
• Latch Holes: 2 x 10mm Holes to fix latch

Used for:

• Glass Pool Fencing

It can be installed with a Top Mounted Rail

Glass is certified to Australian Standards

329(w)x2050(h)x10mm Glass Shower Screen Hinge Panel

• Width: 329mm
• Height: 2050mm
• Thickness: 10mm
• Weight: 17kg
• Allow a 3mm Gap between the wall and glass and a 5mm Gap between this panel and the door.

When installed using Wall Brackets:

• When installed with a 600mm door in a corner configuration using a return panel the overall width will be 950mm
• When installed with a 600mm door between two wall the overall width will be 940mm

When installed using U Channel:

• When installed with a 600mm door in a corner configuration using a return panel the overall width will be 958mm
• When installed with a 600mm door between two wall the overall width will be 948mm

Offset Wall to Glass Matt Black Shower Screen Door Hinge

2 required per door

• Offset Wall to Glass Hinge
• Matt Black Finish
• 3 x Fixing Holes
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards
• Made from solid brass
• Fixing Screws included
• Allen Key & Gaskets included

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

Square Offset Fixed Bracket - Suits round and Flat Rails

• 50mm Square Cap
• Suits round and Flat Rails
• Includes 3 Saddles 38mm, 50mm and Flat. You can simply change the saddle to use with different profile handrails.
• Requires a 20mm Diameter Hole in the Glass

Black Glass to Glass in Straight Line Economy Pool Fence Gate Latch

• Black Glass to Glass Latch - Straight Line
• Use for Glass Pool Fence Gate or Glass Balustrade Gate
• Backing Plates are powder coated 316 Stainless Steel
• Economy Latch is Black Polymer
• Requires Gate to be drilled (2 x 10mm Holes, 20mm in from edge and 42mm apart)
• Latch Panel must be 12mm - No holes required
• Suits 8, 10 and 12mm gates
• For best results leave a 9mm gap between the gate and latch panel

610(w)x2041(h)x10mm Glass Shower Screen Knob Open Door Panel

For use with a Single Door Knob.

• Width: 610mm
• Height: 2041mm
• Thickness: 10mm
• Weight: 33kg
• Can be swung off the wall or a hinge panel

Requires 1 x Door Knob and 2 x Hinges.

397(w)x2050(h)x10mm Glass Shower Screen Return/Fixed Panel

This panel can be used as a return panel when installing a corner shower or a fixed panel when installing a single panel screen.

• Width: 397mm
• Height: 2050mm
• Thickness: 10mm
• Weight: 20kg
• Allow a 3mm Gap between the wall and glass and a 3mm Gap between this panel and the door.

Installation Widths:

• 400mm when installing with a wall bracket
• 407-410mm when installing with 19mm U Channel
• 407-422mm when installing with 35mm U Channel

600x1280 x 15mm Glass With 4 x Bottom Holes for Standoffs

• Width: 600mm
• Height: 1280mm
• Thickness: 15mm
• 4 x 22mm holes for Standoffs

Suitable for installation with:

• Glass Standoffs
• Top Mount Rail

Sliding Shower Screen Rail

Glass to Glass Spring Hinge

• Glass to Glass Gate Hinge
• Use for Glass Pool Fence Gate or Glass Balustrade Gate
• Suits 8 & 10mm Glass Gates
• Suits 12mm Hinge Panel
• 316 Grade Stainless
• Gate needs to be drilled with 4 x 10mm Holes (24mm in from the side and 47 apart)
• Hinge panel needs to be drilled 4 x 14mm Holes (40mm in from the side and 60mm apart)
• For best results allow for a 10mm gap between the hinge panel and gate

Square Core Hole Stainless Spigot for Glass Balustrade or Glass Pool Fence

Square Core Hole Spigot

• Friction Fit - No holes in Glass Required
• Use for Glass Balustrade or Glass Pool Fence
• 2205 Grade Stainless Steel
• Suits 12mm Thick Glass
• 45mm Front profile
• Extension available for extra height or anchoring
• Use for Glass Balustrading or Pool Fencing applications
• Load test certificates available if required.
• Available in Mirror or Satin Finish

Click Here to view our Core Hole Installation Guide

38mm In-Line Joiner for Glass Balustrade / Pool Fence Top Rail

• Joins 2 straight lengths of 38mm Slotted Tube
• Use for Glass Balustrade or Glass Pool Fence Top Rail
• 316 grade Stainless Steel
• Fit by Welding or epoxy glue
• Available in Mirror or satin finish

Round Core Hole Stainless Spigot for Glass Balustrade or Glass Pool Fence

Round Core Hole Spigot

• Friction Fit - No holes in glass required
• 2205 Grade Stainless Steel
• 50mm Diameter
• Extension available for extra height or anchoring
• Suitable for Glass Balustrade or Pool Fence applications
• Load test certificates available if required.
• Available in Mirror or Satin Finish

Click Here to view our Core Hole Installation Guide

700x1280 x 15mm Glass With 4 x Bottom Holes for Standoffs

• Width: 700mm
• Height: 1280mm
• Thickness: 15mm
• 4 x 22mm holes for Standoffs

Suitable for installation with:

• Glass Standoffs
• Top Mount Rail

Corner Post - 2 Inch Round Glass Clamp Post for Stainless Rail

2" Round Glass Clamp Corner Post for Stainless Top Rail •Position: Corner •Use: Glass Balustrade •Material: 2" Mirror Finish Tube •Height: 970mm •Grade: 316 Marine Grade Stainless •Base: 3 Hole Round Flange •Top: 90 Degree Tee Flush Joiner •Glass: Install with 850mm Glass Panels •Handrail: Install with 2 Inch Round Stainless Top Rail

379(w)x2050(h)x10mm Glass Shower Screen Hinge Panel

• Width: 379mm
• Height: 2050mm
• Thickness: 10mm
• Weight: 19kg
• Allow a 3mm Gap between the wall and glass and a 5mm Gap between this panel and the door.

When installed using Wall Brackets:

• When installed with a 600mm door in a corner configuration using a return panel the overall width will be 1000mm
• When installed with a 600mm door between two wall the overall width will be 990mm

When installed using U Channel:

• When installed with a 600mm door in a corner configuration using a return panel the overall width will be 1008mm
• When installed with a 600mm door between two wall the overall width will be 998mm

Glass to Glass Chrome Shower Screen Door Hinge

2 required per door

• Glass to Glass Hinge
• Chrome Plated Finish
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards (90 Degrees inwards and Outwards)
• Will hold door at 90 degrees inwards, 90 Degree Outwards and 180 Degrees closed.
• Made from solid brass
• Allen Key & Gaskets included

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

Wall to Glass Matt Black Shower Screen Door Hinge

2 required per door

• Wall to Glass Hinge
• Matt Black Finish
• 4 x Fixing Holes
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards
• Made from solid brass
• Fixing Screws included
• Allen Key & Gaskets included

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

38mm Diameter Round Offset Bracket - Adjustable Height - Fixed Saddle

• 38mm Diameter Round Cap
• Suits round or flat rails
• Adjustable Height
• Fixed Saddle
• Includes 3 Saddles 38mm, 50mm and Flat. You can simply change the saddle to use with different profile handrails.
• Requires a 20mm Hole in the Glass

Glass to Wall/Square Post Economy Pool Fence Gate Latch

• Glass to Wall/Square Post
• Use for Glass Pool Fence Gate or Glass Balustrade Gate
• Backing Plates are 316 Stainless Steel
• Latch is Black Polymer
• Requires Gate to be drilled (2 x 12mm Holes, 20mm in from edge and 42mm apart)
• Suits 8, 10 and 12mm gates
• For best results leave a 9mm gap between the gate and Post/Wall

620(w)x2041(h)x10mm Glass Shower Screen Knob Open Door Panel

For use with a Single Door Knob.

• Width: 620mm
• Height: 2041mm
• Thickness: 10mm
• Weight: 35kg
• Can be swung off the wall or a hinge panel

Requires 1 x Door Knob and 2 x Hinges.

497(w)x2050(h)x10mm Glass Shower Screen Return/Fixed Panel

This panel can be used as a return panel when installing a corner shower or a fixed panel when installing a single panel screen.

• Width: 497mm
• Height: 2050mm
• Thickness: 10mm
• Weight: 25kg
• Allow a 3mm Gap between the wall and glass and a 3mm Gap between this panel and the door.

Installation Widths:

• 500mm when installing with a wall bracket
• 507-510mm when installing with 19mm U Channel
• 507-522mm when installing with 35mm U Channel

1000 x 1200 x 8mm Glass Pool Fence Gate Panel

Glass Gate Panel.

• Width: 1000mm
• Height: 1200mm
• Thickness: 8mm
• Weight: 23kg
• Hinge Holes: 4 x 10mm Holes to fix hinges
• Latch Holes: 2 x 10mm Holes to fix latch

Used for:

• Glass Pool Fencing

It can be installed with a Top Mounted Rail

Glass is certified to Australian Standards

Sliding Shower Door Bump Stopper

• 2130mm Long
• Suits 10mm Glass
• 10mm Bulb
• Prevents Sliding Glass Door contact between glass and wall.

Glass to Wall/Post Spring Hinge

• Glass to Wall/Square Post
• Use for Glass Pool Fence or Glass Balustrade Gate
• Suits 8 & 10mm Glass Gates
• 316 Grade Stainless
• Gate needs to be drilled with 4 x 10mm Holes (24mm in from the side and 47 apart)
• You will need to allow for a gap of 22mm between the gate and post

38mm 90 Degree Joiner for Glass Balustrade / Pool Fence Top Rail

• Joins 38mm Slotted Tube at a 90 degree angle (on a corner)
• Use for Glass Balustrade or Glass Pool Fence Top Rail
• 316 grade Stainless Steel
• Fit by Welding or epoxy glue
• Available in Mirror or satin finish

Flat Dress Ring for Round Core Hole Spigot

Neatly fits over core hole spigot to hide grout

750x1280 x 15mm Glass With 4 x Bottom Holes for Standoffs

• Width: 750mm
• Height: 1280mm
• Thickness: 15mm
• 4 x 22mm holes for Standoffs

Suitable for installation with:

• Glass Standoffs
• Top Mount Rail

Glass to Glass 90 Degree External Angle Pool Fence Gate Latch

• Glass to Glass at a 90 Degree External Angle Latch
• Use for Glass Pool Fence Gate or Glass Balustrade Gate
• Backing Plates are 316 Stainless Steel
• Latch is Black Polymer
• Requires Gate to be drilled (2 x 10mm Holes, 20mm in from edge and 42mm apart)
• Latch Panel must be 12mm - No holes required
• Suits 8, 10 and 12mm gates
• For best results leave a 9mm gap between the gate and latch panel

429(w)x2050(h)x10mm Glass Shower Screen Hinge Panel

• Width: 429mm
• Height: 2050mm
• Thickness: 10mm
• Weight: 22kg
• Allow a 3mm Gap between the wall and glass and a 5mm Gap between this panel and the door.

When installed using Wall Brackets:

• When installed with a 600mm door in a corner configuration using a return panel the overall width will be 1050mm
• When installed with a 600mm door between two wall the overall width will be 1040mm

When installed using U Channel:

• When installed with a 600mm door in a corner configuration using a return panel the overall width will be 1058mm
• When installed with a 600mm door between two wall the overall width will be 1048mm

Wall Bracket - Matt Black - For Glass Shower Screen

Used to fix Hinge and Return/Fixed panels to the wall.

3 Per Panel recommended

• Wall Bracket
• 3mm Gap between glass and wall
• Matt Black Finish
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• 2 x Compression/Friction screws
• No holes in glass required
• Made from solid brass
• 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

50mm Diameter Round Offset Bracket - Adjustable Height - Fixed Saddle

• 50mm Diameter Round Cap
• Suits Round and Flat Rails
• Adjustable Height
• Fixed Saddle
• Includes 3 Saddles 38mm, 50mm and Flat. You can simply change the saddle to use with different profile handrails.
• Requires a 20mm Diameter Hole in the Glass

630(w)x2041(h)x10mm Glass Shower Screen Knob Open Door Panel

For use with a Single Door Knob.

• Width: 630mm
• Height: 2041mm
• Thickness: 10mm
• Weight: 37kg
• Can be swung off the wall or a hinge panel

Requires 1 x Door Knob and 2 x Hinges.

597(w)x2050(h)x10mm Glass Shower Screen Return/Fixed Panel

This panel can be used as a return panel when installing a corner shower or a fixed panel when installing a single panel screen.

• Width: 597mm
• Height: 2050mm
• Thickness: 10mm
• Weight: 30kg
• Allow a 3mm Gap between the wall and glass and a 3mm Gap between this panel and the door.

Installation Widths:

• 600mm when installing with a wall bracket
• 607-610mm when installing with 19mm U Channel
• 607-622mm when installing with 35mm U Channel

600 x 1200 x 12mm Glass Pool Fence Hinge Panel

Glass Gate Hinge Panel. Used to swing a glass gate off.

• Width: 600mm
• Height: 1200mm
• Thickness: 12mm
• Weight: 22kg
• Holes: 4 x 14mm Holes to fix glass gate hinges

Suitable for installation with:

• Friction Spigots
• Deck Mount Channel

Used for:

• Glass Pool Fencing

It can be installed with a Top Mounted Rail

Glass is certified to Australian Standards

Note: This panel will need to be secured to a post or another glass panel using Glass Braces or Glass Clamps. It will not hole a gate if only supported by Spigots.

Sliding Shower Door Water Seal

• 2130mm Long
• Suits 10mm Glass
• 26mm Soft Flexible PVC Fin
• Reduces water escape between door and fixed panel

Glass to Glass Pool Fence Latch

• Glass to Glass Latch - Straight Line
• Use for Glass Pool Fence Gate or Glass Balustrade Gate
• Backing Plates are 316 Stainless Steel
• Requires Gate to be drilled (2 x 10mm Holes, 20mm in from edge and 42mm apart)
• Latch Panel must be 12mm - No holes required
• Suits 8, 10 and 12mm gates
• For best results leave a 9mm gap between the gate and latch panel

Square Cover for Square Core Hole Spigot

Neatly fits over our Square Core Hole Spigot to cover grout

38mm 90 Degree Radius Joiner for Glass Balustrade / Pool Fence Top Rail

• Joins 38mm Slotted Tube at a 90 degree angle (on a corner)
• Use for Glass Balustrade or Glass Pool Fence Top Rail
• 316 grade Stainless Steel
• Fit by Welding or epoxy glue
• Available in Mirror or satin finish

10mm x 100mm Counter Sunk Screws x 4 pack

• 316 Grade Stainless
• Hex Head Drive
• Self Tapping
• 100mm long
• 18mm Outer Diameter Head
• Ideal for use with Square and Round Base Plate Spigots into timber
• 1 pack required per spigot

Glass to Glass 90 Degree Internal Angle Pool Fence Gate Latch

• Glass to Glass at a 90 Degree Internal Angle Latch
• Use for Glass Pool Fence Gate or Glass Balustrade Gate
• Backing Plates are 316 Stainless Steel
• Latch is Black Polymer
• Requires Gate to be drilled (2 x 10mm Holes, 20mm in from edge and 42mm apart)
• Latch Panel must be 12mm - No holes required
• Suits 8, 10 and 12mm gates
• For best results leave a 9mm gap between the gate and latch panel

479(w)x2050(h)x10mm Glass Shower Screen Hinge Panel

• Width: 479mm
• Height: 2050mm
• Thickness: 10mm
• Weight: 24kg
• Allow a 3mm Gap between the wall and glass and a 5mm Gap between this panel and the door.

When installed using Wall Brackets:

• When installed with a 600mm door in a corner configuration using a return panel the overall width will be 1100mm
• When installed with a 600mm door between two wall the overall width will be 1090mm

When installed using U Channel:

• When installed with a 600mm door in a corner configuration using a return panel the overall width will be 1108mm
• When installed with a 600mm door between two wall the overall width will be 1098mm

135 Degree Glass to Glass Chrome Shower Screen Door Hinge

2 required per door

• 135 Degree Glass to Glass Hinge
• Chrome Plate Finish
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards
• Made from solid brass

Custom Mitre cut glass required for Hinge Panel

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

Offset Wall Bracket - Matt Black - For Glass Shower Screen

Used to fix Hinge and Return/Fixed panels to the wall.

3 Per Panel recommended

These are easier to install then the hidden screw wall bracket. The screw can be marked and installed with the glass standing in place.

• Wall Bracket
• Matt Black Finish
• 3mm Gap between glass and wall
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• 2 x Compression/Friction screws
• No holes in glass required
• Made from solid brass
• 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used.

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

38mm Diameter Round Offset Bracket - Adjustable Height - Adjustable Saddle

• 38mm Diameter Round Cap
• Suits round and flat rails
• Adjustable Height
• Adjustable Saddle
• Includes 3 Saddles 38mm, 50mm and Flat. You can simply change the saddle to use with different profile handrails.
• Requires a 20mm Diameter Hole in the Glass

640(w)x2041(h)x10mm Glass Shower Screen Knob Open Door Panel

For use with a Single Door Knob.

• Width: 640mm
• Height: 2041mm
• Thickness: 10mm
• Weight: 39kg
• Can be swung off the wall or a hinge panel

Requires 1 x Door Knob and 2 x Hinges.

697(w)x2050(h)x10mm Glass Shower Screen Return/Fixed Panel

This panel can be used as a return panel when installing a corner shower or a fixed panel when installing a single panel screen.

• Width: 697mm
• Height: 2050mm
• Thickness: 10mm
• Weight: 36kg
• Allow a 3mm Gap between the wall and glass and a 3mm Gap between this panel and the door.

Installation Widths:

• 700mm when installing with a wall bracket
• 707-710mm when installing with 19mm U Channel
• 707-722mm when installing with 35mm U Channel

800 x 1200 x 12mm Glass Pool Fence Hinge Panel

Glass Gate Hinge Panel. Used to swing a glass gate off.

• Width: 800mm
• Height: 1200mm
• Thickness: 12mm
• Weight: 29kg
• Holes: 4 x 14mm Holes to fix glass gate hinges

Suitable for installation with:

• Friction Spigots
• Deck Mount Channel

Used for:

• Glass Pool Fencing

It can be installed with a Top Mounted Rail

Glass is certified to Australian Standards

Note: This panel will need to be secured to a post or another glass panel using Glass Braces or Glass Clamps. It will not hole a gate if only supported by Spigots.

Slimline Rail Wall Bracket

Only required if using a 650mm modular Fixed Glass Panel

Glass to Wall Pool Fence Latch

• Glass to Wall/Square Post
• Use for Glass Pool Fence Gate or Glass Balustrade Gate
• Backing Plates are powder coated 316 Stainless Steel
• Requires Gate to be drilled (2 x 12mm Holes, 20mm in from edge and 42mm apart)
• Suits 8, 10 and 12mm gates
• For best results leave a 9mm gap between the gate and Post/Wall

38mm End Cap for Glass Balustrade / Pool Fence Top Rail

• 38mm End Cap
• Use for Glass Balustrade or Glass Pool Fence Top Rail
• 316 grade Stainless Steel
• Fit by Welding or epoxy glue
• Available in Mirror or satin finish

Glass to Wall/Square Post Deluxe Pool Fence Gate Latch

• Glass to Wall/Square Post
• Use for Glass Pool Fence Gate or Glass Balustrade Gate
• Backing Plates are 316 Stainless Steel
• Deluxe Latch in 316 Stainless Steel
• Requires Gate to be drilled (2 x 12mm Holes, 20mm in from edge and 42mm apart)
• Suits 8, 10 and 12mm gates
• For best results leave a 9mm gap between the gate and Post/Wall

1000 x 1200 x 12mm Glass Pool Fence Hinge Panel

Glass Gate Hinge Panel. Used to swing a glass gate off.

• Width: 1000mm
• Height: 1200mm
• Thickness: 12mm
• Weight: 36kg
• Holes: 4 x 14mm Holes to fix glass gate hinges

Suitable for installation with:

• Friction Spigots
• Deck Mount Channel

Used for:

• Glass Pool Fencing

It can be installed with a Top Mounted Rail

Glass is certified to Australian Standards

797(w)x2050(h)x10mm Glass Shower Screen Return/Fixed Panel

This panel can be used as a return panel when installing a corner shower or a fixed panel when installing a single panel screen.

• Width: 797mm
• Height: 2050mm
• Thickness: 10mm
• Weight: 43kg
• Allow a 3mm Gap between the wall and glass and a 3mm Gap between this panel and the door.

Installation Widths:

• 800mm when installing with a wall bracket
• 807-810mm when installing with 19mm U Channel
• 807-822mm when installing with 35mm U Channel

529(w)x2050(h)x10mm Glass Shower Screen Hinge Panel

• Width: 529mm
• Height: 2050mm
• Thickness: 10mm
• Weight: 27kg
• Allow a 3mm Gap between the wall and glass and a 5mm Gap between this panel and the door.

When installed using Wall Brackets:

• When installed with a 600mm door in a corner configuration using a return panel the overall width will be 1150mm
• When installed with a 600mm door between two wall the overall width will be 1140mm

When installed using U Channel:

• When installed with a 600mm door in a corner configuration using a return panel the overall width will be 1158mm
• When installed with a 600mm door between two wall the overall width will be 1148mm

Small Glass Brace Bracket - Matt Black - For Glass Shower Screen

Used to stiffen and brace a return or hinge panel by fixing a brace panel along the top and tying them together.

Can also be used to tie a Fixed panel back to the wall.

• Small Glass Brace Bracket
• Matt Black Finish
• Square Finish Edges
• Brace 8mm thick glass hood to 10mm thick return & hinge panels
• 2 x compression/friction screws
• Slimline Design
• No holes required in glass
• Made from solid brass

Tip: Place bracket ensuring glass door does not hit when swinging inwards.

50mm Diameter Round Offset Bracket - Adjustable Height - Adjustable Saddle

• 50mm Diameter Round Cap
• Suits round and flat rails
• Adjustable Height
• Adjustable Saddle
• Includes 3 Saddles 38mm, 50mm and Flat. You can simply change the saddle to use with different profile handrails.
• Requires a 20mm Diameter Hole in the Glass

Bostik V60 Transparent Glazing Silicone

Bostik V60 Transparent Glazing Silicon
Premium Grade Neutral Cure Glazing Silicon Sealant

Suitable for:

• Glazing top rails to glass balustrade panels
• Glazing Shower Screen glass to tiles

3 Way Glass to Glass Chrome Shower Screen Door Hinge

2 required per door

• 3 Way Glass to Glass Hinge allows for 2 x Doors from 1 x Hinge Panel
• Chrome Plated Finish
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards (90 Degrees inwards and Outwards)
• Will hold door at 90 degrees inwards, 90 Degree Outwards and 180 Degrees closed.
• Made from solid brass
• Allen Key & Gaskets included

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

90° Bracket for Sliding Shower Screen

Required when installing a sliding shower door with a glass return panel.

Glass to Glass 90 Degree External Latch

• Glass to Glass at a 90 Degree External Angle Latch
• Use for Glass Pool Fence Gate or Glass Balustrade Gate
• Backing Plates are 316 Stainless Steel
• Requires Gate to be drilled (2 x 10mm Holes, 20mm in from edge and 42mm apart)
• Latch Panel must be 12mm - No holes required
• Suits 8, 10 and 12mm gates
• For best results leave a 9mm gap between the gate and latch panel

Black Glass to Wall/Square Post Economy Pool Fence Gate Latch

• Black Glass to Wall/Square Post
• Use for Glass Pool Fence Gate or Glass Balustrade Gate
• Backing Plates are powder coated 316 Stainless Steel
• Latch is Black Polymer
• Requires Gate to be drilled (2 x 12mm Holes, 20mm in from edge and 42mm apart)
• Suits 8, 10 and 12mm gates
• For best results leave a 9mm gap between the gate and Post/Wall

1100 x 1200 x 12mm Glass Pool Fence Hinge Panel

Glass Gate Hinge Panel. Used to swing a glass gate off.

• Width: 1100mm
• Height: 1200mm
• Thickness: 12mm
• Weight: 40kg
• Holes: 4 x 14mm Holes to fix glass gate hinges

Suitable for installation with:

• Friction Spigots
• Deck Mount Channel

Used for:

• Glass Pool Fencing

It can be installed with a Top Mounted Rail

Glass is certified to Australian Standards

847(w)x2050(h)x10mm Glass Shower Screen Return/Fixed Panel

This panel can be used as a return panel when installing a corner shower or a fixed panel when installing a single panel screen.

• Width: 847mm
• Height: 2050mm
• Thickness: 10mm
• Weight: 43kg
• Allow a 3mm Gap between the wall and glass and a 3mm Gap between this panel and the door.

Installation Widths:

• 850mm when installing with a wall bracket
• 857-860mm when installing with 19mm U Channel
• 857-872mm when installing with 35mm U Channel

579(w)x2050(h)x10mm Glass Shower Screen Hinge Panel

• Width: 579mm
• Height: 2050mm
• Thickness: 10mm
• Weight: 30kg
• Allow a 3mm Gap between the wall and glass and a 5mm Gap between this panel and the door.

When installed using Wall Brackets:

• When installed with a 600mm door in a corner configuration using a return panel the overall width will be 1200mm
• When installed with a 600mm door between two wall the overall width will be 1190mm

When installed using U Channel:

• When installed with a 600mm door in a corner configuration using a return panel the overall width will be 1208mm
• When installed with a 600mm door between two wall the overall width will be 1198mm

Wall to Glass Chrome Shower Screen Door Hinge

2 required per door

• Wall to Glass Hinge
• Chrome Plated Finish
• 4 x Fixing Holes
• Allow 9mm gap between Wall and Glass
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards
• Made from solid brass
• Fixing Screws included
• Allen Key & Gaskets included

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

Offset Wall Bracket - Chrome Plated - For Shower Screen

Used to fix Hinge and Return/Fixed panels to the wall in a shower screen.

3 Per Panel recommended

These are easier to install then the hidden screw wall bracket. The screw can be marked and installed with the glass standing in place.

• Offset Wall Bracket for Shower Screens
• Chrome Finish
• 3mm Gap between glass and wall
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• 2 x Compression/Friction screws
• No holes in glass required
• Made from solid brass
• 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used.

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

Large Glass Brace Bracket - Matt Black - For Glass Shower Screen

Used to stiffen and brace a return or hinge panel by fixing a brace panel along the top and tying them together.

Can also be used to tie a Fixed panel back to the wall.

• Small Glass Brace Bracket
• Matt Black Finish
• Square Finish Edges
• Brace 8mm thick glass hood to 10mm thick return & hinge panels
• 4 x compression/friction screws
• Sturdy design
• No holes required in glass
• Made from solid brass

Tip: Place bracket ensuring glass door does not hit when swinging inwards.

Bostik 6S Silicon

• 300g Tube
• Translucent Finish
• High Performance
• Natural Cure
• Build in Mould Inhabitor

Extender for Core Hole Spigots

• Use with Square and Round Core Hole Spigots
• Extends spigot by up to 200mm
• Made from 304 grade Stainless Steel

Glass to Round Post Deluxe Gate Pool Fence Latch

• Glass to Round Post Deluxe Latch
• Use for Glass Pool Fence Gate or Glass Balustrade Gate
• Backing Plates are 316 Stainless Steel
• Latch is 316 Stainless Steel
• Requires Gate to be drilled (2 x 12mm Holes, 20mm in from edge and 42mm apart)
• Suits 8, 10 and 12mm gates
• For best results leave a 9mm gap between the gate and Post/Wall

1200 x 1200 x 12mm Glass Pool Fence Hinge Panel

Glass Gate Hinge Panel. Used to swing a glass gate off.

• Width: 1200mm
• Height: 1200mm
• Thickness: 12mm
• Weight: 43kg
• Holes: 4 x 14mm Holes to fix glass gate hinges

Suitable for installation with:

• Friction Spigots
• Deck Mount Channel

Used for:

• Glass Pool Fencing

It can be installed with a Top Mounted Rail

Glass is certified to Australian Standards

Glass to Wall Adjustable Brace Bracket - Matt Black - For Glass Shower Screen

Used to stiffen and brace a Return/Fixed panel by tying it to the wall.

• Wall to Glass support arm
• Matt Black Finish
• Double adjustability for easy installation. Adjustable at wall & at glass
• Hidden fixing wall installation for a neat finish.
• Suitable for 8 and 10mm thick glass
• Compression/friction screws secure to the glass. No holes in glass required
• Made from Brass

20 x 1.5mm Thick Glass Setting Blocks

• 1.5mm THICK x 10mm WIDE x 50mm LONG CLEAR SETTING BLOCKS
• Pack of 20
• Install under any Hinge or Fixed panel to prevent it from sitting directly onto the tiles
• These are clear so will remain under the glass once the silicon has been applied

Ultraloc threadlocker 3242 Compound

10ml Bottle

Medium strength removable grade threadlocking compound

872(w)x2050(h)x10mm Glass Shower Screen Return/Fixed Panel

This panel can be used as a return panel when installing a corner shower or a fixed panel when installing a single panel screen.

• Width: 872mm
• Height: 2050mm
• Thickness: 10mm
• Weight: 45kg
• Allow a 3mm Gap between this panel and the door.

Installation Widths:

• 875mm when installing with a wall bracket
• 882-885mm when installing with 19mm U Channel
• 882-897mm when installing with 35mm U Channel

Glass to Glass Pool Fence Gate Hinge Set

• Glass to Glass Gate Hinge
• Use for Glass Pool Fence Gate or Glass Balustrade Gate
• Suits 8 & 10mm Glass Gates
• Suits 12mm Hinge Panel
• 316 Grade Stainless
• Gate needs to be drilled with 4 x 10mm Holes (24mm in from the side and 47 apart)
• Hinge panel needs to be drilled 4 x 14mm Holes (40mm in from the side and 60mm apart)
• For best results allow for a 10mm gap between the hinge panel and gate

1300 x 1200 x 12mm Glass Pool Fence Hinge Panel

Glass Gate Hinge Panel. Used to swing a glass gate off.

• Width: 1300mm
• Height: 1200mm
• Thickness: 12mm
• Weight: 47kg
• Holes: 4 x 14mm Holes to fix glass gate hinges

Suitable for installation with:

• Friction Spigots
• Deck Mount Channel

Used for:

• Glass Pool Fencing

It can be installed with a Top Mounted Rail

Glass is certified to Australian Standards

897(w)x2050(h)x10mm Glass Shower Screen Return/Fixed Panel

This panel can be used as a return panel when installing a corner shower or a fixed panel when installing a single panel screen.

• Width: 897mm
• Height: 2050mm
• Thickness: 10mm
• Weight: 46kg
• Allow a 3mm Gap between the wall and glass and a 3mm Gap between this panel and the door.

Installation Widths:

• 900mm when installing with a wall bracket
• 907-910mm when installing with 19mm U Channel
• 907-922mm when installing with 35mm U Channel

Offset Wall to Glass Chrome Shower Screen Door Hinge

2 required per door

• Offset Wall to Glass Hinge
• 3 x Fixing Holes
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards
• Made from solid brass
• Fixing Screws included
• Allen Key & Gaskets included

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

Square Matt Black Shower Screen Door Handle

• Square D Handle Shower Screen Door Handle
• Stainless Steel in Matt Black Finish
• Back to back pull handles
• Suits 8mm, 10mm and 12mm thick glass
• Requires 2 x 12mm holes at 155mm centres
• Nylon spacers and gaskets included to prevent glass/metal contact

Bostik Grout - HES 20kg Bag - Used for Core Hole installation

Bostik Grout - HES 20kg Bag

Used to install Core Hole Spigots

Click to View Data Sheet

20 x 3mm Thick Glass Setting Blocks

• 3mm THICK x 10mm WIDE x 50mm LONG CLEAR SETTING BLOCKS
• Pack of 20
• Install under any Hinge or Fixed panel to prevent it from sitting directly onto the tiles
• These are clear so will remain under the glass once the silicon has been applied

Glass to Wall/Square Post Pool Fence Hinge Set

• Glass to Wall/Square Post
• Use for Glass Pool Fence or Glass Balustrade Gate
• Suits 8 & 10mm Glass Gates
• 316 Grade Stainless
• Gate needs to be drilled with 4 x 10mm Holes (24mm in from the side and 47 apart)
• You will need to allow for a gap of 22mm between the gate and post

1400 x 1200 x 12mm Glass Pool Fence Hinge Panel

Glass Gate Hinge Panel. Used to swing a glass gate off.

• Width: 1400mm
• Height: 1200mm
• Thickness: 12mm
• Weight: 50kg
• Holes: 4 x 14mm Holes to fix glass gate hinges

Suitable for installation with:

• Friction Spigots
• Deck Mount Channel

Used for:

• Glass Pool Fencing

It can be installed with a Top Mounted Rail

Glass is certified to Australian Standards

Square Recessed Matt Black Shower Screen Door Knob

• Square Recessed Shape Knob for Shower Screen Door
• Matt Black Finish
• Double pull knob
• Suits 8mm, 10mm and 12mm thick glass
• Requires a 12mm hole in the glass
• Made from Solid Brass
• Nylon spacers and gaskets included to prevent glass/metal contact

922(w)x2050(h)x10mm Glass Shower Screen Return/Fixed Panel

This panel can be used as a return panel when installing a corner shower or a fixed panel when installing a single panel screen.

• Width: 922mm
• Height: 2050mm
• Thickness: 10mm
• Weight: 47kg
• Allow a 3mm Gap between this panel and the door.

Installation Widths:

• 925mm when installing with a wall bracket
• 932-935mm when installing with 19mm U Channel
• 932-947mm when installing with 35mm U Channel

Glass to Round Post Pool Fence Hinge Set

• Glass to Round Post Hinge Set
• Use for Glass Pool Fence or Glass Balustrade Gate
• Suits 8 & 10mm Glass Gates
• 316 Grade Stainless
• Gate needs to be drilled with 4 x 10mm Holes (24mm in from the side and 47 apart)
• You will need to allow for a gap of 20mm between the gate and post

1500 x 1200 x 12mm Glass Pool Fence Hinge Panel

Glass Gate Hinge Panel. Used to swing a glass gate off.

• Width: 1500mm
• Height: 1200mm
• Thickness: 12mm
• Weight: 54kg
• Holes: 4 x 14mm Holes to fix glass gate hinges

Suitable for installation with:

• Friction Spigots
• Deck Mount Channel

Used for:

• Glass Pool Fencing

It can be installed with a Top Mounted Rail

Glass is certified to Australian Standards

947(w)x2050(h)x10mm Glass Shower Screen Return/Fixed Panel

This panel can be used as a return panel when installing a corner shower or a fixed panel when installing a single panel screen.

• Width: 947mm
• Height: 2050mm
• Thickness: 10mm
• Weight: 48kg
• Allow a 3mm Gap between the wall and glass and a 3mm Gap between this panel and the door.

Installation Widths:

• 950mm when installing with a wall bracket
• 957-960mm when installing with 19mm U Channel
• 957-972mm when installing with 35mm U Channel

Wall Bracket - Chrome Plated - For Shower Screen

Used to fix Hinge and Return/Fixed panels to the wall.

3 Per Panel recommended

• Wall Bracket
• 3mm Gap between glass and wall
• Chrome Plated Finish
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• 2 x Compression/Friction screws
• No holes in glass required
• Made from solid brass
• 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

Round Matt Black Shower Screen Door Knob

• Round with finger notch Knob for Shower Screen Door
• Matt Black Finish
• Double pull knob
• Suits 8mm, 10mm and 12mm thick glass
• Requires a 12mm Hole in the Glass
• Made from Solid Brass
• Nylon spacers and gaskets included to prevent glass/metal contact

38mm Diameter Adjustable Body Standoff for Face Mount Glass Balustrade / Pool Fence

• 38mm Diameter
• Adjusts between 23 and 40mm
• Ideal for fixing to an uneven surface
• Requires a 20-22mm Diameter hole in the glass
• Install using M12 Threaded Rod into masonry
• Install using M12 Metric to Lag Screw into timber
• Kit includes: Cap, Body, 2 x Plastic Washers and 1 x Bush
• For Face Mount Glass Balustrade / Pool Fence

1600 x 1200 x 12mm Glass Pool Fence Hinge Panel

Glass Gate Hinge Panel. Used to swing a glass gate off.

• Width: 1600mm
• Height: 1200mm
• Thickness: 12mm
• Weight: 58kg
• Holes: 4 x 14mm Holes to fix glass gate hinges

Suitable for installation with:

• Friction Spigots
• Deck Mount Channel

Used for:

• Glass Pool Fencing

It can be installed with a Top Mounted Rail

Glass is certified to Australian Standards

Round Recessed Matt Black Shower Screen Door Knob

• Round Recessed Knob for Shower Screen Door
• Matt Black Finish
• Double pull knob
• Suits 8mm, 10mm and 12mm thick glass
• Requires a 12mm hole in the glass
• Made from Solid Brass
• Nylon spacers and gaskets included to prevent glass/metal contact

972(w)x2050(h)x10mm Glass Shower Screen Return/Fixed Panel

This panel can be used as a return panel when installing a corner shower or a fixed panel when installing a single panel screen.

• Width: 972mm
• Height: 2050mm
• Thickness: 10mm
• Weight: 50kg
• Allow a 3mm Gap between this panel and the door.

Installation Widths:

• 975mm when installing with a wall bracket
• 982-985mm when installing with 19mm U Channel
• 982-997mm when installing with 35mm U Channel

38mm Diameter x 25mm Body Standoff for Face Mount Glass Balustrade / Pool Fence

• 38mm Diameter
• 25mm High Body
• Requires a 20mm Diameter hole in the glass
• Install using M12 Threaded Rod into masonry
• Install using  M12 Metric to Lag Screw into timber
• Kit includes: Cap, Body, 2 x Plastic Washers and 1 x Bush
• For Face Mount Glass Balustrade / Pool Fence

M12 Fixing sold separately

997(w)x2050(h)x10mm Glass Shower Screen Return/Fixed Panel

This panel can be used as a return panel when installing a corner shower or a fixed panel when installing a single panel screen.

• Width: 997mm
• Height: 2050mm
• Thickness: 10mm
• Weight: 51kg
• Allow a 3mm Gap between the wall and glass and a 3mm Gap between this panel and the door.

Installation Widths:

• 1000mm when installing with a wall bracket
• 1007-1010mm when installing with 19mm U Channel
• 1007-1022mm when installing with 35mm U Channel

Square L Shape Matt Black Shower Screen Door Knob

• Square L Shape Knob for Shower Screen Door
• Matt Black Finish
• Double pull knob
• Suits 8mm, 10mm and 12mm thick glass
• Requires a 12mm hole in the glass
• Made from Solid Brass
• Nylon spacers and gaskets included to prevent glass/metal contact

38mm Diameter Round Offset Fixed Bracket - Suits Round and Flat Rails

• 38mm Diameter Round Cap
• Suits round or flat rails
• Includes 3 Saddles 38mm, 50mm and Flat. You can simply change the saddle to use with different profile handrails.

• Requires a 20mm Diameter Hole in the glass

1700 x 1200 x 12mm Glass Pool Fence Hinge Panel

Glass Gate Hinge Panel. Used to swing a glass gate off.

• Width: 1700mm
• Height: 1200mm
• Thickness: 12mm
• Weight: 61kg
• Holes: 4 x 14mm Holes to fix glass gate hinges

Suitable for installation with:

• Friction Spigots
• Deck Mount Channel

Used for:

• Glass Pool Fencing

It can be installed with a Top Mounted Rail

Glass is certified to Australian Standards

38mm Diameter x 45mm Body Standoff for Face Mount Glass Balustrade / Pool Fence

• 38mm Diameter
• 45mm High Body
• Requires a 20mm Diameter hole in the glass
• Install using M12 Threaded Rod into masonry
• Install using M12 Metric to Lag Screw into timber
• Kit includes: Cap, Body, 2 x Plastic Washers and 1 x Bush
• For Face Mount Glass Balustrade / Pool Fence

M12 Fixing sold separately

1800 x 1200 x 12mm Glass Pool Fence Hinge Panel

Glass Gate Hinge Panel. Used to swing a glass gate off.

• Width: 1800mm
• Height: 1200mm
• Thickness: 12mm
• Weight: 65kg
• Holes: 4 x 14mm Holes to fix glass gate hinges

Suitable for installation with:

• Friction Spigots
• Deck Mount Channel

Used for:

• Glass Pool Fencing

It can be installed with a Top Mounted Rail

Glass is certified to Australian Standards

Square Chrome Shower Screen Door Handle

• Square D Handle Shower Screen Door Handle
• Stainless steel in a mirror finish
• Back to back pull handles
• Suits 8mm, 10mm and 12mm thick glass
• Requires 2 x 12mm holes at 155mm centres
• Nylon spacers and gaskets included to prevent glass/metal contact

1022(w)x2050(h)x10mm Glass Shower Screen Return/Fixed Panel

This panel can be used as a return panel when installing a corner shower or a fixed panel when installing a single panel screen.

• Width: 1022mm
• Height: 2050mm
• Thickness: 10mm
• Weight: 52kg
• Allow a 3mm Gap between this panel and the door.

When installed using Wall Brackets:

Installation Widths:

• 1025mm when installing with a wall bracket
• 1032-1035mm when installing with 19mm U Channel
• 1032-1047mm when installing with 35mm U Channel

Polaris 125 Series Glass/Glass Hinges

The Polaris Soft Close Hinge is a state-of-the-art product unrivaled in design, style and safety

The Polaris soft close hinge is the safest and most reliable specially designed pool fence hinge in the industry that complies with the stringent Australian Standards AS1926 and AS 2820.

• New and improved 125 series hinge is now made with duplex SS2205 stainless steel
• Improved design features including commercial rated adjustable tension spring (tempered SS304) with multiple spring closing settings (soft, medium & strong) and the highest quality
• European made dampeners for smooth, soft close action
• Self closing hinge suitable for 10mm and 12mm thick glass gates
• Revolutionary anti-drop gate packing system significantly lowers the chance of gates dropping or sagging over time
• Easy installation process – install guide included in each box
• Available in polish, satin, matt black and matt white finishes

50mm Diameter Adjustable Body Standoff for Face Mount Glass Balustrade / Pool Fence

• 50mm Diameter
• Adjusts between 23 and 40mm
• Ideal for fixing to an uneven surface
• Requires a 20-22mm Diameter hole in the glass
• Install using M12 Threaded Rod for masonry
• Install using M12 Metric to Lag Screw for timber
• Kit includes: Cap, Body, 2 x Plastic Washers and 1 x Bush
• For Face Mount Glass Balustrade / Pool Fence

1047(w)x2050(h)x10mm Glass Shower Screen Return/Fixed Panel

This panel can be used as a return panel when installing a corner shower or a fixed panel when installing a single panel screen.

• Width: 1047mm
• Height: 2050mm
• Thickness: 10mm
• Weight: 54kg
• Allow a 3mm Gap between the wall and glass and a 3mm Gap between this panel and the door.

Installation Widths:

• 1050mm when installing with a wall bracket
• 1057-1060mm when installing with 19mm U Channel
• 1057-1072mm when installing with 35mm U Channel

Polaris 125 Series Glass/Wall Hinges

The Polaris Soft Close Hinge is a state-of-the-art product unrivaled in design, style and safety

The Polaris soft close hinge is the safest and most reliable specially designed pool fence hinge in the industry that complies with the stringent Australian Standards AS1926 and AS 2820.

• New and improved 125 series hinge is now made with duplex SS2205 stainless steel
• Improved design features including commercial rated adjustable tension spring (tempered SS304) with multiple spring closing settings (soft, medium & strong) and the highest quality
• European made dampeners for smooth, soft close action
• Self closing hinge suitable for 10mm and 12mm thick glass gates
• Revolutionary anti-drop gate packing system significantly lowers the chance of gates dropping or sagging over time
• Easy installation process – install guide included in each box
• Available in polish, satin, matt black and matt white finishes

50mm Diameter x 30mm Body Standoff for Face Mount Glass Balustrade / Pool Fence

• 50mm Diameter
• 30mm High Body
• Requires a 20-22mm Diameter hole in the glass
• Install using M12 Threaded Rod into masonry
• Install using M12 Metric to Lag Screw into timber
• Kit includes: Cap, Body, 2 x Plastic Washers and 1 x Bush
• For Face Mount Glass Balustrade / Pool Fence

M12 Fixing rods sold separately

1097(w)x2050(h)x10mm Glass Shower Screen Return/Fixed Panel

This panel can be used as a return panel when installing a corner shower or a fixed panel when installing a single panel screen.

• Width: 1097mm
• Height: 2050mm
• Thickness: 10mm
• Weight: 57kg
• Allow a 3mm Gap between the wall and glass and a 3mm Gap between this panel and the door.

Installation Widths:

• 1100mm when installing with a wall bracket
• 1107-1110mm when installing with 19mm U Channel
• 1107-1122mm when installing with 35mm U Channel

Small Glass Brace Bracket - Chrome Plated - For Shower Screen

Used to stiffen and brace a return or hinge panel by fixing a brace panel along the top and tying them together.

Can also be used to tie a Fixed panel back to the wall.

• Small Glass Brace Bracket
• Square Finish Edges
• Brace 8mm thick glass hood to 10mm thick return & hinge panels
• 2 x compression/friction screws
• Slimline Design
• No holes required in glass
• Made from solid brass

Tip: Place bracket ensuring glass door does not hit when swinging inwards.

50mm Diameter x 50mm Body Standoff for Face Mount Glass Balustrade / Pool Fence

• 50mm Diameter
• 50mm High Body
• Requires a 20-22mm Diameter hole in the glass
• Install using M12 Threaded Rod into masonry
• Install using M12 Metric to Lag Screw into timber
• Kit includes: Cap, Body, 2 x Plastic Washers and 1 x Bush
• For Face Mount Glass Balustrade / Pool Fence

M12 Fixing sold separately

1147(w)x2050(h)x10mm Glass Shower Screen Return/Fixed Panel

This panel can be used as a return panel when installing a corner shower or a fixed panel when installing a single panel screen.

• Width: 1147mm
• Height: 2050mm
• Thickness: 10mm
• Weight: 59kg
• Allow a 3mm Gap between the wall and glass and a 3mm Gap between this panel and the door.

Installation Widths:

• 1150mm when installing with a wall bracket
• 1157-1160mm when installing with 19mm U Channel
• 1157-1172mm when installing with 35mm U Channel

40mm Square Cap x 30mm Body Standoff for Face Mount Glass Balustrade / Pool Fence

• 40mm Square Cap
• 30mm High Body
• Requires a 20-22mm Diameter hole in the glass
• Install using M12 Threaded Rod for Masonry
• Install using M12 Metric to Lag Screw for timber
• Kit includes: Cap, Body, 2 x Plastic Washers and 1 x Bush
• For Face Mount Glass Balustrade / Pool Fence

M12 Fixing rods sold separately