500mm EnduroShield Glass Coat
Shower Screen Fixed Panel
Installation Widths:
Installation Widths:
Installation Widths:
Shower Screen Fixed Panel
Stainless Steel Square Base Plate Spigot plus a thermoplastic non-conductive insulating sleve that fits over the top.
Cover Specifications
Select to colour match the spigot to the cover if you plan on removing the cover at a later date.
You will not need to earth your spigot if you use this product.
1200mm High Premium Soft Close Hinge Panel
Available in 11 sizes ranging from 600mm to 1800mm wide.
Suits Polaris 125 Series and Atlantic Soft Close Hinges
1200mm 12mm Thick Premium Soft Close Gate Panels
Available in 800mm and 900mm wide.
There are two options available
You will need to order the matching hinges as the cutouts in the glass are different sizes on the 2 panels.
Use on glass balustrading or pool fencing.
2" Round Glass Clamp End Post for Stainless Top Rail •Position: End •Use: Glass Balustrade •Material: 2" Mirror Finish Tube •Height: 970mm •Grade: 316 Marine Grade Stainless •Base: 3 Hole Round Flange •Top: 90 Degree Flush Joiner •Glass: Install with 850mm Glass Panels •Handrail: Install with 2 Inch Round Stainless Top Rail
50x50 Square Glass Clamp End Post for Stainless Rail •Position: End •Use: Glass Balustrade •Material: 50x50 Satin Finish Stainless Steel •Height: 970mm •Grade: 316 Marine Grade Stainless •Base: 4 Hole Square Flange •Top: 90 Degree Flush Joiner •Glass: Install with 850mm Glass Panels •Handrail: Install with 50x50 Stainless Handrail
Glass Gate Panel.
Used for:
It can be installed with a Top Mounted Rail
Glass is certified to Australian Standards
When installed using Wall Brackets:
When installed using U Channel:
For use with a Door Handle.
Requires 1 x Door Handle and 2 x Hinges.
2 required per door
Maximum Door Weight when 2 hinges used is 35kg
Maximum Door Width when 2 hinges used is 800mm
•316 Grade Stainless Steel •M12 thread in the back •12mm Thick with Bevelled Cap Finish •1mm Thick Washer Included You will also need to order the correct installation rod •Installation into timber will require a Lag Screw to Metric Thread •Installation into Brick/concrete will require a Threaded Rod
Use on glass pool fencing.
This panel can be used as a return panel when installing a corner shower or a fixed panel when installing a single panel screen.
Installation Widths:
Suitable for installation with:
Economy Spring Hinge Glass Pool Fence Gate Panel
Install with Spring Hinges or Polaris 155 Series Soft Close Hinges
Neatly fits over our Square Base Plate Spigot to cover base plate screws
Glass Gate Panel.
Used for:
It can be installed with a Top Mounted Rail
Glass is certified to Australian Standards
When installed using Wall Brackets:
When installed using U Channel:
For use with a Single Door Knob.
Requires 1 x Door Knob and 2 x Hinges.
2 required per door
Custom Mitre cut glass required for Hinge Panel
Maximum Door Weight when 2 hinges used is 35kg
Maximum Door Width when 2 hinges used is 800mm
50x50 Square Glass Clamp End Post for Stainless Rail •Position: End - When over running top rail to connect to wall. •Use: Glass Balustrade •Material: 50x50 Satin Finish Stainless Steel •Height: 970mm •Grade: 316 Marine Grade Stainless •Base: 4 Hole Square Flange •Top: Perpendicular Joiner •Glass: Install with 850mm Glass Panels •Handrail: Install with 50x50 Stainless Handrail
2" Round Glass Clamp End Post for Stainless Top Rail •Position: End - Where the rail over runs the post and connects to wall/square post. •Use: Glass Balustrade •Material: 2" Mirror Finish Tube •Height: 970mm •Grade: 316 Marine Grade Stainless •Base: 3 Hole Round Flange •Top: Perpendicular Joiner •Glass: Install with 850mm Glass Panels •Handrail: Install with 2 Inch Round Stainless Top Rail
Use on glass pool fencing.
This panel can be used as a return panel when installing a corner shower or a fixed panel when installing a single panel screen.
Installation Widths:
Suitable for installation with:
Kit Includes:
Glass Gate Spring Hinge Panel. Used to swing a glass gate off.
Install with Ecomomy Glass Gate Panel and either glass to glass spring hinges or polaris 155 series hinges.
Glass is certified to Australian Standards
2" Round Glass Clamp Centre Post for Stainless Top Rail •Position: Centre •Use: Glass Balustrade •Material: 2" Mirror Finish Tube •Height: 970mm •Grade: 316 Marine Grade Stainless •Base: 4 Hole Square Flange •Top: Perpendicular Joiner •Glass: Install with 850mm Glass Panels •Handrail: Install with 2 Inch Round Stainless Top Rail The perpendicular joiner is Tek screwed to the underside of the rail then glued and riveted into the top of the post.
•Position: Centre •Use: Glass Balustrade •Material: 50x50 Satin Finish Stainless Steel •Height: 970mm •Grade: 316 Marine Grade Stainless •Base: 4 Hole Square Flange •Top: Square Perpendicular Joiner •Glass: Install with 850mm Glass Panels •Handrail: 50x50 Stainless Steel Top Rail
Glass Gate Panel.
Used for:
It can be installed with a Top Mounted Rail
Glass is certified to Australian Standards
When installed using Wall Brackets:
When installed using U Channel:
2 required per door
Maximum Door Weight when 2 hinges used is 35kg
Maximum Door Width when 2 hinges used is 800mm
For use with a Single Door Knob.
Requires 1 x Door Knob and 2 x Hinges.
This panel can be used as a return panel when installing a corner shower or a fixed panel when installing a single panel screen.
Installation Widths:
Suitable for installation with:
Click Here to view our Core Hole Installation Guide
Suitable for installation with:
2" Round Glass Clamp Corner Post for Stainless Top Rail •Position: Corner •Use: Glass Balustrade •Material: 2" Mirror Finish Tube •Height: 970mm •Grade: 316 Marine Grade Stainless •Base: 3 Hole Round Flange •Top: 90 Degree Tee Flush Joiner •Glass: Install with 850mm Glass Panels •Handrail: Install with 2 Inch Round Stainless Top Rail
When installed using Wall Brackets:
When installed using U Channel:
2 required per door
Maximum Door Weight when 2 hinges used is 35kg
Maximum Door Width when 2 hinges used is 800mm
2 required per door
Maximum Door Weight when 2 hinges used is 35kg
Maximum Door Width when 2 hinges used is 800mm
For use with a Single Door Knob.
Requires 1 x Door Knob and 2 x Hinges.
This panel can be used as a return panel when installing a corner shower or a fixed panel when installing a single panel screen.
Installation Widths:
Glass Gate Panel.
Used for:
It can be installed with a Top Mounted Rail
Glass is certified to Australian Standards
Suitable for installation with:
When installed using Wall Brackets:
When installed using U Channel:
Used to fix Hinge and Return/Fixed panels to the wall.
3 Per Panel recommended
Silicon must be used along glass edge when friction brackets used
Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.
For use with a Single Door Knob.
Requires 1 x Door Knob and 2 x Hinges.
This panel can be used as a return panel when installing a corner shower or a fixed panel when installing a single panel screen.
Installation Widths:
Glass Gate Hinge Panel. Used to swing a glass gate off.
Suitable for installation with:
Used for:
It can be installed with a Top Mounted Rail
Glass is certified to Australian Standards
Note: This panel will need to be secured to a post or another glass panel using Glass Braces or Glass Clamps. It will not hole a gate if only supported by Spigots.
Neatly fits over our Square Core Hole Spigot to cover grout
When installed using Wall Brackets:
When installed using U Channel:
2 required per door
Custom Mitre cut glass required for Hinge Panel
Maximum Door Weight when 2 hinges used is 35kg
Maximum Door Width when 2 hinges used is 800mm
Used to fix Hinge and Return/Fixed panels to the wall.
3 Per Panel recommended
These are easier to install then the hidden screw wall bracket. The screw can be marked and installed with the glass standing in place.
Silicon must be used along glass edge when friction brackets used.
Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.
For use with a Single Door Knob.
Requires 1 x Door Knob and 2 x Hinges.
This panel can be used as a return panel when installing a corner shower or a fixed panel when installing a single panel screen.
Installation Widths:
Glass Gate Hinge Panel. Used to swing a glass gate off.
Suitable for installation with:
Used for:
It can be installed with a Top Mounted Rail
Glass is certified to Australian Standards
Note: This panel will need to be secured to a post or another glass panel using Glass Braces or Glass Clamps. It will not hole a gate if only supported by Spigots.
Glass Gate Hinge Panel. Used to swing a glass gate off.
Suitable for installation with:
Used for:
It can be installed with a Top Mounted Rail
Glass is certified to Australian Standards
This panel can be used as a return panel when installing a corner shower or a fixed panel when installing a single panel screen.
Installation Widths:
When installed using Wall Brackets:
When installed using U Channel:
Used to stiffen and brace a return or hinge panel by fixing a brace panel along the top and tying them together.
Can also be used to tie a Fixed panel back to the wall.
Tip: Place bracket ensuring glass door does not hit when swinging inwards.
Bostik V60 Transparent Glazing Silicon
Premium Grade Neutral Cure Glazing Silicon Sealant
Suitable for:
2 required per door
Maximum Door Weight when 2 hinges used is 35kg
Maximum Door Width when 2 hinges used is 800mm
Required when installing a sliding shower door with a glass return panel.
Glass Gate Hinge Panel. Used to swing a glass gate off.
Suitable for installation with:
Used for:
It can be installed with a Top Mounted Rail
Glass is certified to Australian Standards
This panel can be used as a return panel when installing a corner shower or a fixed panel when installing a single panel screen.
Installation Widths:
When installed using Wall Brackets:
When installed using U Channel:
2 required per door
Maximum Door Weight when 2 hinges used is 35kg
Maximum Door Width when 2 hinges used is 800mm
Used to fix Hinge and Return/Fixed panels to the wall in a shower screen.
3 Per Panel recommended
These are easier to install then the hidden screw wall bracket. The screw can be marked and installed with the glass standing in place.
Silicon must be used along glass edge when friction brackets used.
Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.
Used to stiffen and brace a return or hinge panel by fixing a brace panel along the top and tying them together.
Can also be used to tie a Fixed panel back to the wall.
Tip: Place bracket ensuring glass door does not hit when swinging inwards.
Glass Gate Hinge Panel. Used to swing a glass gate off.
Suitable for installation with:
Used for:
It can be installed with a Top Mounted Rail
Glass is certified to Australian Standards
