sales@diyglass.com.auCALL: Luke on 0414 266 624

Cart empty

 x 
Show Cart

Matt White Frameless Glass Shower Screen Hardware

Subtle yet modern, matt white represents the epitome of contemporary style.

With an increasing appeal to pare back and simplify, matt white is the new go to shade

·         O.R.B Matt white finish – High quality white coating with a clear lacquer coating over the top then baked on

·         Common process for furniture and bathroom fittings.

·         Maintenance - Clean with soapy water and avoid any abrasive or strong chemical cleaners  

p-sb-1.5mm-20pk

20 x 1.5mm Thick Glass Setting Blocks

  • 1.5mm THICK x 10mm WIDE x 50mm LONG CLEAR SETTING BLOCKS
  • Pack of 20
  • Install under any Hinge or Fixed panel to prevent it from sitting directly onto the tiles
  • These are clear so will remain under the glass once the silicon has been applied

$ 2.50
Matt White Glass Shower Screen Wall Bracket

Matt White Glass Shower Screen Wall Bracket

Used to fix Hinge and Return/Fixed panels to the wall.

3 Per Panel recommended

  • Wall Bracket
  • 3mm Gap between glass and wall
  • Matt White Finish
  • Square Finish Edges
  • Suitable for 8mm & 10mm Glass
  • 2 x Compression/Friction screws
  • No holes in glass required
  • Made from solid brass
  • 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

$ 12.00
Matt White Glass Shower Screen Offset Wall Bracket

Matt White Glass Shower Screen Offset Wall Bracket

Used to fix Hinge and Return/Fixed panels to the wall in a shower screen.

3 Per Panel recommended

These are easier to install then the hidden screw wall bracket. The screw can be marked and installed with the glass standing in place.

  • Offset Wall Bracket for Shower Screens
  • Matt White Finish
  • 3mm Gap between glass and wall
  • Square Finish Edges
  • Suitable for 8mm & 10mm Glass
  • 2 x Compression/Friction screws
  • No holes in glass required
  • Made from solid brass
  • 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used.

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

$ 17.00
Matt White Glass to Glass Shower Screen Door Hinge

Matt White Glass to Glass Shower Screen Door Hinge

2 required per door

  • Glass to Glass Hinge
  • Matt White Finish
  • Square Finish Edges
  • Suitable for 8mm & 10mm Glass
  • "D" Style Glass Cutouts
  • Self Closing from approximately 25 Degrees
  • Dual Action - opens inwards and outwards (90 Degrees inwards and Outwards)
  • Will hold door at 90 degrees inwards, 90 Degree Outwards and 180 Degrees closed.
  • Made from solid brass
  • Allen Key & Gaskets included

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

$ 79.00
Matt White Glass Shower Screen 135 Degree Door Hinge

Matt White Glass Shower Screen 135 Degree Door Hinge

2 required per door

  • 135 Degree Glass to Glass Hinge
  • Matt White Finish
  • Square Finish Edges
  • Suitable for 8mm & 10mm Glass
  • "D" Style Glass Cutouts
  • Self Closing from approximately 25 Degrees
  • Dual Action - opens inwards and outwards
  • Made from solid brass

Custom Mitre cut glass required for Hinge Panel

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

$ 86.00
P-SNO-H-WP

Matt White Wall to Glass Shower Screen Door Hinge

2 required per door

  • Wall to Glass Hinge
  • Matt White Finish
  • 4 x Fixing Holes
  • Allow 9mm gap between Wall and Glass
  • Square Finish Edges
  • Suitable for 8mm & 10mm Glass
  • "D" Style Glass Cutouts
  • Self Closing from approximately 25 Degrees
  • Dual Action - opens inwards and outwards
  • Made from solid brass
  • Fixing Screws included
  • Allen Key & Gaskets included

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

$ 52.00
Matt White Glass Shower Screen Offset Wall to Glass Door Hinge

Matt White Glass Shower Screen Offset Wall to Glass Door Hinge

2 required per door

  • Matt White Finish
  • Offset Wall to Glass Hinge
  • 3 x Fixing Holes
  • Square Finish Edges
  • Suitable for 8mm & 10mm Glass
  • "D" Style Glass Cutouts
  • Self Closing from approximately 25 Degrees
  • Dual Action - opens inwards and outwards
  • Made from solid brass
  • Fixing Screws included
  • Allen Key & Gaskets included

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

$ 52.00
Matt White 19mm Wide 2100mm Long Shower Screen Wall Channel

Matt White 19mm Deep 2100mm Long Shower Screen Wall Channel

  • 19mm Slimline Aluminium Channel
  • Adds 8mm to the overall glass width
  • Matt White Finish
  • Dry Glaze System - No need for silicon in glass
  • Suits 10mm Glass
  • Consider using where the wall is out of square (up to 6mm) or where a slimline channel looks is desired
  • Unique Aluminium extrusion has internal ribs which hold secure 2part Clear Glazing PVC
  • Fast Installation
  • U-Channel & 2 Part Glazing PVC Included

$ 52.00
Matt White 35mm Deep 2100mm Long Shower Screen Wall Channel

Matt White 35mm Deep 2100mm Long Shower Screen Wall Channel

  • 35mm Deep Aluminium Channel
  • Adds 10mm to 25mm to the overall glass width
  • Matt White Finish
  • Dry Glaze System - No need for silicon in glass
  • Suits 10mm Glass
  • Consider using where the wall is out of square (up to 15mm) or where a slimline channel looks is desired
  • Unique Aluminium extrusion has internal ribs which hold secure 2part Clear Glazing PVC
  • Fast Installation
  • U-Channel & 2 Part Glazing PVC Included

$ 67.00
Matt White Round Glass Shower Screen Door Knob

Matt White Round Glass Shower Screen Door Knob

  • Round Knob for Glass Shower Screen Door
  • Matt White Finish
  • Double pull knob
  • Suits 8mm, 10mm and 12mm thick glass
  • Requires a 12mm hole in the door
  • Made from Solid Brass
  • Nylon spacers and gaskets included to prevent glass/metal contact

$ 17.00
Matt White Glass to Back Wall Brace Bracket - For Shower Screen

Matt White Glass to Back Wall Brace Bracket

Used to stiffen and brace a Return/Fixed panel by tying it to the wall.

  • Back Wall to Glass support arm
  • Double adjustability for easy installation. Adjustable at wall & at glass
  • Hidden fixing wall installation for a neat finish.
  • Suitable for 8 and 10mm thick glass
  • Compression/friction screws secure to the glass. No holes in glass required

$ 58.00
Matt White Glass to Wall Adjustable Horizontal Glass Shower Screen Support Arm

Matt White Glass to Wall Adjustable Horizontal Glass Shower Screen Support Arm

Used to stiffen and brace a Return/Fixed panel by connecting it to the adjacent wall.

  • Adjacent Wall to Glass support arm
  • Adjustable length by cutting the tube to the required length.
  • Maximum width of 1200mm
  • Hidden fixing wall installation for a neat finish.
  • Suitable for 8 and 10mm thick glass
  • Compression/friction screws secure to the glass. No holes in glass required

$ 74.00
Matt White Small Glass Brace Bracket

Matt White Small Glass Brace Bracket

Used to stiffen and brace a return or hinge panel by fixing a brace panel along the top and tying them together.

Can also be used to tie a Fixed panel back to the wall.

  • Small Glass Brace Bracket
  • Square Finish Edges
  • Brace 8mm thick glass hood to 10mm thick return & hinge panels
  • 2 x compression/friction screws
  • Slimline Design
  • No holes required in glass

Tip: Place bracket ensuring glass door does not hit when swinging inwards.

$ 23.00
Matt White Large Glass Brace Bracket

Matt White Large Glass Brace Bracket

Used to stiffen and brace a return or hinge panel by fixing a brace panel along the top and tying them together.

Can also be used to tie a Fixed panel back to the wall.

  • Small Glass Brace Bracket
  • Square Finish Edges
  • Brace 8mm thick glass hood to 10mm thick return & hinge panels
  • 4 x compression/friction screws
  • Sturdy design
  • No holes required in glass

Tip: Place bracket ensuring glass door does not hit when swinging inwards.

$ 33.00