sales@diyglass.com.auCALL: Luke on 0414 266 624

Face Mount Glass Balustrade
Using Spigots

 

Step 3. You're Almost There

Now comes the fun part of choosing your handrail profile and doing the calculations for the glass panels required.

If you haven't already done so, now would be a good time to take some measurements and do a layout drawing. It is important to indicate any existing posts, walls, steps as these will all influence your requirements.

You will first need to do the calculations for the panel sizes. Once you have determined these you will need to double the number of panels to calculate the number of spigots required.

1200mm High Glass Panels

We have over 35 standard size glass panels available that are 12000mm high and range in width from 200mm to 2000mm.
These panels are suitable for use with friction spigots, channel, glass clamp and slotted tube posts. As they do not have any holes so if you wish to install a top rail you will need to use Slotted tube.

Click Here

Top Mount Glass Rails

There are 5 different profiles of top mount handrails that can be used. Each profile has a slot along the bottom that sits over the glass.

Profiles available:

 

Click Here