Gunmetal Grey Frameless Glass Shower Screen Hardware

Gunmetal Grey Glass Shower Screen Wall Bracket

Used to fix Hinge and Return/Fixed panels to the wall.

3 Per Panel recommended

• Wall Bracket
• 3mm Gap between glass and wall
• Gunmetal Grey Finish
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• 2 x Compression/Friction screws
• No holes in glass required
• Made from solid brass
• 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

Gunmetal Grey Glass Shower Screen Offset Wall Bracket

Used to fix Hinge and Return/Fixed panels to the wall in a shower screen.

3 Per Panel recommended

These are easier to install then the hidden screw wall bracket. The screw can be marked and installed with the glass standing in place.

• Offset Wall Bracket for Shower Screens
• Gunmetal Grey Finish
• 3mm Gap between glass and wall
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• 2 x Compression/Friction screws
• No holes in glass required
• Made from solid brass
• 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used.

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

Gunmetal Grey Glass to Glass Shower Screen Door Hinge

2 required per door

• Glass to Glass Hinge
• Gunmetal Grey Finish
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards (90 Degrees inwards and Outwards)
• Will hold door at 90 degrees inwards, 90 Degree Outwards and 180 Degrees closed.
• Made from solid brass
• Allen Key & Gaskets included

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

Gunmetal Grey Glass Shower Screen 135 Degree Door Hinge

2 required per door

• 135 Degree Glass to Glass Hinge
• Gunmetal Grey Finish
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards
• Made from solid brass

Custom Mitre cut glass required for Hinge Panel

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

Gunmetal Grey Wall to Glass Shower Screen Door Hinge

2 required per door

• Wall to Glass Hinge
• Gunmetal Grey Finish
• 4 x Fixing Holes
• Allow 9mm gap between Wall and Glass
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards
• Made from solid brass
• Fixing Screws included
• Allen Key & Gaskets included

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

Gunmetal Grey Glass Shower Screen Offset Wall to Glass Door Hinge

2 required per door

• Gunmetal Grey Finish
• Offset Wall to Glass Hinge
• 3 x Fixing Holes
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards
• Made from solid brass
• Fixing Screws included
• Allen Key & Gaskets included

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

Gunmetal Grey Round Glass Shower Screen Door Knob

• Round Knob for Glass Shower Screen Door
• Gunmetal Grey Finish
• Double pull knob
• Suits 8mm, 10mm and 12mm thick glass
• Requires a 12mm hole in the door
• Made from Solid Brass
• Nylon spacers and gaskets included to prevent glass/metal contact

Gunmetal Grey Small Glass Brace Bracket

Used to stiffen and brace a return or hinge panel by fixing a brace panel along the top and tying them together.

Can also be used to tie a Fixed panel back to the wall.

• Small Glass Brace Bracket
• Square Finish Edges
• Brace 8mm thick glass hood to 10mm thick return & hinge panels
• 2 x compression/friction screws
• Slimline Design
• No holes required in glass

Tip: Place bracket ensuring glass door does not hit when swinging inwards.

Gunmetal Grey Large Glass Brace Bracket

Used to stiffen and brace a return or hinge panel by fixing a brace panel along the top and tying them together.

Can also be used to tie a Fixed panel back to the wall.

• Small Glass Brace Bracket
• Square Finish Edges
• Brace 8mm thick glass hood to 10mm thick return & hinge panels
• 4 x compression/friction screws
• Sturdy design
• No holes required in glass

Tip: Place bracket ensuring glass door does not hit when swinging inwards.

Gunmetal Grey Glass to Back Wall Brace Bracket

Used to stiffen and brace a Return/Fixed panel by tying it to the wall.

• Back Wall to Glass support arm
• Double adjustability for easy installation. Adjustable at wall & at glass
• Hidden fixing wall installation for a neat finish.
• Suitable for 8 and 10mm thick glass
• Compression/friction screws secure to the glass. No holes in glass required

Gunmetal Grey Glass to Wall Adjustable Horizontal Glass Shower Screen Support Arm

Used to stiffen and brace a Return/Fixed panel by connecting it to the adjacent wall.

• Adjacent Wall to Glass support arm
• Adjustable length by cutting the tube to the required length.
• Maximum width of 1200mm
• Hidden fixing wall installation for a neat finish.
• Suitable for 8 and 10mm thick glass
• Compression/friction screws secure to the glass. No holes in glass required