Deluxe Matt White Glass to Glass 90 Degree External Latch

• Glass to Glass at a 90 Degree External Angle Latch
• Use for Glass Pool Fence Gate or Glass Balustrade Gate
• Latch and Backing plates are Matt White
• Requires Gate to be drilled (2 x 10mm Holes, 20mm in from edge and 42mm apart)
• Latch Panel must be 12mm - No holes required
• Suits 8, 10 and 12mm gates
• For best results leave a 9mm gap between the gate and latch panel

View Technical Drawings Here

View Installation Instructions Here

Polished Glass to Glass 90 Degree Internal Angle Pool Fence Gate Latch

• Glass to Glass at a 90 Degree Internal Angle Latch
• Use for Glass Pool Fence Gate or Glass Balustrade Gate
• Backing Plates are Polished 316 Stainless Steel
• Latch is Black Polymer
• Requires Gate to be drilled (2 x 10mm Holes, 20mm in from edge and 42mm apart)
• Latch Panel must be 12mm - No holes required
• Suits 8, 10 and 12mm gates
• For best results leave a 9mm gap between the gate and latch panel

Deluxe Polished Glass to Glass 90 Degree Internal Angle Pool Fence Gate Latch

• Glass to Glass at a 90 Degree Internal Angle Latch
• Use for Glass Pool Fence Gate or Glass Balustrade Gate
• Requires Gate to be drilled (2 x 10mm Holes, 20mm in from edge and 42mm apart)
• Latch Panel must be 12mm - No holes required
• Suits 8, 10 and 12mm gates
• For best results leave a 9mm gap between the gate and latch panel

View Technical Drawings Here

View Installation Instructions Here

Satin Glass to Glass 90 Degree Internal Angle Pool Fence Gate Latch

• Glass to Glass at a 90 Degree Internal Angle Latch
• Use for Glass Pool Fence Gate or Glass Balustrade Gate
• Backing Plates are Satin Finish 316 Stainless Steel
• Latch is Black Polymer
• Requires Gate to be drilled (2 x 10mm Holes, 20mm in from edge and 42mm apart)
• Latch Panel must be 12mm - No holes required
• Suits 8, 10 and 12mm gates
• For best results leave a 9mm gap between the gate and latch panel

Deluxe Satin Glass to Glass 90 Degree Internal Angle Pool Fence Gate Latch

• Glass to Glass at a 90 Degree Internal Angle Latch
• Use for Glass Pool Fence Gate or Glass Balustrade Gate
• Requires Gate to be drilled (2 x 10mm Holes, 20mm in from edge and 42mm apart)
• Latch Panel must be 12mm - No holes required
• Suits 8, 10 and 12mm gates
• For best results leave a 9mm gap between the gate and latch panel

View Technical Drawings Here

View Installation Instructions Here

Black Glass to Glass 90 Degree Internal Angle Pool Fence Gate Latch

• Glass to Glass at a 90 Degree Internal Angle Latch
• Use for Glass Pool Fence Gate or Glass Balustrade Gate
• Backing Plates are Black Powder Coated 316 Stainless Steel
• Latch is Black Polymer
• Requires Gate to be drilled (2 x 10mm Holes, 20mm in from edge and 42mm apart)
• Latch Panel must be 12mm - No holes required
• Suits 8, 10 and 12mm gates
• For best results leave a 9mm gap between the gate and latch panel

Black Deluxe Glass to Glass 90 Degree Internal Angle Pool Fence Gate Latch

• Glass to Glass at a 90 Degree Internal Angle Latch
• Use for Glass Pool Fence Gate or Glass Balustrade Gate
• Requires Gate to be drilled (2 x 10mm Holes, 20mm in from edge and 42mm apart)
• Latch Panel must be 12mm - No holes required
• Suits 8, 10 and 12mm gates
• For best results leave a 9mm gap between the gate and latch panel

View Technical Drawings Here

View Installation Instructions Here

White Glass to Glass 90 Degree Internal Angle Pool Fence Gate Latch

• Glass to Glass at a 90 Degree Internal Angle Latch
• Use for Glass Pool Fence Gate or Glass Balustrade Gate
• Backing Plates are White Powder Coated 316 Stainless Steel
• Latch is White Polymer
• Requires Gate to be drilled (2 x 10mm Holes, 20mm in from edge and 42mm apart)
• Latch Panel must be 12mm - No holes required
• Suits 8, 10 and 12mm gates
• For best results leave a 9mm gap between the gate and latch panel

White Deluxe Glass to Glass 90 Degree Internal Angle Pool Fence Gate Latch

• Glass to Glass at a 90 Degree Internal Angle Latch
• Use for Glass Pool Fence Gate or Glass Balustrade Gate
• Requires Gate to be drilled (2 x 10mm Holes, 20mm in from edge and 42mm apart)
• Latch Panel must be 12mm - No holes required
• Suits 8, 10 and 12mm gates
• For best results leave a 9mm gap between the gate and latch panel

View Technical Drawings Here

View Installation Instructions Here

White Square Front, Flat Back Glass Clamp for Glass Balustrade / Pool Fence

White, Square Front, Flat Back Glass Clamp

• Flat back for installation onto timber or steel post or brick wall
• Use for Glass Balustrade / Pool Fence
• Suitable for 8, 10 and 12mm Glass - Gaskets provided
• Black Powder Coated 316 Marine Grade Stainless Steel

30x21mm 5800mm Long Slotted Rectangle Tube for 15mm Glass Balustrade

• Use for 15mm Glass Balustrade
• Fits directly onto the top of the glass
• 316 grade Stainless Steel
• 18mm wide x 14mm deep Slot
• Install with glazing rubber or silicon directly to the glass
• Available in Mirror or satin finish

2900mm length of Glazing Rubber to suit 30x21mm Rail

2900mm length of black glazing rubber. Use with 30x21mm top rail onto 15mm glass panels.

30x21mm Wall Plate for Glass Balustrade / Pool Fence Top Rail

• Used with 30x21mm Top Rai to attach the rail to flat post or wall
• Use for Glass Balustrade or Glass Pool Fence Top Rail
• 316 grade Stainless Steel
• Fit by Welding or epoxy glue
• Available in Mirror or satin finish

30x21mm Extended Wall Plate for Glass Balustrade / Pool Fence Top Rail

• Extended Wall Plate for use with 30x21mm Top Rail
• Used to attach rail to flat post or wall
• Use for Glass Balustrade or Glass Pool Fence Top Rail
• 316 grade Stainless Steel
• Fit by Welding or epoxy glue
• Available in Mirror or satin finish

30x21mm End Cap for Glass Balustrade / Pool Fence Top Rail

• End Cap for use with 30x21mm Slotted Rail
• 316 grade Stainless Steel
• Use for Glass Balustrade or Glass Pool Fence Top Rail
• Fit by Welding or epoxy glue
• Available in Mirror or satin finish

30x21mm 90 Degree Joiner for Glass Balustrade / Pool Fence Top Rail

• Joins 30x21mm Slotted Tube at a 90 degree angle (on a corner)
• 316 grade Stainless Steel
• Fit by Welding or epoxy glue
• Available in Mirror or satin finish

30x21mm Adjustable Horizontal Joiner for Glass Balustrade / Pool Fence Top Rail

• Joins 30x21mm Slotted Tube at a Corner that is not 90 degrees
• Use for Glass Balustrade or Glass Pool Fence Top Rail
• 316 grade Stainless Steel
• Fit by Welding or epoxy glue
• Available in Mirror or satin finish

30x21mm Adjustable Vertical Joiner for Glass Balustrade / Pool Fence Top Rail

• Joins 30x21mm Slotted Tube at a change of Vertical Joiner (eg. Down Stairs)
• Use for Glass Balustrade or Glass Pool Fence Top Rail
• 316 grade Stainless Steel
• Fit by Welding or epoxy glue
• Available in Mirror or satin finish

30x21mm 90 Degree Vertical Joiner for Glass Balustrade / Pool Fence Top Rail

• Install with 30x21mm Slotted Rail
• Allows you to run the rail down the side of the glass edge
• 316 grade Stainless Steel
• Fit by epoxy glue

Square Base Plated Spigot For 15mm Glass Balustrade

• Easy Top Mount Base Plate Installation
• Use for 15mm Glass Balustrade
• Friction Fit Glass (no holes in glass required)
• Suits 15mm thick glass
• 2205 Grade Stainless Steel
• 45mm Front profile
• 4 x 11mm Counter Sunk Holes for timber screw or Countersunk bolt installation
• Load test certificates available if required.
• Available in Mirror, Satin, Matt Black and Matt White finishes

Click Here to view to Base Plate Spigot installation guide

Square Core Hole Stainless Spigot for 15mm Glass Balustrade

Square Core Hole Spigot for 15mm Glass

• Suits 15mm Thick Glass
• Friction Fit - No holes in Glass Required
• Use for Glass Balustrade
• 2205 Grade Stainless Steel
• 45mm Front profile
• Extension available for extra height or anchoring
• Use for Glass Balustrading
• Load test certificates available if required.
• Available in Mirror or Satin Finish

Click Here to view our Core Hole Installation Guide

Square Top Fix Spigot for 12mm to 17.52mm Glass

• Suits 12mm to 17.52mm Thick Glass 
• Friction Fit
• Ideal for steel beam installation: Bolt from underside of beam
• Made from Duplex Stainless Steel 2205 grade

Click Here to view the installation guide

Face Mount Spigots with Tilt Adjustment

• Duplex Stainless Steel 2205
• Face mount spigot – fix to vertical surface of concrete, timber/steel beams or bearers
• 2 part spigot for easy install: (1) rear plate fixed to vertical surface (2) spigot attaches to rear plate with 2 x M8 counter sunk screws
• Tilt Adjustable – innovative design allows for tilt adjustment by simply turning top & bottom M8 grub screws
• Glass alignment adjustability is a huge installation advantage
• Timber/beam fixing – 2 x fixing points in the rear plate for increased strength
• Concrete fixing – ideal for narrow slabs with 1 x sturdy M18 fixing
• Neat finish – slide in cover plate hides exposed screws on spigot front
• Earthing terminal included
• 3mm stackable horseshoe packers sold separately that can be inserted behind rear plate to overcome uneven vertical surfaces

Click Here to View Spigot Brochure

Click Here to View Installation Instructions

Square Base Plated Spigot for Glass Balustrade or Pool Fence

• Easy Top Mount Base Plate Installation
• Use for Glass Balustrade or Glass Pool Fence
• Friction Fit Glass (no holes in glass required)
• Suits 12mm thick glass
• 2205 Grade Stainless Steel
• 45mm Front profile
• 4 x 11mm Counter Sunk Holes for timber screw or Countersunk bolt installation
• Suitable for Glass Balustrade or Pool Fence Applications
• Load test certificates available if required.
• Available in Mirror or Satin Stainless, Matt Black and Matt White

Click Here to view to Base Plate Spigot installation guide

Round Base Plated Stainless Spigot for Glass Balustrade

Use on glass balustrading or pool fencing.

• Easy Top Mount Base Plate Installation
• Friction Fit Glass (no holes in glass required)
• Suits 12mm thick glass
• 2205 Grade Stainless Steel
• 50mm Front profile
• 4 x 11mm Counter Sunk Holes for timber screw or Countersunk bolt installation
• Suitable for Glass Balustrade or Pool Fence Applications
• Load test certificates& available if required.
• Available in Mirror or Satin finish.

Click Here to view our Base Plate Spigot Installation Guide

38mm Diameter x 25mm Body Standoff for Face Mount Glass Balustrade / Pool Fence

• 38mm Diameter
• 25mm High Body
• Requires a 20mm Diameter hole in the glass
• Install using M12 Threaded Rod into masonry
• Install using  M12 Metric to Lag Screw into timber
• Kit includes: Cap, Body, 2 x Plastic Washers and 1 x Bush
• For Face Mount Glass Balustrade / Pool Fence

M12 Fixing sold separately

End Post - Terminating - 2 Inch Round Glass Clamp for Stainless Top Rail

2" Round Glass Clamp End Post for Stainless Top Rail •Position: End •Use: Glass Balustrade •Material: 2" Mirror Finish Tube •Height: 970mm •Grade: 316 Marine Grade Stainless •Base: 3 Hole Round Flange •Top: 90 Degree Flush Joiner •Glass: Install with 850mm Glass Panels •Handrail: Install with 2 Inch Round Stainless Top Rail

End Post - 50x50 Square Glass Clamp for Stainless Rail

50x50 Square Glass Clamp End Post for Stainless Rail •Position: End •Use: Glass Balustrade •Material: 50x50 Satin Finish Stainless Steel •Height: 970mm •Grade: 316 Marine Grade Stainless •Base: 4 Hole Square Flange •Top: 90 Degree Flush Joiner •Glass: Install with 850mm Glass Panels •Handrail: Install with 50x50 Stainless Handrail

750 x 1200 x 8mm Glass Pool Fence Gate Panel

Glass Gate Panel.

• Width: 750mm
• Height: 1200mm
• Thickness: 8mm
• Weight: 18kg
• Hinge Holes: 4 x 10mm Holes to fix hinges
• Latch Holes: 2 x 10mm Holes to fix latch

Used for:

• Glass Pool Fencing

It can be installed with a Top Mounted Rail

Glass is certified to Australian Standards

229(w)x2050(h)x10mm Glass Shower Screen Hinge Panel

• Width: 229mm
• Height: 2050mm
• Thickness: 10mm
• Weight: 12kg
• Allow a 3mm Gap between the wall and glass and a 5mm Gap between this panel and the door.

When installed using Wall Brackets:

• When installed with a 600mm door in a corner configuration using a return panel the overall width will be 850mm
• When installed with a 600mm door between two wall the overall width will be 840mm

When installed using U Channel:

• When installed with a 600mm door in a corner configuration using a return panel the overall width will be 858mm
• When installed with a 600mm door between two wall the overall width will be 848mm

600(w)x2041(h)x10mm Glass Shower Screen Handle Open Door Panel

For use with a Door Handle.

• Width: 600mm
• Height: 2041mm
• Thickness: 10mm
• Weight: 31kg
• Can be swung off a wall or a hinge panel

Requires 1 x Door Handle and 2 x Hinges.

Glass to Glass Chrome Shower Screen Door Hinge

2 required per door

• Glass to Glass Hinge
• Chrome Plated Finish
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards (90 Degrees inwards and Outwards)
• Will hold door at 90 degrees inwards, 90 Degree Outwards and 180 Degrees closed.
• Made from solid brass
• Allen Key & Gaskets included

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

Glass to Glass Matt Black Shower Screen Door Hinge

2 required per door

• Glass to Glass Hinge
• Matt Black Finish
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards
• Made from solid brass
• Allen Key & Gaskets included

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

Round Double Friction Base Plate Pool Fence Spigot

Use on glass pool fencing.

• Double Friction for easy glass alignment (glass can be adjusted in both directions)

• Includes Cover
• Easy Top Mount Base Plate Installation
• Friction Fit Glass (no holes in glass required)
• Contemporary tapered top to comply with ‘no toe hole’ requirements
• Suits 12mm thick glass
• 2205 Grade Stainless Steel
• 50mm Front profile
• Base plate has 4x countersunk holes to enable flush fixing
• Tapered packer included (1mm to 1.5mm) to enable tilt adjustment of glass
• Suitable for Glass Pool Fence Applications
• Load test certificates available if required.
• Available in Mirror or Satin finish.

197(w)x2050(h)x10mm Glass Shower Screen Return/Fixed Panel

This panel can be used as a return panel when installing a corner shower or a fixed panel when installing a single panel screen.

• Width: 197mm
• Height: 2050mm
• Thickness: 10mm
• Weight: 10kg
• Allow a 3mm Gap between the wall and glass and a 3mm Gap between this panel and the door.

Installation Widths:

• 200mm when installing with a wall bracket
• 207-210mm when installing with 19mm U Channel
• 207-222mm when installing with 35mm U Channel

400x1280 x 15mm Glass With 4 x Bottom Holes for Standoffs

• Width: 400mm
• Height: 1280mm
• Thickness: 15mm
• 4 x 22mm holes for Standoffs

Suitable for installation with:

• Glass Standoffs
• Top Mount Rail

Square Cover for Square Base Plated Spigot

Neatly fits over our Square Base Plate Spigot to cover base plate screws

25x21mm 5800mm Long Slotted Rectangle Tube for Glass Balustrade / Pool Fence Top Rail

• Use for Glass Balustrade or Glass Pool Fence Top Rail
• Fits directly onto the top of the glass
• 316 grade Stainless Steel
• 14x14mm Slot
• Install with glazing rubber or silicon directly to the glass
• Available in Mirror or satin finish

38mm 5800mm Long Slotted Round Tube for Glass Balustrade / Pool Fence Top Rail

• 38mm 5800mm Long Slotted Tube
• Use for Glass Balustrade or Glass Pool Fence Top Rail
• Fits directly onto the top of the glass
• 316 grade Stainless Steel
• 15x15mm Slot
• Install with glazing rubber or silicon directly to the glass
• Available in Mirror or satin finish

Cover for Round Spigots

Neatly fits over core hole or base plate spigot to hide fixing.

38mm 5800mm Long Round Tube for Glass Balustrade Offset Rail

• 38mm 5800mm Long Round Tube
• 316 grade Stainless Steel
• Available in Mirror or satin finish

834 x 1200 x 8mm Glass Pool Fence Gate Panel

Glass Gate Panel.

• Width: 834mm
• Height: 1200mm
• Thickness: 8mm
• Weight: 20kg
• Hinge Holes: 4 x 10mm Holes to fix hinges
• Latch Holes: 2 x 10mm Holes to fix latch

Used for:

• Glass Pool Fencing

It can be installed with a Top Mounted Rail

Glass is certified to Australian Standards

279(w)x2050(h)x10mm Glass Shower Screen Hinge Panel

• Width: 279mm
• Height: 2050mm
• Thickness: 10mm
• Weight: 14kg
• Allow a 3mm Gap between the wall and glass and a 5mm Gap between this panel and the door.

When installed using Wall Brackets:

• When installed with a 600mm door in a corner configuration using a return panel the overall width will be 900mm
• When installed with a 600mm door between two wall the overall width will be 890mm

When installed using U Channel:

• When installed with a 600mm door in a corner configuration using a return panel the overall width will be 908mm
• When installed with a 600mm door between two wall the overall width will be 898mm

600(w)x2041(h)x10mm Glass Shower Screen Knob Open Door Panel

For use with a Single Door Knob.

• Width: 600mm
• Height: 2041mm
• Thickness: 10mm
• Weight: 31kg
• Can be swung off the wall or a hinge panel

Requires 1 x Door Knob and 2 x Hinges.

135 Degree Glass to Glass Matt Black Shower Screen Door Hinge

2 required per door

• 135 Degree Glass to Glass Hinge
• Matt Black Finish
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards
• Made from solid brass

Custom Mitre cut glass required for Hinge Panel

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

Bostik V60 Transparent Glazing Silicone

Bostik V60 Transparent Glazing Silicon
Premium Grade Neutral Cure Glazing Silicon Sealant

Suitable for:

• Glazing top rails to glass balustrade panels
• Glazing Shower Screen glass to tiles

End Post - Over Run - 50x50 Square Glass Clamp for Stainless Rail

50x50 Square Glass Clamp End Post for Stainless Rail •Position: End - When over running top rail to connect to wall. •Use: Glass Balustrade •Material: 50x50 Satin Finish Stainless Steel •Height: 970mm •Grade: 316 Marine Grade Stainless •Base: 4 Hole Square Flange •Top: Perpendicular Joiner •Glass: Install with 850mm Glass Panels •Handrail: Install with 50x50 Stainless Handrail

End Post - Over Run - 2 Inch Round Glass Clamp for Stainless Top Rail

2" Round Glass Clamp End Post for Stainless Top Rail •Position: End - Where the rail over runs the post and connects to wall/square post. •Use: Glass Balustrade •Material: 2" Mirror Finish Tube •Height: 970mm •Grade: 316 Marine Grade Stainless •Base: 3 Hole Round Flange •Top: Perpendicular Joiner •Glass: Install with 850mm Glass Panels •Handrail: Install with 2 Inch Round Stainless Top Rail

Round Core Hole Pool Fence Spigot

Use on glass pool fencing.

• Double Friction for easy glass alignment (glass can be adjusted in both directions)

• Includes Cover
• Core Hole Installation
• Friction Fit Glass (no holes in glass required)
• Contemporary tapered top to comply with ‘no toe hole’ requirements
• Suits 12mm thick glass
• 2205 Grade Stainless Steel
• 50mm Front profile
• Tapered packer included (1mm to 1.5mm) to enable tilt adjustment of glass
• Suitable for Glass Pool Fence Applications
• Load test certificates available if required.
• Available in Mirror or Satin finish.

Black 38mm Diameter x 25mm Body Standoff for Face Mount Glass Balustrade / Pool Fence

• Black
• 38mm Diameter
• 25mm High Body
• Requires a 20mm Diameter hole in the glass
• Install using M12 Threaded Rod into masonry
• Install using  M12 Metric to Lag Screw into timber
• Kit includes: Cap, Body, 2 x Plastic Washers and 1 x Bush
• For Face Mount Glass Balustrade / Pool Fence

M12 Fixing sold separately

297(w)x2050(h)x10mm Glass Shower Screen Return/Fixed Panel

This panel can be used as a return panel when installing a corner shower or a fixed panel when installing a single panel screen.

• Width: 297mm
• Height: 2050mm
• Thickness: 10mm
• Weight: 15kg
• Allow a 3mm Gap between the wall and glass and a 3mm Gap between this panel and the door.

Installation Widths:

• 300mm when installing with a wall bracket
• 307-310mm when installing with 19mm U Channel
• 307-322mm when installing with 35mm U Channel

3 Way Glass to Glass Chrome Shower Screen Door Hinge

2 required per door

• 3 Way Glass to Glass Hinge allows for 2 x Doors from 1 x Hinge Panel
• Chrome Plated Finish
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards (90 Degrees inwards and Outwards)
• Will hold door at 90 degrees inwards, 90 Degree Outwards and 180 Degrees closed.
• Made from solid brass
• Allen Key & Gaskets included

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

500x1280 x 15mm Glass With 4 x Bottom Holes for Standoffs

• Width: 500mm
• Height: 1280mm
• Thickness: 15mm
• 4 x 22mm holes for Standoffs

Suitable for installation with:

• Glass Standoffs
• Top Mount Rail

Sliding Shower Installation Kit

Kit Includes:

• 2 x Door Upper Rollers
• 2 x Door Stabiliser Guides
• 2 x Fixed Panel Rail Connectors
• 2 x Stoppers
• 1 x Recessed Round Handle
• 1 x Floor Guide
• 2 x Rail Wall Brackets

38mm Slotted In-Line Joiner for Glass Balustrade / Pool Fence Top Rail

• Joins 2 straight lengths of 38mm Slotted Tube
• Use for Glass Balustrade or Glass Pool Fence Top Rail
• 316 grade Stainless Steel
• Fit by Welding or epoxy glue
• Available in Mirror or satin finish

38mm In-Line Joiner for Glass Balustrade Offset Rail

• Joins 2 straight lengths of 38mm Tube
• 316 grade Stainless Steel
• Fit by Welding or epoxy glue
• Available in Mirror or satin finish

Centre Post - 2 Inch Round Glass Clamp for Stainless Top Rail

2" Round Glass Clamp Centre Post for Stainless Top Rail •Position: Centre •Use: Glass Balustrade •Material: 2" Mirror Finish Tube •Height: 970mm •Grade: 316 Marine Grade Stainless •Base: 4 Hole Square Flange •Top: Perpendicular Joiner •Glass: Install with 850mm Glass Panels •Handrail: Install with 2 Inch Round Stainless Top Rail The perpendicular joiner is Tek screwed to the underside of the rail then glued and riveted into the top of the post.

Centre Post - 50x50 Square Glass Clamp for Stainless Rail

•Position: Centre •Use: Glass Balustrade •Material: 50x50 Satin Finish Stainless Steel •Height: 970mm •Grade: 316 Marine Grade Stainless •Base: 4 Hole Square Flange •Top: Square Perpendicular Joiner •Glass: Install with 850mm Glass Panels •Handrail: 50x50 Stainless Steel Top Rail

890 x 1200 x 8mm Glass Pool Fence Gate Panel

Glass Gate Panel.

• Width: 890mm
• Height: 1200mm
• Thickness: 8mm
• Weight: 21kg
• Hinge Holes: 4 x 10mm Holes to fix hinges
• Latch Holes: 2 x 10mm Holes to fix latch

Used for:

• Glass Pool Fencing

It can be installed with a Top Mounted Rail

Glass is certified to Australian Standards

329(w)x2050(h)x10mm Glass Shower Screen Hinge Panel

• Width: 329mm
• Height: 2050mm
• Thickness: 10mm
• Weight: 17kg
• Allow a 3mm Gap between the wall and glass and a 5mm Gap between this panel and the door.

When installed using Wall Brackets:

• When installed with a 600mm door in a corner configuration using a return panel the overall width will be 950mm
• When installed with a 600mm door between two wall the overall width will be 940mm

When installed using U Channel:

• When installed with a 600mm door in a corner configuration using a return panel the overall width will be 958mm
• When installed with a 600mm door between two wall the overall width will be 948mm

135 Degree Glass to Glass Chrome Shower Screen Door Hinge

2 required per door

• 135 Degree Glass to Glass Hinge
• Chrome Plate Finish
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards
• Made from solid brass

Custom Mitre cut glass required for Hinge Panel

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

Offset Wall to Glass Matt Black Shower Screen Door Hinge

2 required per door

• Offset Wall to Glass Hinge
• Matt Black Finish
• 3 x Fixing Holes
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards
• Made from solid brass
• Fixing Screws included
• Allen Key & Gaskets included

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

Square Offset Fixed Bracket - Suits round and Flat Rails

• 50mm Square Cap
• Suits round and Flat Rails
• Includes 3 Saddles 38mm, 50mm and Flat. You can simply change the saddle to use with different profile handrails.
• Requires a 20mm Diameter Hole in the Glass

2900mm length of Glazing Rubber

2900mm length of black glazing rubber. This can be used with 25x21mm rectangle or 25mm round slotted stainless rail.

610(w)x2041(h)x10mm Glass Shower Screen Knob Open Door Panel

For use with a Single Door Knob.

• Width: 610mm
• Height: 2041mm
• Thickness: 10mm
• Weight: 33kg
• Can be swung off the wall or a hinge panel

Requires 1 x Door Knob and 2 x Hinges.

397(w)x2050(h)x10mm Glass Shower Screen Return/Fixed Panel

This panel can be used as a return panel when installing a corner shower or a fixed panel when installing a single panel screen.

• Width: 397mm
• Height: 2050mm
• Thickness: 10mm
• Weight: 20kg
• Allow a 3mm Gap between the wall and glass and a 3mm Gap between this panel and the door.

Installation Widths:

• 400mm when installing with a wall bracket
• 407-410mm when installing with 19mm U Channel
• 407-422mm when installing with 35mm U Channel

600x1280 x 15mm Glass With 4 x Bottom Holes for Standoffs

• Width: 600mm
• Height: 1280mm
• Thickness: 15mm
• 4 x 22mm holes for Standoffs

Suitable for installation with:

• Glass Standoffs
• Top Mount Rail

Sliding Shower Screen Rail

White 38mm Diameter x 25mm Body Standoff for Face Mount Glass Balustrade / Pool Fence

• White
• 38mm Diameter
• 25mm High Body
• Requires a 20mm Diameter hole in the glass
• Install using M12 Threaded Rod into masonry
• Install using  M12 Metric to Lag Screw into timber
• Kit includes: Cap, Body, 2 x Plastic Washers and 1 x Bush
• For Face Mount Glass Balustrade / Pool Fence

M12 Fixing sold separately

Square Core Hole Stainless Spigot for Glass Balustrade or Glass Pool Fence

Square Core Hole Spigot

• Friction Fit - No holes in Glass Required
• Use for Glass Balustrade or Glass Pool Fence
• 2205 Grade Stainless Steel
• Suits 12mm Thick Glass
• 45mm Front profile
• Extension available for extra height or anchoring
• Use for Glass Balustrading or Pool Fencing applications
• Load test certificates available if required.
• Available in Mirror or Satin Finish

Click Here to view our Core Hole Installation Guide

25x21mm In-Line Joiner for Glass Balustrade / Pool Fence Top Rail

• Joins 2 straight lengths of 25x21mm Slotted Stainless Steel Tube
• Use for Glass Balustrade or Glass Pool Fence Top Rail
• 316 grade Stainless Steel
• Fit by Welding or epoxy glue
• Available in Mirror or satin finish

38mm Slotted 90 Degree Joiner for Glass Balustrade / Pool Fence Top Rail

• Joins 38mm Slotted Tube at a 90 degree angle (on a corner)
• Use for Glass Balustrade or Glass Pool Fence Top Rail
• 316 grade Stainless Steel
• Fit by Welding or epoxy glue
• Available in Mirror or satin finish

Round Core Hole Stainless Spigot for Glass Balustrade or Glass Pool Fence

Round Core Hole Spigot

• Friction Fit - No holes in glass required
• 2205 Grade Stainless Steel
• 50mm Diameter
• Extension available for extra height or anchoring
• Suitable for Glass Balustrade or Pool Fence applications
• Load test certificates available if required.
• Available in Mirror or Satin Finish

Click Here to view our Core Hole Installation Guide

38mm 90 Degree Joiner for Glass Balustrade Offset Rail

• Joins 2 lengths of 38mm Tube at a 90 degree angle
• 316 grade Stainless Steel
• Fit by Welding or epoxy glue
• Available in Mirror or satin finish

38mm Diameter x 45mm Body Standoff for Face Mount Glass Balustrade / Pool Fence

• 38mm Diameter
• 45mm High Body
• Requires a 20mm Diameter hole in the glass
• Install using M12 Threaded Rod into masonry
• Install using M12 Metric to Lag Screw into timber
• Kit includes: Cap, Body, 2 x Plastic Washers and 1 x Bush
• For Face Mount Glass Balustrade / Pool Fence

M12 Fixing sold separately

700x1280 x 15mm Glass With 4 x Bottom Holes for Standoffs

• Width: 700mm
• Height: 1280mm
• Thickness: 15mm
• 4 x 22mm holes for Standoffs

Suitable for installation with:

• Glass Standoffs
• Top Mount Rail

Corner Post - 2 Inch Round Glass Clamp Post for Stainless Rail

2" Round Glass Clamp Corner Post for Stainless Top Rail •Position: Corner •Use: Glass Balustrade •Material: 2" Mirror Finish Tube •Height: 970mm •Grade: 316 Marine Grade Stainless •Base: 3 Hole Round Flange •Top: 90 Degree Tee Flush Joiner •Glass: Install with 850mm Glass Panels •Handrail: Install with 2 Inch Round Stainless Top Rail

379(w)x2050(h)x10mm Glass Shower Screen Hinge Panel

• Width: 379mm
• Height: 2050mm
• Thickness: 10mm
• Weight: 19kg
• Allow a 3mm Gap between the wall and glass and a 5mm Gap between this panel and the door.

When installed using Wall Brackets:

• When installed with a 600mm door in a corner configuration using a return panel the overall width will be 1000mm
• When installed with a 600mm door between two wall the overall width will be 990mm

When installed using U Channel:

• When installed with a 600mm door in a corner configuration using a return panel the overall width will be 1008mm
• When installed with a 600mm door between two wall the overall width will be 998mm

Wall to Glass Chrome Shower Screen Door Hinge

2 required per door

• Wall to Glass Hinge
• Chrome Plated Finish
• 4 x Fixing Holes
• Allow 9mm gap between Wall and Glass
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards
• Made from solid brass
• Fixing Screws included
• Allen Key & Gaskets included

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

Wall to Glass Matt Black Shower Screen Door Hinge

2 required per door

• Wall to Glass Hinge
• Matt Black Finish
• 4 x Fixing Holes
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards
• Made from solid brass
• Fixing Screws included
• Allen Key & Gaskets included

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

38mm Diameter Round Offset Bracket - Adjustable Height - Fixed Saddle

• 38mm Diameter Round Cap
• Suits round or flat rails
• Adjustable Height
• Fixed Saddle
• Includes 3 Saddles 38mm, 50mm and Flat. You can simply change the saddle to use with different profile handrails.
• Requires a 20mm Hole in the Glass

620(w)x2041(h)x10mm Glass Shower Screen Knob Open Door Panel

For use with a Single Door Knob.

• Width: 620mm
• Height: 2041mm
• Thickness: 10mm
• Weight: 35kg
• Can be swung off the wall or a hinge panel

Requires 1 x Door Knob and 2 x Hinges.

497(w)x2050(h)x10mm Glass Shower Screen Return/Fixed Panel

This panel can be used as a return panel when installing a corner shower or a fixed panel when installing a single panel screen.

• Width: 497mm
• Height: 2050mm
• Thickness: 10mm
• Weight: 25kg
• Allow a 3mm Gap between the wall and glass and a 3mm Gap between this panel and the door.

Installation Widths:

• 500mm when installing with a wall bracket
• 507-510mm when installing with 19mm U Channel
• 507-522mm when installing with 35mm U Channel

1000 x 1200 x 8mm Glass Pool Fence Gate Panel

Glass Gate Panel.

• Width: 1000mm
• Height: 1200mm
• Thickness: 8mm
• Weight: 23kg
• Hinge Holes: 4 x 10mm Holes to fix hinges
• Latch Holes: 2 x 10mm Holes to fix latch

Used for:

• Glass Pool Fencing

It can be installed with a Top Mounted Rail

Glass is certified to Australian Standards

Sliding Shower Door Bump Stopper

• 2130mm Long
• Suits 10mm Glass
• 10mm Bulb
• Prevents Sliding Glass Door contact between glass and wall.

25x21mm 90 Degree Joiner for Glass Balustrade / Pool Fence Top Rail

• Joins 25x21mm Slotted Tube at a 90 degree angle (on a corner)
• 316 grade Stainless Steel
• Fit by Welding or epoxy glue
• Available in Mirror or satin finish

38mm Slotted 90 Degree Radius Joiner for Glass Balustrade / Pool Fence Top Rail

• Joins 38mm Slotted Tube at a 90 degree angle (on a corner)
• Use for Glass Balustrade or Glass Pool Fence Top Rail
• 316 grade Stainless Steel
• Fit by Welding or epoxy glue
• Available in Mirror or satin finish

Flat Dress Ring for Round Core Hole Spigot

Neatly fits over core hole spigot to hide grout

38mm 90 Degree Radius Joiner for Glass Balustrade Offset Rail

• Joins 2 lengths of 38mm Tube at a 90 degree angle
• 316 grade Stainless Steel
• Fit by Welding or epoxy glue
• Available in Mirror or satin finish

750x1280 x 15mm Glass With 4 x Bottom Holes for Standoffs

• Width: 750mm
• Height: 1280mm
• Thickness: 15mm
• 4 x 22mm holes for Standoffs

Suitable for installation with:

• Glass Standoffs
• Top Mount Rail

429(w)x2050(h)x10mm Glass Shower Screen Hinge Panel

• Width: 429mm
• Height: 2050mm
• Thickness: 10mm
• Weight: 22kg
• Allow a 3mm Gap between the wall and glass and a 5mm Gap between this panel and the door.

When installed using Wall Brackets:

• When installed with a 600mm door in a corner configuration using a return panel the overall width will be 1050mm
• When installed with a 600mm door between two wall the overall width will be 1040mm

When installed using U Channel:

• When installed with a 600mm door in a corner configuration using a return panel the overall width will be 1058mm
• When installed with a 600mm door between two wall the overall width will be 1048mm

Offset Wall to Glass Chrome Shower Screen Door Hinge

2 required per door

• Offset Wall to Glass Hinge
• 3 x Fixing Holes
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards
• Made from solid brass
• Fixing Screws included
• Allen Key & Gaskets included

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

Wall Bracket - Matt Black - For Glass Shower Screen

Used to fix Hinge and Return/Fixed panels to the wall.

3 Per Panel recommended

• Wall Bracket
• 3mm Gap between glass and wall
• Matt Black Finish
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• 2 x Compression/Friction screws
• No holes in glass required
• Made from solid brass
• 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

50mm Diameter Round Offset Bracket - Adjustable Height - Fixed Saddle

• 50mm Diameter Round Cap
• Suits Round and Flat Rails
• Adjustable Height
• Fixed Saddle
• Includes 3 Saddles 38mm, 50mm and Flat. You can simply change the saddle to use with different profile handrails.
• Requires a 20mm Diameter Hole in the Glass

D Front, Flat Back Glass Clamp for Glass Balustrade / Pool Fence

D Front, Flat Back Glass Clamp

• Flat back for installation onto timber or steel post or brick wall
• Use for Glass Balustrade / Glass Pool Fence
• Suitable for 8, 10 and 12mm Glass - Gaskets provided
• 316 Marine Grade Stainless Steel
• Available in Mirror or Satin finish

Black 38mm Diameter x 45mm Body Standoff for Face Mount Glass Balustrade / Pool Fence

• Black
• 8mm Diameter
• 45mm High Body
• Requires a 20mm Diameter hole in the glass
• Install using M12 Threaded Rod into masonry
• Install using M12 Metric to Lag Screw into timber
• Kit includes: Cap, Body, 2 x Plastic Washers and 1 x Bush
• For Face Mount Glass Balustrade / Pool Fence

M12 Fixing sold separately

630(w)x2041(h)x10mm Glass Shower Screen Knob Open Door Panel

For use with a Single Door Knob.

• Width: 630mm
• Height: 2041mm
• Thickness: 10mm
• Weight: 37kg
• Can be swung off the wall or a hinge panel

Requires 1 x Door Knob and 2 x Hinges.

597(w)x2050(h)x10mm Glass Shower Screen Return/Fixed Panel

This panel can be used as a return panel when installing a corner shower or a fixed panel when installing a single panel screen.

• Width: 597mm
• Height: 2050mm
• Thickness: 10mm
• Weight: 30kg
• Allow a 3mm Gap between the wall and glass and a 3mm Gap between this panel and the door.

Installation Widths:

• 600mm when installing with a wall bracket
• 607-610mm when installing with 19mm U Channel
• 607-622mm when installing with 35mm U Channel

600 x 1200 x 12mm Glass Pool Fence Hinge Panel

Glass Gate Hinge Panel. Used to swing a glass gate off.

• Width: 600mm
• Height: 1200mm
• Thickness: 12mm
• Weight: 22kg
• Holes: 4 x 14mm Holes to fix glass gate hinges

Suitable for installation with:

• Friction Spigots
• Deck Mount Channel

Used for:

• Glass Pool Fencing

It can be installed with a Top Mounted Rail

Glass is certified to Australian Standards

Note: This panel will need to be secured to a post or another glass panel using Glass Braces or Glass Clamps. It will not hole a gate if only supported by Spigots.

Sliding Shower Door Water Seal

• 2130mm Long
• Suits 10mm Glass
• 26mm Soft Flexible PVC Fin
• Reduces water escape between door and fixed panel

1200 x 8mm Spring Gate Panel

Priced from $59. Select the width for pricing!!

Economy Spring Hinge Glass Pool Fence Gate Panel

• 4 Widths available (750mm, 834mm, 890mm and 1000mm)
• Height: 1200mm
• Thickness: 8mm
• Hinge Holes: 4 x 10mm Holes to fix hinges
• Latch Holes: 2 x 10mm Holes to fix latch

Install with Spring Hinges or Polaris 155 Series Soft Close Hinges

Square Cover for Square Core Hole Spigot

Neatly fits over our Square Core Hole Spigot to cover grout

25x21mm Adjustable Horizontal Joiner for Glass Balustrade / Pool Fence Top Rail

• Joins 25x21mm Slotted Tube at a Corner that is not 90 degrees
• Use for Glass Balustrade or Glass Pool Fence Top Rail
• 316 grade Stainless Steel
• Fit by Welding or epoxy glue
• Available in Mirror or satin finish

38mm Slotted End Cap for Glass Balustrade / Pool Fence Top Rail

• 38mm End Cap
• Use for Glass Balustrade or Glass Pool Fence Top Rail
• 316 grade Stainless Steel
• Fit by Welding or epoxy glue
• Available in Mirror or satin finish

38mm Adjustable Joiner for Glass Balustrade Offset Rail

• Joins 2 lengths of 38mm Tube at non 90 degree corner
• 316 grade Stainless Steel
• Fit by Welding or epoxy glue
• Available in Mirror or satin finish

800x1280 x 15mm Glass With 6 x Bottom Holes for Standoffs

• Width: 800mm
• Height: 1280mm
• Thickness: 15mm
• 6 x 22mm holes for Standoffs

Suitable for installation with:

• Glass Standoffs
• Top Mount Rail

10mm x 100mm Counter Sunk Screws x 4 pack

• 316 Grade Stainless
• Hex Head Drive
• Self Tapping
• 100mm long
• 18mm Outer Diameter Head
• Ideal for use with Square and Round Base Plate Spigots into timber
• 1 pack required per spigot

Glass to Round Post Deluxe Gate Pool Fence Latch

• Glass to Round Post Deluxe Latch
• Use for Glass Pool Fence Gate or Glass Balustrade Gate
• Backing Plates are 316 Stainless Steel
• Latch is 316 Stainless Steel
• Requires Gate to be drilled (2 x 12mm Holes, 20mm in from edge and 42mm apart)
• Suits 8, 10 and 12mm gates
• For best results leave a 9mm gap between the gate and Post/Wall

479(w)x2050(h)x10mm Glass Shower Screen Hinge Panel

• Width: 479mm
• Height: 2050mm
• Thickness: 10mm
• Weight: 24kg
• Allow a 3mm Gap between the wall and glass and a 5mm Gap between this panel and the door.

When installed using Wall Brackets:

• When installed with a 600mm door in a corner configuration using a return panel the overall width will be 1100mm
• When installed with a 600mm door between two wall the overall width will be 1090mm

When installed using U Channel:

• When installed with a 600mm door in a corner configuration using a return panel the overall width will be 1108mm
• When installed with a 600mm door between two wall the overall width will be 1098mm

Wall Bracket - Chrome Plated - For Shower Screen

Used to fix Hinge and Return/Fixed panels to the wall.

3 Per Panel recommended

• Wall Bracket
• 3mm Gap between glass and wall
• Chrome Plated Finish
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• 2 x Compression/Friction screws
• No holes in glass required
• Made from solid brass
• 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

Offset Wall Bracket - Matt Black - For Glass Shower Screen

Used to fix Hinge and Return/Fixed panels to the wall.

3 Per Panel recommended

These are easier to install then the hidden screw wall bracket. The screw can be marked and installed with the glass standing in place.

• Wall Bracket
• Matt Black Finish
• 3mm Gap between glass and wall
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• 2 x Compression/Friction screws
• No holes in glass required
• Made from solid brass
• 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used.

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

38mm Diameter Round Offset Bracket - Adjustable Height - Adjustable Saddle

• 38mm Diameter Round Cap
• Suits round and flat rails
• Adjustable Height
• Adjustable Saddle
• Includes 3 Saddles 38mm, 50mm and Flat. You can simply change the saddle to use with different profile handrails.
• Requires a 20mm Diameter Hole in the Glass

640(w)x2041(h)x10mm Glass Shower Screen Knob Open Door Panel

For use with a Single Door Knob.

• Width: 640mm
• Height: 2041mm
• Thickness: 10mm
• Weight: 39kg
• Can be swung off the wall or a hinge panel

Requires 1 x Door Knob and 2 x Hinges.

697(w)x2050(h)x10mm Glass Shower Screen Return/Fixed Panel

This panel can be used as a return panel when installing a corner shower or a fixed panel when installing a single panel screen.

• Width: 697mm
• Height: 2050mm
• Thickness: 10mm
• Weight: 36kg
• Allow a 3mm Gap between the wall and glass and a 3mm Gap between this panel and the door.

Installation Widths:

• 700mm when installing with a wall bracket
• 707-710mm when installing with 19mm U Channel
• 707-722mm when installing with 35mm U Channel

800 x 1200 x 12mm Glass Pool Fence Hinge Panel

Glass Gate Hinge Panel. Used to swing a glass gate off.

• Width: 800mm
• Height: 1200mm
• Thickness: 12mm
• Weight: 29kg
• Holes: 4 x 14mm Holes to fix glass gate hinges

Suitable for installation with:

• Friction Spigots
• Deck Mount Channel

Used for:

• Glass Pool Fencing

It can be installed with a Top Mounted Rail

Glass is certified to Australian Standards

Note: This panel will need to be secured to a post or another glass panel using Glass Braces or Glass Clamps. It will not hole a gate if only supported by Spigots.

Slimline Rail Wall Bracket

Only required if using a 650mm modular Fixed Glass Panel

White 38mm Diameter x 45mm Body Standoff for Face Mount Glass Balustrade / Pool Fence

• White
• 8mm Diameter
• 45mm High Body
• Requires a 20mm Diameter hole in the glass
• Install using M12 Threaded Rod into masonry
• Install using M12 Metric to Lag Screw into timber
• Kit includes: Cap, Body, 2 x Plastic Washers and 1 x Bush
• For Face Mount Glass Balustrade / Pool Fence

M12 Fixing sold separately

25x21mm Adjustable Vertical Joiner for Glass Balustrade / Pool Fence Top Rail

• Joins 25x21mm Slotted Tube at a change of Vertical Joiner (eg. Down Stairs)
• Use for Glass Balustrade or Glass Pool Fence Top Rail
• 316 grade Stainless Steel
• Fit by Welding or epoxy glue
• Available in Mirror or satin finish