Corner Post - Core Hole - 1660mm 2 Inch Round Slotted Tube for Glass Pool Fence

1660mm 2" Round Corner Slotted Tube Post for Glass Pool Fence •Position: Corner •Use: Glass Pool Fence •Material: 2" Mirror Finish 90 Degree Slotted Tube •Height: 1660mm •Grade: 316 Marine Grade Stainless •Base: Cut to required length for core hole installation •Top: End Cap •Glass: Install with 1200mm Glass Panels

Centre Post - Base Plate - 1260mm 50x50 Square Glass Clamp for Glass Pool Fence

•Position: Centre •Use: Glass Pool Fence •Material: 50x50 Satin Stainless Tube •Height: 1260mm •Grade: 316 Marine Grade Stainless •Base: 4 Hole Square Flange •Top: End Cap •Glass: Install with 1200mm Glass Panels

End Post - Base Plate - 1260mm 50x50 Square Glass Clamp for Glass Pool Fence

•Position: End •Use: Glass Pool Fence •Material: 50x50 Satin Stainless Tube •Height: 1260mm •Grade: 316 Marine Grade Stainless •Base: 4 Hole Square Flange •Top: End Cap •Glass: Install with 1200mm Glass Panels

Corner Post - Base Plate - 1260mm 50x50 Square Glass Clamp for Glass Pool Fence

•Position: Corner •Use: Glass Pool Fence •Material: 50x50 Satin Stainless Tube •Height: 1260mm •Grade: 316 Marine Grade Stainless •Base: 4 Hole Square Flange •Top: End Cap •Glass: Install with 1200mm Glass Panels

Centre Post - Core Hole - 1660mm 50x50 Square Glass Clamp for Glass Pool Fence

•Position: Centre •Use: Glass Pool Fence •Material: 50x50 Satin Stainless Tube •Height: 1660mm •Grade: 316 Marine Grade Stainless •Base: Cut to required length for core hole installation •Top: End Cap •Glass: Install with 1200mm Glass Panels

End Post - Core Hole - 1660mm 50x50 Square Glass Clamp for Glass Pool Fence

•Position: End •Use: Glass Pool Fence •Material: 50x50 Satin Stainless Tube •Height: 1660mm •Grade: 316 Marine Grade Stainless •Base: Cut to required length for core hole installation •Top: End Cap •Glass: Install with 1200mm Glass Panels

Corner Post - Core Hole - 1660mm 50x50 Square Glass Clamp for Glass Pool Fence

•Position: Corner •Use: Glass Pool Fence •Material: 50x50 Satin Stainless Tube •Height: 1660mm •Grade: 316 Marine Grade Stainless •Base: Cut to required length for core hole installation •Top: End Cap •Glass: Install with 1200mm Glass Panels

Glass to Glass - Straight - Small - Glass Brace for Stiffening Glass Pool Fences

Used as a rigidity brace on a glass pool fence or glass balustrade.

• Glass to Glass in a Straight Line
• Use for Stiffening Glass Pool Fences
• Suitable for 12mm Glass
• 75mm Long x 25mm Wide
• Minimum gap between glass panels is 20mm
• Maximum gap between glass panels is 50mm
• Friction fixed so not holes in glass required.
• Made from solid 316 Grade Stainless
• Available in Mirror or Satin finish

Glass to Glass - Straight - Large - Glass Brace for Stiffening Glass Pool Fences

Used as a rigidity brace on a glass pool fence or glass balustrade.

• Glass to Glass in a Straight Line
• Use for Stiffening Glass Pool Fences
• Suitable for 12mm Glass
• 140mm Long x 25mm Wide
• Minimum gap between glass panels is 20mm
• Maximum gap between glass panels is 95mm
• Friction fixed so not holes in glass required.
• Made from solid 316 Grade Stainless
• Available in Mirror or Satin finish

Glass to Wall - Glass Brace for Stiffening Glass Pool Fences

Used as a rigidity brace on a glass pool fence or glass balustrade.

• Glass to Wall/Post
• Use for Stiffening Glass Pool Fences
• Suitable for 12mm Glass
• Friction fixed so not holes in glass required.
• Made from solid 316 Grade Stainless
• Available in Mirror or Satin finish
• 2 screws required (sold separately)

Glass to Glass - 90 Degree Corner - Glass Brace for Stiffening Glass Pool Fences

Used as a rigidity brace on a glass pool fence or glass balustrade.

• Glass to Glass at a 90 Degree Corner
• Use for Stiffening Glass Pool Fences
• Suitable for 12mm Glass
• Friction fixed so not holes in glass required.
• Made from solid 316 Grade Stainless
• Available in Mirror or Satin finish

Glass to Glass - Swivel - Glass Brace for Stiffening Glass Pool Fences

Used as a rigidity brace on a glass pool fence or glass balustrade.

• Glass to Glass at an odd angle Corner
• Use for Stiffening Glass Pool Fences
• Suitable for 12mm Glass
• Friction fixed so not holes in glass required.
• Made from solid 316 Grade Stainless
• Available in Mirror or Satin finish

846x150x 8mm - Glass Brace - Clear Toughened Glass

Glass Brace panel used to Connect the hinge panel to a return panel about the door. •Width: 846mm •Depth: 150mm •Thickness: 8mm •Weight: 2.5kg •Use With Hinge Panel: 229mm Requires 2 x Glass Brace Brackets and 1 x Wall Bracket for Installation.

857x150x 8mm - Glass Brace - Clear Toughened Glass

Glass Brace panel used to Connect the hinge panel to a return panel about the door. •Width: 857mm •Depth: 150mm •Thickness: 8mm •Weight: 2.6kg •Use With Hinge Panel: 240mm Requires 2 x Glass Brace Brackets and 1 x Wall Bracket for Installation.

896x150x 8mm - Glass Brace - Clear Toughened Glass

Glass Brace panel used to Connect the hinge panel to a return panel about the door. •Width: 896mm •Depth: 150mm •Thickness: 8mm •Weight: 2.7kg •Use With Hinge Panel: 279mm Requires 2 x Glass Brace Brackets and 1 x Wall Bracket for Installation.

946x150x 8mm - Glass Brace - Clear Toughened Glass

Glass Brace panel used to Connect the hinge panel to a return panel about the door. •Width: 946mm •Depth: 150mm •Thickness: 8mm •Weight: 2.8kg •Use With Hinge Panel: 329mm Requires 2 x Glass Brace Brackets and 1 x Wall Bracket for Installation.

996x150x 8mm - Glass Brace - Clear Toughened Glass

Glass Brace panel used to Connect the hinge panel to a return panel about the door. •Width: 996mm •Depth: 150mm •Thickness: 8mm •Weight: 3.0kg •Use With Hinge Panel: 379mm Requires 2 x Glass Brace Brackets and 1 x Wall Bracket for Installation.

1046x150x 8mm - Glass Brace - Clear Toughened Glass

Glass Brace panel used to Connect the hinge panel to a return panel about the door. •Width: 1046mm •Depth: 150mm •Thickness: 8mm •Weight: 3.1kg •Use With Hinge Panel: 429mm Requires 2 x Glass Brace Brackets and 1 x Wall Bracket for Installation.

1096x150x 8mm - Glass Brace - Clear Toughened Glass

Glass Brace panel used to Connect the hinge panel to a return panel about the door. •Width: 1096mm •Depth: 150mm •Thickness: 8mm •Weight: 3.3kg •Use With Hinge Panel: 479mm Requires 2 x Glass Brace Brackets and 1 x Wall Bracket for Installation.

1146x150x 8mm - Glass Brace - Clear Toughened Glass

Glass Brace panel used to Connect the hinge panel to a return panel about the door. •Width: 1146mm •Depth: 150mm •Thickness: 8mm •Weight: 3.4kg •Use With Hinge Panel: 529mm Requires 2 x Glass Brace Brackets and 1 x Wall Bracket for Installation.

1157x150x 8mm - Glass Brace - Clear Toughened Glass

Glass Brace panel used to Connect the hinge panel to a return panel about the door. •Width: 1157mm •Depth: 150mm •Thickness: 8mm •Weight: 3.6kg •Use With Hinge Panel: 540mm Requires 2 x Glass Brace Brackets and 1 x Wall Bracket for Installation.

1196x150x 8mm - Glass Brace - Clear Toughened Glass

Glass Brace panel used to Connect the hinge panel to a return panel about the door.

• Width: 1196mm
• Depth: 150mm
• Thickness: 8mm
• Weight:  3.6kg
• Use With Hinge Panel: 579mm

38mm Diameter Flat Splashback Pin Cap

•316 Grade Stainless Steel •M12 thread in the back •12mm Thick with Bevelled Cap Finish •1mm Thick Washer Included You will also need to order the correct installation rod •Installation into timber will require a Lag Screw to Metric Thread •Installation into Brick/concrete will require a Threaded Rod

19mm Wide 2100mm Long Chrome Shower Screen Aluminium U Channel

• 19mm Slimline Anodised Aluminium Channel
• Adds 8mm to the overall glass width
• High Polished Chrome Look Finish
• Dry Glaze System - No need for silicon in glass
• Suits 10mm Glass
• Consider using where the wall is out of square (up to 6mm) or where a slimline channel looks is desired
• Unique Aluminium extrusion has internal ribs which hold secure 2part Clear Glazing PVC
• Fast Installation
• U-Channel & 2 Part Glazing PVC Included

Custom Glass

Glass Supplied to almost any size and shape. Glass is cut from a 5500x2800mm panel. Glass supplied in thicknesses from 4mm to 19mm thick. Please email your requirements to sales@diyglass.com.au including and drawing of your required panel and your postcode for delivery.

D Front, Round Back Glass Clamp for Glass Balustrade / Pool Fence

• Round Back to suit a 50mm Diameter Post
• Use for Glass Balustrade / Pool Fence
• Suitable for 8, 10 and 12mm Glass - Gaskets provided
• 316 Marine Grade Stainless Steel
• Available in Mirror or Satin finish

Square Front, Flat Back Glass Clamp for Glass Balustrade / Pool Fence

Square Front, Flat Back Glass Clamp

• Flat back for installation onto timber or steel post or brick wall
• Use for Glass Balustrade / Pool Fence
• Suitable for 8, 10 and 12mm Glass - Gaskets provided
• 316 Marine Grade Stainless Steel
• Available in Mirror or Satin finish

Square Front, Round Back Glass Clamp for Glass Balustrade / Pool Fence

Square Front, Round Back Glass Clamp

• Radius back for installation onto a 2 Inch Diameter Post
• Use for Glass Balustrade / Pool Fence
• Suitable for 8, 10 and 12mm Glass - Gaskets provided
• 316 Marine Grade Stainless Steel
• Available in Mirror or Satin finish

480x850x10mm Toughened and Heat Soaked Glass with Polished edges

Toughend Glass Balustrade Panel

• Width: 480mm
• Height: 850mm
• Thickness: 10mm
• Weight: 10kg

Suitable for installation with:

• Posts
• Side Fix glass clamps

530x850x10mm Toughened and Heat Soaked Glass with Polished edges

Glass is certified to Australian Standards

• Width: 530mm
• Height: 850mm
• Thickness: 10mm
• Weight: 11kg

Suitable for installation with:

• Posts
• Side Fix glass clamps

580x850x10mm Toughened and Heat Soaked Glass with Polished edges

Glass is certified to Australian Standards

• Width: 580mm
• Height: 850mm
• Thickness: 10mm
• Weight: 12kg

Suitable for installation with:

• Posts
• Side Fix glass clamps

630x850x10mm Toughened and Heat Soaked Glass with Polished edges

Glass is certified to Australian Standards

• Width: 630mm
• Height: 850mm
• Thickness: 10mm
• Weight: 13kg

Suitable for installation with:

• Posts
• Side Fix glass clamps

680x850x10mm Toughened and Heat Soaked Glass with Polished edges

Glass is certified to Australian Standards

• Width: 680mm
• Height: 850mm
• Thickness: 10mm
• Weight: 14kg

Suitable for installation with:

• Posts
• Side Fix glass clamps

730x850x10mm Toughened and Heat Soaked Glass with Polished edges

Glass is certified to Australian Standards

• Width: 730mm
• Height: 850mm
• Thickness: 10mm
• Weight: 16kg

Suitable for installation with:

• Posts
• Side Fix glass clamps

780x850x10mm Toughened and Heat Soaked Glass with Polished edges

Glass is certified to Australian Standards

• Width: 780mm
• Height: 850mm
• Thickness: 10mm
• Weight: 17kg

Suitable for installation with:

• Posts
• Side Fix glass clamps

830x850x10mm Toughened and Heat Soaked Glass with Polished edges

Glass is certified to Australian Standards

• Width: 830mm
• Height: 850mm
• Thickness: 10mm
• Weight: 18kg

Suitable for installation with:

• Posts
• Side Fix glass clamps

880x850x10mm Toughened and Heat Soaked Glass with Polished edges

Glass is certified to Australian Standards

• Width: 880mm
• Height: 850mm
• Thickness: 10mm
• Weight: 19kg

Suitable for installation with:

• Posts
• Side Fix glass clamps

930x850x10mm Toughened and Heat Soaked Glass with Polished edges

Glass is certified to Australian Standards

• Width: 930mm
• Height: 850mm
• Thickness: 10mm
• Weight: 20kg

Suitable for installation with:

• Posts
• Side Fix glass clamps

980x850x10mm Toughened and Heat Soaked Glass with Polished edges

Glass is certified to Australian Standards

• Width: 980mm
• Height: 850mm
• Thickness: 10mm
• Weight: 21kg

Suitable for installation with:

• Posts
• Side Fix glass clamps

1030x850x10mm Toughened and Heat Soaked Glass with Polished edges

Glass is certified to Australian Standards

• Width: 1030mm
• Height: 850mm
• Thickness: 10mm
• Weight: 22kg

Suitable for installation with:

• Posts
• Side Fix glass clamps

1080x850x10mm Toughened and Heat Soaked Glass with Polished edges

Glass is certified to Australian Standards

• Width: 1080mm
• Height: 850mm
• Thickness: 10mm
• Weight: 23kg

Suitable for installation with:

• Posts
• Side Fix glass clamps

1130x850x10mm Toughened and Heat Soaked Glass with Polished edges

Glass is certified to Australian Standards

• Width: 1130mm
• Height: 850mm
• Thickness: 10mm
• Weight: 24kg

Suitable for installation with:

• Posts
• Side Fix glass clamps

1180x850x10mm Toughened Glass Balustrade Panel with Polished edges

Glass is certified to Australian Standards

• Width: 1180mm
• Height: 850mm
• Thickness: 10mm
• Weight: 25kg

Suitable for installation with:

• Posts
• Side Fix glass clamps

1230x850x10mm Toughened Glass Balustrade Panel with Polished edges

Glass is certified to Australian Standards

• Width: 1230mm
• Height: 850mm
• Thickness: 10mm
• Weight: 26kg

Suitable for installation with:

• Posts
• Side Fix glass clamps

1280x850x10mm Toughened Glass Balustrade Panel with Polished edges

Glass is certified to Australian Standards

• Width: 1280mm
• Height: 850mm
• Thickness: 10mm
• Weight: 27kg

Suitable for installation with:

• Posts
• Side Fix glass clamps

1330x850x10mm Toughened Glass Balustrade Panel with Polished edges

Glass is certified to Australian Standards

• Width: 1330mm
• Height: 850mm
• Thickness: 10mm
• Weight: 28kg

Suitable for installation with:

• Posts
• Side Fix glass clamps

1380x850x10mm Toughened Glass Balustrade Panel with Polished edges

Glass is certified to Australian Standards

• Width: 1380mm
• Height: 850mm
• Thickness: 10mm
• Weight: 29kg

Suitable for installation with:

• Posts
• Side Fix glass clamps

1430x850x10mm Toughened Glass Balustrade Panel with Polished edges

Glass is certified to Australian Standards

• Width: 1430mm
• Height: 850mm
• Thickness: 10mm
• Weight: 30kg

Suitable for installation with:

• Posts
• Side Fix glass clamps

End Post Over Run - 2 Inch Slotted Round for Stainless Rail

2" Round Slotted End Post for Stainless Rail Position: End - Where the rail continues over the post and connects to a wall or post Use: Glass Balustrade Material: 2" Mirror Finish Single Slot Tube Height: 970mm Grade: 316 Marine Grade Stainless Base: 3 Hole Round Flange Top: Perpendicular Joiner Glass: Install with 850mm Glass Panels Handrail: Install with 2 Inch Round Stainless Top Rail

19mm Wide 2100mm long Matt Black Shower Screen Aluminium U Channel

• 19mm Slimline Anodised Aluminium Channel
• Adds 8mm to the overall glass width
• Matt Black Finish
• Dry Glaze System - No need for silicon in glass
• Suits 10mm Glass
• Consider using where the wall is out of square (up to 6mm) or where a slimline channel looks is desired
• Unique Aluminium extrusion has internal ribs which hold secure 2part Clear Glazing PVC
• Fast Installation
• U-Channel & 2 Part Glazing PVC Included

Matt Black Base Plate Spigot

• Matt Black Powder Coated Stainless Steel
• Easy Top Mount Base Plate Installation
• Double Friction of easy glass alignment
• Friction Fit Glass (no holes in glass required)
• Suits 12mm thick glass
• 45mm Front profile
• 4 x 11mm Counter Sunk Holes for timber screw or Countersunk bolt installation

Click Here to view to Base Plate Spigot installation guide

Cover for Matt Black Base Plate Spigot

Matt Black Anodise Aluminium Easy fits over Top Mount Base Plate spigot

Matt Black Core Hole Pool Fence Spigot

• Matt Black Powder Coated Stainless Steel
• Core Hole Installation
• Double Friction of easy glass alignment
• Friction Fit Glass (no holes in glass required)
• Suits 12mm thick glass
• 45mm Front profile

Cover for Matt Black Core Hole Spigot

Matt Black Anodise Aluminium Easy fits over Top Mount Base Plate spigot

900x970x 8mm Gate Panel

900x970 x 8mm Gate Panel

Glass Carying Gloves

Glass Carrying Gloves Reduces slippage and makes the glass feel lighter as you do not need to grip it so tight. We moved 65 tonn of glass before we discovered these gloves. Our warehouse staff felt blessed the day they arrived. They are so good....

1200/1400mm High x 1200mm Wide Step down panel

Glass is certified to Australian Standards

Use against a retraining wall or when the height of the glass needs to change.

• Width: 1200mm
• Height: 1200 to 1400mm
• Thickness: 12mm

Suitable for installation with:

• Friction Spigots
• Posts
• Deck Mount Channel
• Side Fix glass clamps

Used for:

• Glass Pool Fencing
• Face Mount Glass Balustrading

1200/1800mm High x 1200mm Wide Step down panel

Glass is certified to Australian Standards

Use against a retraining wall or when the height of the glass needs to change.

• Width: 1200mm
• Height: 1200 to 1800mm
• Thickness: 12mm

Suitable for installation with:

• Friction Spigots
• Posts
• Deck Mount Channel
• Side Fix glass clamps

Used for:

• Glass Pool Fencing
• Face Mount Glass Balustrading

Black38mm Diameter Round Offset Fixed Bracket - Suits Round and Flat Rails

• Black 38mm Diameter Round Cap
• Suits round or flat rails
• Includes 3 Saddles 38mm, 50mm and Flat. You can simply change the saddle to use with different profile handrails.

• Requires a 20mm Diameter Hole in the glass

• Use with our pre-drilled 970mm and 1280mm glass panels

19mm Deep 2100mm Long Satin Shower Screen Aluminium U Channel

• 19mm Slimline Anodised Aluminium Channel
• Adds 8mm to the overall glass width
• Satin Finish
• Dry Glaze System - No need for silicon in glass
• Suits 10mm Glass
• Consider using where the wall is out of square (up to 6mm) or where a slimline channel looks is desired
• Unique Aluminium extrusion has internal ribs which hold secure 2part Clear Glazing PVC
• Fast Installation
• U-Channel & 2 Part Glazing PVC Included

Black Glass to Glass - 90 Degree Corner - Glass Brace for Stiffening Glass Pool Fences

Used as a rigidity brace on a glass pool fence or glass balustrade.

• Black Glass to Glass at a 90 Degree Corner
• Use for Stiffening Glass Pool Fences
• Suitable for 12mm Glass
• Friction fixed so not holes in glass required.
• Made from Powder Coated solid 316 Grade Stainless

Black Glass to Wall - Glass Brace for Stiffening Glass Pool Fences

Used as a rigidity brace on a glass pool fence or glass balustrade.

• Black Glass to Wall/Post
• Use for Stiffening Glass Pool Fences
• Suitable for 12mm Glass
• Friction fixed so not holes in glass required.
• Made from Powder Coated solid 316 Grade Stainless
• 2 screws required (sold separately)

Black Glass to Glass - Straight - Large - Glass Brace for Stiffening Glass Pool Fences

Used as a rigidity brace on a glass pool fence or glass balustrade.

• Black Glass to Glass in a Straight Line
• Use for Stiffening Glass Pool Fences
• Suitable for 12mm Glass
• 140mm Long x 25mm Wide
• Minimum gap between glass panels is 20mm
• Maximum gap between glass panels is 95mm
• Friction fixed so not holes in glass required.
• Made from Powder Coated solid 316 Grade Stainless

Black Glass to Glass - Straight - Small - Glass Brace for Stiffening Glass Pool Fences

Used as a rigidity brace on a glass pool fence or glass balustrade.

• Black Glass to Glass in a Straight Line
• Use for Stiffening Glass Pool Fences
• Suitable for 12mm Glass
• 75mm Long x 25mm Wide
• Minimum gap between glass panels is 20mm
• Maximum gap between glass panels is 50mm
• Friction fixed so not holes in glass required.
• Made from Powder Coated solid 316 Grade Stainless

Black Glass to Glass - Swivel - Glass Brace for Stiffening Glass Pool Fences

Used as a rigidity brace on a glass pool fence or glass balustrade.

• Black Glass to Glass at an odd angle Corner
• Use for Stiffening Glass Pool Fences
• Suitable for 12mm Glass
• Friction fixed so not holes in glass required.
• Made from Powder Coated solid 316 Grade Stainless

Matt Black 25x21mm 5800mm Long Slotted Rectangle Tube for Glass Balustrade / Pool Fence Top Rail

• Black Powder Coated 316 grade Stainless Steel
• Use for Glass Balustrade or Glass Pool Fence Top Rail
• Fits directly onto the top of the glass
• 316 grade Stainless Steel
• 14x14mm Slot
• Install with glazing rubber or silicon directly to the glass

Matt Black 25x21mm Wall Plate for Glass Balustrade / Pool Fence Top Rail

• Used to attach rail to flat post or wall
• Use for Glass Balustrade or Glass Pool Fence Top Rail
• Powder Coated 316 grade Stainless Steel
• Fit by Welding or epoxy glue

Matt Black 25x21mm End Cap for Glass Balustrade / Pool Fence Top Rail

• Powder Coated 316 grade Stainless Steel
• Use for Glass Balustrade or Glass Pool Fence Top Rail
• Fit by Welding or epoxy glue

Black Square Front, Flat Back Glass Clamp for Glass Balustrade / Pool Fence

Black, Square Front, Flat Back Glass Clamp

• Flat back for installation onto timber or steel post or brick wall
• Use for Glass Balustrade / Pool Fence
• Suitable for 8, 10 and 12mm Glass - Gaskets provided
• Black Powder Coated 316 Marine Grade Stainless Steel

Black Glass to Wall - Offset Wall Clamp

Used for glass to wall or post bracing.

• Friction fit
• Brace glass to posts and walls
• Suitable for 12mm Glass
• Retrofit to existing glass
• Easy to install with offset hole to the side of the glass

Glass to Wall - Offset Wall Clamp

Stainless Steel Offset wall clamp used for glass to wall or post bracing.

• Friction fit
• Brace glass to posts and walls
• Suitable for 12mm Glass
• Retrofit to existing glass
• Easy to install with offset hole to the side of the glass

Matt Black 25x21mm Extended Wall Plate for Glass Balustrade / Pool Fence Top Rail

• Black Powder Coated 316 grade Stainless Steel
• Extened Wall Plate for use with Face Mount Glass Balustrade
• Used to attach rail to flat post or wall
• Use for Glass Balustrade or Glass Pool Fence Top Rail
• Fit by Welding or epoxy glue

Matt Black 25x21mm Adjustable Vertical Joiner for Glass Balustrade / Pool Fence Top Rail

• Black Powder Coated 316 grade Stainless Steel
• Joins 25x21mm Slotted Tube at a change of Vertical Joiner (eg. Down Stairs)
• Use for Glass Balustrade or Glass Pool Fence Top Rail
• Fit by Welding or epoxy glue

Matt Black 25x21mm 90 Degree Vertical Joiner for Glass Balustrade / Pool Fence Top Rail

• Black Powder Coated 316 grade Stainless Steel
• allows you to run the rail down the side of the glass edge
• Fit by epoxy glue

Matt Black 25x21mm 90 Degree Joiner for Glass Balustrade / Pool Fence Top Rail

• Black Powder Coated 316 grade Stainless Steel
• Joins 25x21mm Slotted Tube at a 90 degree angle (on a corner)
• 316 grade Stainless Steel
• Fit by Welding or epoxy glue
• Available in Mirror or satin finish

Matt Black 25x21mm In-Line Joiner for Glass Balustrade / Pool Fence Top Rail

• Black Powder Coated 316 grade Stainless Steel
• Joins 2 straight lengths of 25x21mm Slotted Stainless Steel Tube
• Use for Glass Balustrade or Glass Pool Fence Top Rail
• 316 grade Stainless Steel
• Fit by Welding or epoxy glue
• Available in Mirror or satin finish

Matt Black 25x21mm Adjustable Horizontal Joiner for Glass Balustrade / Pool Fence Top Rail

• Black Powder Coated 316 grade Stainless Steel
• Joins 25x21mm Slotted Tube at a Corner that is not 90 degrees
• Use for Glass Balustrade or Glass Pool Fence Top Rail
• Fit by Welding or epoxy glue

Matt Black Glass to Glass Pool Fence Gate Hinge Set

• Matt Black Glass to Glass Gate Hinge
• Use for Glass Pool Fence Gate or Glass Balustrade Gate
• Suits 8 & 10mm Glass Gates
• Suits 12mm Hinge Panel
• 316 Grade Stainless powder coated backing plate
• Sold as a pair
• Gate needs to be drilled with 4 x 10mm Holes (24mm in from the side and 47 apart)
• Hinge panel needs to be drilled 4 x 14mm Holes (40mm in from the side and 60mm apart)
• For best results allow for a 16mm gap between the hinge panel and gate

Black Glass to Wall/Square Post Pool Fence Hinge Set

• Glass to Wall/Square Post
• Use for Glass Pool Fence or Glass Balustrade Gate
• Suits 8 & 10mm Glass Gates
• 316 Grade Stainless
• Gate needs to be drilled with 4 x 10mm Holes (24mm in from the side and 47 apart)
• You will need to allow for a gap of 22mm between the gate and post

25x21mm 90 Degree Vertical Joiner for Glass Balustrade / Pool Fence Top Rail

• 316 grade Stainless Steel
• Allows you to run the rail down the side of the glass edge
• 316 grade Stainless Steel
• Fit by epoxy glue

250x1200x12mm Toughened Pool Fence / Balustrade Panels with Polished Edges

• Width: 250mm
• Height: 1200mm
• Thickness: 12mm

Suitable for installation with:

• Friction Spigots
• Posts
• Deck Mount Channel
• Side Fix glass clamps

Used for:

• Glass Pool Fencing
• Face Mount Glass Balustrading

It can be installed with a Top Mounted Rail

Glass is certified to Australian Standards

350x1200x12mm Toughened Pool Fence / Balustrade Panels with Polished Edges

Glass is certified to Australian Standards

• Width: 350mm
• Height: 1200mm
• Thickness: 12mm

Suitable for installation with:

• Friction Spigots
• Posts
• Deck Mount Channel
• Side Fix glass clamps

Used for:

• Glass Pool Fencing
• Face Mount Glass Balustrading

It can be installed with a Top Mounted Rail

Wall Bracket - Brushed Brass / Gold - For Shower Screen

Used to fix Hinge and Return/Fixed panels to the wall.

3 Per Panel recommended

• Wall Bracket
• 3mm Gap between glass and wall
• Brushed Brass / Gold Finish
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• 2 x Compression/Friction screws
• No holes in glass required
• Made from solid brass
• 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

Offset Wall Bracket - Brushed Brass / Gold - For Shower Screen

Used to fix Hinge and Return/Fixed panels to the wall in a shower screen.

3 Per Panel recommended

These are easier to install then the hidden screw wall bracket. The screw can be marked and installed with the glass standing in place.

• Offset Wall Bracket for Shower Screens
• Brushed Gold Finish
• 3mm Gap between glass and wall
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• 2 x Compression/Friction screws
• No holes in glass required
• Made from solid brass
• 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used.

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

135 Degree Glass to Glass Brushed Brass / Gold Shower Screen Door Hinge

2 required per door

• 135 Degree Glass to Glass Hinge
• Brushed Brass / Gold Finish
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards
• Made from solid brass

Custom Mitre cut glass required for Hinge Panel

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

Offset Wall to Glass Brushed Brass / Gold Shower Screen Door Hinge

2 required per door

• Brushed Brass / Gold Finish
• Offset Wall to Glass Hinge
• 3 x Fixing Holes
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards
• Made from solid brass
• Fixing Screws included
• Allen Key & Gaskets included

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

Wall to Glass Brushed Brass / Gold Shower Screen Door Hinge

2 required per door

• Wall to Glass Hinge
• Brushed Brass / Gold Finish
• 4 x Fixing Holes
• Allow 9mm gap between Wall and Glass
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards
• Made from solid brass
• Fixing Screws included
• Allen Key & Gaskets included

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

Glass to Glass Brushed Brass / Gold Shower Screen Door Hinge

2 required per door

• Glass to Glass Hinge
• Brushed Brass / Gold Finish
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards (90 Degrees inwards and Outwards)
• Will hold door at 90 degrees inwards, 90 Degree Outwards and 180 Degrees closed.
• Made from solid brass
• Allen Key & Gaskets included

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

19mm Wide 2100mm Long Brushed Brass / Gold Shower Screen Aluminium U Channel

• 19mm Slimline Anodised Aluminium Channel
• Adds 8mm to the overall glass width
• Brushed Brass / Gold Finish
• Dry Glaze System - No need for silicon in glass
• Suits 10mm Glass
• Consider using where the wall is out of square (up to 6mm) or where a slimline channel looks is desired
• Unique Aluminium extrusion has internal ribs which hold secure 2part Clear Glazing PVC
• Fast Installation
• U-Channel & 2 Part Glazing PVC Included

35mm Deep 2100mm Long Brushed Brass / Gold Shower Screen Aluminium U Channel

• 35mm Deep Anodised Aluminium Channel
• Adds 10mm to 25mm to the overall glass width
• Brushed Gold Finish
• Dry Glaze System - No need for silicon in glass
• Suits 10mm Glass
• Consider using where the wall is out of square (up to 15mm) or where a slimline channel looks is desired
• Unique Aluminium extrusion has internal ribs which hold secure 2part Clear Glazing PVC
• Fast Installation
• U-Channel & 2 Part Glazing PVC Included

Large Glass Brace Bracket - Brushed Brass / Gold - For Shower Screen

Used to stiffen and brace a return or hinge panel by fixing a brace panel along the top and tying them together.

Can also be used to tie a Fixed panel back to the wall.

• Small Glass Brace Bracket
• Square Finish Edges
• Brace 8mm thick glass hood to 10mm thick return & hinge panels
• 4 x compression/friction screws
• Sturdy design
• No holes required in glass

Tip: Place bracket ensuring glass door does not hit when swinging inwards.

Small Glass Brace Bracket - Brushed Brass / Gold - For Shower Screen

Used to stiffen and brace a return or hinge panel by fixing a brace panel along the top and tying them together.

Can also be used to tie a Fixed panel back to the wall.

• Small Glass Brace Bracket
• Square Finish Edges
• Brace 8mm thick glass hood to 10mm thick return & hinge panels
• 2 x compression/friction screws
• Slimline Design
• No holes required in glass

Tip: Place bracket ensuring glass door does not hit when swinging inwards.

Glass to Wall Adjustable Horizontal Support Arm - Brushed Brass / Gold - For Shower Screen

Used to stiffen and brace a Return/Fixed panel by connecting it to the adjacent wall.

• Adjacent Wall to Glass support arm
• Adjustable length by cutting the tube to the required length.
• Maximum width of 1200mm
• Hidden fixing wall installation for a neat finish.
• Suitable for 8 and 10mm thick glass
• Compression/friction screws secure to the glass. No holes in glass required

Glass to Back Wall Brace Bracket - Brushed Brass / Gold - For Shower Screen

Used to stiffen and brace a Return/Fixed panel by tying it to the wall.

• Back Wall to Glass support arm
• Double adjustability for easy installation. Adjustable at wall & at glass
• Hidden fixing wall installation for a neat finish.
• Suitable for 8 and 10mm thick glass
• Compression/friction screws secure to the glass. No holes in glass required

Round Slimline Brushed Brass / Gold Shower Screen Door Knob

• Round Knob for Glass Shower Screen Door
• Brushed Brass / Gold Finish
• Double pull knob
• Suits 8mm, 10mm and 12mm thick glass
• Requires a 12mm hole in the door
• Made from Solid Brass
• Nylon spacers and gaskets included to prevent glass/metal contact

Matt White Round Glass Shower Screen Door Knob

• Round Knob for Glass Shower Screen Door
• Matt White Finish
• Double pull knob
• Suits 8mm, 10mm and 12mm thick glass
• Requires a 12mm hole in the door
• Made from Solid Brass
• Nylon spacers and gaskets included to prevent glass/metal contact

Matt White Glass to Back Wall Brace Bracket

Used to stiffen and brace a Return/Fixed panel by tying it to the wall.

• Back Wall to Glass support arm
• Double adjustability for easy installation. Adjustable at wall & at glass
• Hidden fixing wall installation for a neat finish.
• Suitable for 8 and 10mm thick glass
• Compression/friction screws secure to the glass. No holes in glass required

Matt White Glass to Wall Adjustable Horizontal Glass Shower Screen Support Arm

Used to stiffen and brace a Return/Fixed panel by connecting it to the adjacent wall.

• Adjacent Wall to Glass support arm
• Adjustable length by cutting the tube to the required length.
• Maximum width of 1200mm
• Hidden fixing wall installation for a neat finish.
• Suitable for 8 and 10mm thick glass
• Compression/friction screws secure to the glass. No holes in glass required

Matt White Small Glass Brace Bracket

Used to stiffen and brace a return or hinge panel by fixing a brace panel along the top and tying them together.

Can also be used to tie a Fixed panel back to the wall.

• Small Glass Brace Bracket
• Square Finish Edges
• Brace 8mm thick glass hood to 10mm thick return & hinge panels
• 2 x compression/friction screws
• Slimline Design
• No holes required in glass

Tip: Place bracket ensuring glass door does not hit when swinging inwards.

Matt White Large Glass Brace Bracket

Used to stiffen and brace a return or hinge panel by fixing a brace panel along the top and tying them together.

Can also be used to tie a Fixed panel back to the wall.

• Small Glass Brace Bracket
• Square Finish Edges
• Brace 8mm thick glass hood to 10mm thick return & hinge panels
• 4 x compression/friction screws
• Sturdy design
• No holes required in glass

Tip: Place bracket ensuring glass door does not hit when swinging inwards.

Matt White 35mm Deep 2100mm Long Shower Screen Wall Channel

• 35mm Deep Aluminium Channel
• Adds 10mm to 25mm to the overall glass width
• Matt White Finish
• Dry Glaze System - No need for silicon in glass
• Suits 10mm Glass
• Consider using where the wall is out of square (up to 15mm) or where a slimline channel looks is desired
• Unique Aluminium extrusion has internal ribs which hold secure 2part Clear Glazing PVC
• Fast Installation
• U-Channel & 2 Part Glazing PVC Included

Matt White 19mm Deep 2100mm Long Shower Screen Wall Channel

• 19mm Slimline Aluminium Channel
• Adds 8mm to the overall glass width
• Matt White Finish
• Dry Glaze System - No need for silicon in glass
• Suits 10mm Glass
• Consider using where the wall is out of square (up to 6mm) or where a slimline channel looks is desired
• Unique Aluminium extrusion has internal ribs which hold secure 2part Clear Glazing PVC
• Fast Installation
• U-Channel & 2 Part Glazing PVC Included

Matt White Glass to Glass Shower Screen Door Hinge

2 required per door

• Glass to Glass Hinge
• Matt White Finish
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards (90 Degrees inwards and Outwards)
• Will hold door at 90 degrees inwards, 90 Degree Outwards and 180 Degrees closed.
• Made from solid brass
• Allen Key & Gaskets included

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

Matt White Wall to Glass Shower Screen Door Hinge

2 required per door

• Wall to Glass Hinge
• Matt White Finish
• 4 x Fixing Holes
• Allow 9mm gap between Wall and Glass
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards
• Made from solid brass
• Fixing Screws included
• Allen Key & Gaskets included

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

Matt White Glass Shower Screen Offset Wall to Glass Door Hinge

2 required per door

• Matt White Finish
• Offset Wall to Glass Hinge
• 3 x Fixing Holes
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards
• Made from solid brass
• Fixing Screws included
• Allen Key & Gaskets included

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

Matt White Glass Shower Screen 135 Degree Door Hinge

2 required per door

• 135 Degree Glass to Glass Hinge
• Matt White Finish
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards
• Made from solid brass

Custom Mitre cut glass required for Hinge Panel

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

Matt White Glass Shower Screen Offset Wall Bracket

Used to fix Hinge and Return/Fixed panels to the wall in a shower screen.

3 Per Panel recommended

These are easier to install then the hidden screw wall bracket. The screw can be marked and installed with the glass standing in place.

• Offset Wall Bracket for Shower Screens
• Matt White Finish
• 3mm Gap between glass and wall
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• 2 x Compression/Friction screws
• No holes in glass required
• Made from solid brass
• 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used.

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

Matt White Glass Shower Screen Wall Bracket

Used to fix Hinge and Return/Fixed panels to the wall.

3 Per Panel recommended

• Wall Bracket
• 3mm Gap between glass and wall
• Matt White Finish
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• 2 x Compression/Friction screws
• No holes in glass required
• Made from solid brass
• 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

Gunmetal Grey Glass Shower Screen Wall Bracket

Used to fix Hinge and Return/Fixed panels to the wall.

3 Per Panel recommended

• Wall Bracket
• 3mm Gap between glass and wall
• Gunmetal Grey Finish
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• 2 x Compression/Friction screws
• No holes in glass required
• Made from solid brass
• 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

Gunmetal Grey Glass Shower Screen Offset Wall Bracket

Used to fix Hinge and Return/Fixed panels to the wall in a shower screen.

3 Per Panel recommended

These are easier to install then the hidden screw wall bracket. The screw can be marked and installed with the glass standing in place.

• Offset Wall Bracket for Shower Screens
• Gunmetal Grey Finish
• 3mm Gap between glass and wall
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• 2 x Compression/Friction screws
• No holes in glass required
• Made from solid brass
• 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used.

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

Gunmetal Grey Glass Shower Screen 135 Degree Door Hinge

2 required per door

• 135 Degree Glass to Glass Hinge
• Gunmetal Grey Finish
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards
• Made from solid brass

Custom Mitre cut glass required for Hinge Panel

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

Gunmetal Grey Glass Shower Screen Offset Wall to Glass Door Hinge

2 required per door

• Gunmetal Grey Finish
• Offset Wall to Glass Hinge
• 3 x Fixing Holes
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards
• Made from solid brass
• Fixing Screws included
• Allen Key & Gaskets included

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

Gunmetal Grey Wall to Glass Shower Screen Door Hinge

2 required per door

• Wall to Glass Hinge
• Gunmetal Grey Finish
• 4 x Fixing Holes
• Allow 9mm gap between Wall and Glass
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards
• Made from solid brass
• Fixing Screws included
• Allen Key & Gaskets included

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

Gunmetal Grey Glass to Glass Shower Screen Door Hinge

2 required per door

• Glass to Glass Hinge
• Gunmetal Grey Finish
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards (90 Degrees inwards and Outwards)
• Will hold door at 90 degrees inwards, 90 Degree Outwards and 180 Degrees closed.
• Made from solid brass
• Allen Key & Gaskets included

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

Gunmetal Grey Large Glass Brace Bracket

Used to stiffen and brace a return or hinge panel by fixing a brace panel along the top and tying them together.

Can also be used to tie a Fixed panel back to the wall.

• Small Glass Brace Bracket
• Square Finish Edges
• Brace 8mm thick glass hood to 10mm thick return & hinge panels
• 4 x compression/friction screws
• Sturdy design
• No holes required in glass

Tip: Place bracket ensuring glass door does not hit when swinging inwards.

Gunmetal Grey Small Glass Brace Bracket

Used to stiffen and brace a return or hinge panel by fixing a brace panel along the top and tying them together.

Can also be used to tie a Fixed panel back to the wall.

• Small Glass Brace Bracket
• Square Finish Edges
• Brace 8mm thick glass hood to 10mm thick return & hinge panels
• 2 x compression/friction screws
• Slimline Design
• No holes required in glass

Tip: Place bracket ensuring glass door does not hit when swinging inwards.

Gunmetal Grey Glass to Wall Adjustable Horizontal Glass Shower Screen Support Arm

Used to stiffen and brace a Return/Fixed panel by connecting it to the adjacent wall.

• Adjacent Wall to Glass support arm
• Adjustable length by cutting the tube to the required length.
• Maximum width of 1200mm
• Hidden fixing wall installation for a neat finish.
• Suitable for 8 and 10mm thick glass
• Compression/friction screws secure to the glass. No holes in glass required

Gunmetal Grey Glass to Back Wall Brace Bracket

Used to stiffen and brace a Return/Fixed panel by tying it to the wall.

• Back Wall to Glass support arm
• Double adjustability for easy installation. Adjustable at wall & at glass
• Hidden fixing wall installation for a neat finish.
• Suitable for 8 and 10mm thick glass
• Compression/friction screws secure to the glass. No holes in glass required

Gunmetal Grey Round Glass Shower Screen Door Knob

• Round Knob for Glass Shower Screen Door
• Gunmetal Grey Finish
• Double pull knob
• Suits 8mm, 10mm and 12mm thick glass
• Requires a 12mm hole in the door
• Made from Solid Brass
• Nylon spacers and gaskets included to prevent glass/metal contact

Brushed Nickel Glass Shower Screen Wall Bracket

Used to fix Hinge and Return/Fixed panels to the wall.

3 Per Panel recommended

• Wall Bracket
• 3mm Gap between glass and wall
• Brushed Nickel Finish
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• 2 x Compression/Friction screws
• No holes in glass required
• Made from solid brass
• 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.