sales@diyglass.com.auCALL: 0414 266 624

Shower Screen Brace Panels

A glass brace panel is used to tie the hinge panel and return panel together. It sits above the door across the top front of the shower screen. A Wall Bracket can be used to connect the glass brace to the wall and Glass Brace Brackets join the brace panel to the hinge and return panels.

DIY glass can also supply custom sized and shaped panels. Please email This email address is being protected from spambots. You need JavaScript enabled to view it. with a drawing indicating your size and shape as well as any additional requirements such as holes or cut outs. Please also supply your delivery suburb or post code in the email.

846x150x 8mm - Glass Brace - Clear Toughened Glass

Glass Brace panel used to Connect the hinge panel to a return panel about the door. •Width: 846mm •Depth: 150mm •Thickness: 8mm •Weight: 2.5kg •Use With Hinge Panel: 229mm Requires 2 x Glass Brace Brackets and 1 x Wall Bracket for Installation.

$ 16.20

857x150x 8mm - Glass Brace - Clear Toughened Glass

Glass Brace panel used to Connect the hinge panel to a return panel about the door. •Width: 857mm •Depth: 150mm •Thickness: 8mm •Weight: 2.6kg •Use With Hinge Panel: 240mm Requires 2 x Glass Brace Brackets and 1 x Wall Bracket for Installation.

$ 17.70

896x150x 8mm - Glass Brace - Clear Toughened Glass

Glass Brace panel used to Connect the hinge panel to a return panel about the door. •Width: 896mm •Depth: 150mm •Thickness: 8mm •Weight: 2.7kg •Use With Hinge Panel: 279mm Requires 2 x Glass Brace Brackets and 1 x Wall Bracket for Installation.

$ 19.25

946x150x 8mm - Glass Brace - Clear Toughened Glass

Glass Brace panel used to Connect the hinge panel to a return panel about the door. •Width: 946mm •Depth: 150mm •Thickness: 8mm •Weight: 2.8kg •Use With Hinge Panel: 329mm Requires 2 x Glass Brace Brackets and 1 x Wall Bracket for Installation.

$ 20.80

996x150x 8mm - Glass Brace - Clear Toughened Glass

Glass Brace panel used to Connect the hinge panel to a return panel about the door. •Width: 996mm •Depth: 150mm •Thickness: 8mm •Weight: 3.0kg •Use With Hinge Panel: 379mm Requires 2 x Glass Brace Brackets and 1 x Wall Bracket for Installation.

$ 22.35

1046x150x 8mm - Glass Brace - Clear Toughened Glass

Glass Brace panel used to Connect the hinge panel to a return panel about the door. •Width: 1046mm •Depth: 150mm •Thickness: 8mm •Weight: 3.1kg •Use With Hinge Panel: 429mm Requires 2 x Glass Brace Brackets and 1 x Wall Bracket for Installation.

$ 23.90

1096x150x 8mm - Glass Brace - Clear Toughened Glass

Glass Brace panel used to Connect the hinge panel to a return panel about the door. •Width: 1096mm •Depth: 150mm •Thickness: 8mm •Weight: 3.3kg •Use With Hinge Panel: 479mm Requires 2 x Glass Brace Brackets and 1 x Wall Bracket for Installation.

$ 25.40

1146x150x 8mm - Glass Brace - Clear Toughened Glass

Glass Brace panel used to Connect the hinge panel to a return panel about the door. •Width: 1146mm •Depth: 150mm •Thickness: 8mm •Weight: 3.4kg •Use With Hinge Panel: 529mm Requires 2 x Glass Brace Brackets and 1 x Wall Bracket for Installation.

$ 26.95

1157x150x 8mm - Glass Brace - Clear Toughened Glass

Glass Brace panel used to Connect the hinge panel to a return panel about the door. •Width: 1157mm •Depth: 150mm •Thickness: 8mm •Weight: 3.6kg •Use With Hinge Panel: 540mm Requires 2 x Glass Brace Brackets and 1 x Wall Bracket for Installation.

$ 28.50

1196x150x 8mm - Glass Brace - Clear Toughened Glass

Glass Brace panel used to Connect the hinge panel to a return panel about the door.

  • Width: 1196mm
  • Depth: 150mm
  • Thickness: 8mm
  • Weight:  3.6kg
  • Use With Hinge Panel: 579mm
Requires 2 x Glass Brace Brackets (Chrome Plated or Matt Black Finish) and 1 x Wall Bracket (Chrome Plated or Matt Black Finish) for Installation.

$ 30.00

Wall Bracket - Chrome Plated - For Shower Screen

Used to fix Hinge and Return/Fixed panels to the wall.

3 Per Panel recommended

  • Wall Bracket
  • 3mm Gap between glass and wall
  • Chrome Plated Finish
  • Square Finish Edges
  • Suitable for 8mm & 10mm Glass
  • 2 x Compression/Friction screws
  • No holes in glass required
  • Made from solid brass
  • 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

$ 8.00

Offset Wall Bracket - Chrome Plated - For Shower Screen

Used to fix Hinge and Return/Fixed panels to the wall in a shower screen.

3 Per Panel recommended

These are easier to install then the hidden screw wall bracket. The screw can be marked and installed with the glass standing in place.

  • Offset Wall Bracket for Shower Screens
  • Chrome Finish
  • 3mm Gap between glass and wall
  • Square Finish Edges
  • Suitable for 8mm & 10mm Glass
  • 2 x Compression/Friction screws
  • No holes in glass required
  • Made from solid brass
  • 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used.

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

$ 13.10

Small Glass Brace Bracket - Chrome Plated - For Shower Screen

Used to stiffen and brace a return or hinge panel by fixing a brace panel along the top and tying them together.

Can also be used to tie a Fixed panel back to the wall.

  • Small Glass Brace Bracket
  • Square Finish Edges
  • Brace 8mm thick glass hood to 10mm thick return & hinge panels
  • 2 x compression/friction screws
  • Slimline Design
  • No holes required in glass
  • Made from solid brass

Tip: Place bracket ensuring glass door does not hit when swinging inwards.

$ 24.00

Large Glass Brace Bracket - Chrome Plated - For Shower Screen

Used to stiffen and brace a return or hinge panel by fixing a brace panel along the top and tying them together.

Can also be used to tie a Fixed panel back to the wall.

  • Small Glass Brace Bracket
  • Square Finish Edges
  • Brace 8mm thick glass hood to 10mm thick return & hinge panels
  • 4 x compression/friction screws
  • Sturdy design
  • No holes required in glass
  • Made from solid brass

Tip: Place bracket ensuring glass door does not hit when swinging inwards.

$ 29.55

Wall Bracket - Matt Black - For Glass Shower Screen

Wall Bracket - Matt Black -  For Shower Screen

Used to fix Hinge and Return/Fixed panels to the wall.

3 Per Panel recommended

  • Wall Bracket
  • 3mm Gap between glass and wall
  • Matt Black Finish
  • Square Finish Edges
  • Suitable for 8mm & 10mm Glass
  • 2 x Compression/Friction screws
  • No holes in glass required
  • Made from solid brass
  • 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

$ 10.65

Offset Wall Bracket - Matt Black - For Glass Shower Screen

Used to fix Hinge and Return/Fixed panels to the wall.

3 Per Panel recommended

These are easier to install then the hidden screw wall bracket. The screw can be marked and installed with the glass standing in place.

  • Wall Bracket
  • Matt Black Finish
  • 3mm Gap between glass and wall
  • Square Finish Edges
  • Suitable for 8mm & 10mm Glass
  • 2 x Compression/Friction screws
  • No holes in glass required
  • Made from solid brass
  • 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used.

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

$ 16.20

Large Glass Brace Bracket - Matt Black - For Glass Shower Screen

Used to stiffen and brace a return or hinge panel by fixing a brace panel along the top and tying them together.

Can also be used to tie a Fixed panel back to the wall.

  • Small Glass Brace Bracket
  • Matt Black Finish
  • Square Finish Edges
  • Brace 8mm thick glass hood to 10mm thick return & hinge panels
  • 4 x compression/friction screws
  • Sturdy design
  • No holes required in glass
  • Made from solid brass

Tip: Place bracket ensuring glass door does not hit when swinging inwards.

$ 34.80

Small Glass Brace Bracket - Matt Black - For Glass Shower Screen

Used to stiffen and brace a return or hinge panel by fixing a brace panel along the top and tying them together.

Can also be used to tie a Fixed panel back to the wall.

  • Small Glass Brace Bracket
  • Matt Black Finish
  • Square Finish Edges
  • Brace 8mm thick glass hood to 10mm thick return & hinge panels
  • 2 x compression/friction screws
  • Slimline Design
  • No holes required in glass
  • Made from solid brass

Tip: Place bracket ensuring glass door does not hit when swinging inwards.

$ 27.55

Custom Glass

Glass Supplied to almost any size and shape. Glass is cut from a 5500x2800mm panel. Glass supplied in thicknesses from 4mm to 19mm thick. Please email your requirements to sales@diyglass.com.au including and drawing of your required panel and your postcode for delivery.

Large Glass Brace Bracket - Brushed Brass / Gold - For Shower Screen

Used to stiffen and brace a return or hinge panel by fixing a brace panel along the top and tying them together.

Can also be used to tie a Fixed panel back to the wall.

  • Small Glass Brace Bracket
  • Square Finish Edges
  • Brace 8mm thick glass hood to 10mm thick return & hinge panels
  • 4 x compression/friction screws
  • Sturdy design
  • No holes required in glass

Tip: Place bracket ensuring glass door does not hit when swinging inwards.

$ 33.00

Small Glass Brace Bracket - Brushed Brass / Gold - For Shower Screen

Used to stiffen and brace a return or hinge panel by fixing a brace panel along the top and tying them together.

Can also be used to tie a Fixed panel back to the wall.

  • Small Glass Brace Bracket
  • Square Finish Edges
  • Brace 8mm thick glass hood to 10mm thick return & hinge panels
  • 2 x compression/friction screws
  • Slimline Design
  • No holes required in glass

Tip: Place bracket ensuring glass door does not hit when swinging inwards.

$ 23.00

Matt White Small Glass Brace Bracket

Used to stiffen and brace a return or hinge panel by fixing a brace panel along the top and tying them together.

Can also be used to tie a Fixed panel back to the wall.

  • Small Glass Brace Bracket
  • Square Finish Edges
  • Brace 8mm thick glass hood to 10mm thick return & hinge panels
  • 2 x compression/friction screws
  • Slimline Design
  • No holes required in glass

Tip: Place bracket ensuring glass door does not hit when swinging inwards.

$ 23.00

Matt White Large Glass Brace Bracket

Used to stiffen and brace a return or hinge panel by fixing a brace panel along the top and tying them together.

Can also be used to tie a Fixed panel back to the wall.

  • Small Glass Brace Bracket
  • Square Finish Edges
  • Brace 8mm thick glass hood to 10mm thick return & hinge panels
  • 4 x compression/friction screws
  • Sturdy design
  • No holes required in glass

Tip: Place bracket ensuring glass door does not hit when swinging inwards.

$ 33.00

Gunmetal Grey Large Glass Brace Bracket

Used to stiffen and brace a return or hinge panel by fixing a brace panel along the top and tying them together.

Can also be used to tie a Fixed panel back to the wall.

  • Small Glass Brace Bracket
  • Square Finish Edges
  • Brace 8mm thick glass hood to 10mm thick return & hinge panels
  • 4 x compression/friction screws
  • Sturdy design
  • No holes required in glass

Tip: Place bracket ensuring glass door does not hit when swinging inwards.

$ 33.00

Gunmetal Grey Small Glass Brace Bracket

Used to stiffen and brace a return or hinge panel by fixing a brace panel along the top and tying them together.

Can also be used to tie a Fixed panel back to the wall.

  • Small Glass Brace Bracket
  • Square Finish Edges
  • Brace 8mm thick glass hood to 10mm thick return & hinge panels
  • 2 x compression/friction screws
  • Slimline Design
  • No holes required in glass

Tip: Place bracket ensuring glass door does not hit when swinging inwards.

$ 23.00

Brushed Nickel Large Glass Brace Bracket

Used to stiffen and brace a return or hinge panel by fixing a brace panel along the top and tying them together.

Can also be used to tie a Fixed panel back to the wall.

  • Small Glass Brace Bracket
  • Square Finish Edges
  • Brace 8mm thick glass hood to 10mm thick return & hinge panels
  • 4 x compression/friction screws
  • Sturdy design
  • No holes required in glass

Tip: Place bracket ensuring glass door does not hit when swinging inwards.

$ 33.00

Brushed Nickel Small Glass Brace Bracket

Used to stiffen and brace a return or hinge panel by fixing a brace panel along the top and tying them together.

Can also be used to tie a Fixed panel back to the wall.

  • Small Glass Brace Bracket
  • Square Finish Edges
  • Brace 8mm thick glass hood to 10mm thick return & hinge panels
  • 2 x compression/friction screws
  • Slimline Design
  • No holes required in glass

Tip: Place bracket ensuring glass door does not hit when swinging inwards.

$ 23.00

Round Wall Bracket - Chrome Plated - For Shower Screen

Used to fix Hinge and Return/Fixed panels to the wall.

3 Per Panel recommended

  • Round Wall Bracket
  • 2.5mm Gap between glass and wall
  • Chrome Plated Finish
  • Slimline half round profile
  • Suitable for 8mm & 10mm Glass
  • 1 x Compression/Friction screws
  • No holes in glass required
  • Made from solid brass
  • 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

$ 8.00