Wall Bracket - Matt Black - For Glass Shower Screen

Used to fix Hinge and Return/Fixed panels to the wall.

3 Per Panel recommended

• Wall Bracket
• 3mm Gap between glass and wall
• Matt Black Finish
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• 2 x Compression/Friction screws
• No holes in glass required
• Made from solid brass
• 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

50mm Diameter Round Offset Bracket - Adjustable Height - Fixed Saddle

• 50mm Diameter Round Cap
• Suits Round and Flat Rails
• Adjustable Height
• Fixed Saddle
• Includes 3 Saddles 38mm, 50mm and Flat. You can simply change the saddle to use with different profile handrails.
• Requires a 20mm Diameter Hole in the Glass

D Front, Flat Back Glass Clamp for Glass Balustrade / Pool Fence

D Front, Flat Back Glass Clamp

• Flat back for installation onto timber or steel post or brick wall
• Use for Glass Balustrade / Glass Pool Fence
• Suitable for 8, 10 and 12mm Glass - Gaskets provided
• 316 Marine Grade Stainless Steel
• Available in Mirror or Satin finish

Black 38mm Diameter x 45mm Body Standoff for Face Mount Glass Balustrade / Pool Fence

• Black
• 8mm Diameter
• 45mm High Body
• Requires a 20mm Diameter hole in the glass
• Install using M12 Threaded Rod into masonry
• Install using M12 Metric to Lag Screw into timber
• Kit includes: Cap, Body, 2 x Plastic Washers and 1 x Bush
• For Face Mount Glass Balustrade / Pool Fence

M12 Fixing sold separately

630(w)x2041(h)x10mm Glass Shower Screen Knob Open Door Panel

For use with a Single Door Knob.

• Width: 630mm
• Height: 2041mm
• Thickness: 10mm
• Weight: 37kg
• Can be swung off the wall or a hinge panel

Requires 1 x Door Knob and 2 x Hinges.

597(w)x2050(h)x10mm Glass Shower Screen Return/Fixed Panel

This panel can be used as a return panel when installing a corner shower or a fixed panel when installing a single panel screen.

• Width: 597mm
• Height: 2050mm
• Thickness: 10mm
• Weight: 30kg
• Allow a 3mm Gap between the wall and glass and a 3mm Gap between this panel and the door.

Installation Widths:

• 600mm when installing with a wall bracket
• 607-610mm when installing with 19mm U Channel
• 607-622mm when installing with 35mm U Channel

600 x 1200 x 12mm Glass Pool Fence Hinge Panel

Glass Gate Hinge Panel. Used to swing a glass gate off.

• Width: 600mm
• Height: 1200mm
• Thickness: 12mm
• Weight: 22kg
• Holes: 4 x 14mm Holes to fix glass gate hinges

Suitable for installation with:

• Friction Spigots
• Deck Mount Channel

Used for:

• Glass Pool Fencing

It can be installed with a Top Mounted Rail

Glass is certified to Australian Standards

Note: This panel will need to be secured to a post or another glass panel using Glass Braces or Glass Clamps. It will not hole a gate if only supported by Spigots.

Sliding Shower Door Water Seal

• 2130mm Long
• Suits 10mm Glass
• 26mm Soft Flexible PVC Fin
• Reduces water escape between door and fixed panel

Glass to Glass Pool Fence Latch

• Glass to Glass Latch - Straight Line
• Use for Glass Pool Fence Gate or Glass Balustrade Gate
• Backing Plates are 316 Stainless Steel
• Requires Gate to be drilled (2 x 10mm Holes, 20mm in from edge and 42mm apart)
• Latch Panel must be 12mm - No holes required
• Suits 8, 10 and 12mm gates
• For best results leave a 9mm gap between the gate and latch panel

Square Cover for Square Core Hole Spigot

Neatly fits over our Square Core Hole Spigot to cover grout

25x21mm Adjustable Horizontal Joiner for Glass Balustrade / Pool Fence Top Rail

• Joins 25x21mm Slotted Tube at a Corner that is not 90 degrees
• Use for Glass Balustrade or Glass Pool Fence Top Rail
• 316 grade Stainless Steel
• Fit by Welding or epoxy glue
• Available in Mirror or satin finish

38mm Slotted End Cap for Glass Balustrade / Pool Fence Top Rail

• 38mm End Cap
• Use for Glass Balustrade or Glass Pool Fence Top Rail
• 316 grade Stainless Steel
• Fit by Welding or epoxy glue
• Available in Mirror or satin finish

38mm Adjustable Joiner for Glass Balustrade Offset Rail

• Joins 2 lengths of 38mm Tube at non 90 degree corner
• 316 grade Stainless Steel
• Fit by Welding or epoxy glue
• Available in Mirror or satin finish

800x1280 x 15mm Glass With 6 x Bottom Holes for Standoffs

• Width: 800mm
• Height: 1280mm
• Thickness: 15mm
• 6 x 22mm holes for Standoffs

Suitable for installation with:

• Glass Standoffs
• Top Mount Rail

10mm x 100mm Counter Sunk Screws x 4 pack

• 316 Grade Stainless
• Hex Head Drive
• Self Tapping
• 100mm long
• 18mm Outer Diameter Head
• Ideal for use with Square and Round Base Plate Spigots into timber
• 1 pack required per spigot

479(w)x2050(h)x10mm Glass Shower Screen Hinge Panel

• Width: 479mm
• Height: 2050mm
• Thickness: 10mm
• Weight: 24kg
• Allow a 3mm Gap between the wall and glass and a 5mm Gap between this panel and the door.

When installed using Wall Brackets:

• When installed with a 600mm door in a corner configuration using a return panel the overall width will be 1100mm
• When installed with a 600mm door between two wall the overall width will be 1090mm

When installed using U Channel:

• When installed with a 600mm door in a corner configuration using a return panel the overall width will be 1108mm
• When installed with a 600mm door between two wall the overall width will be 1098mm

Wall Bracket - Chrome Plated - For Shower Screen

Used to fix Hinge and Return/Fixed panels to the wall.

3 Per Panel recommended

• Wall Bracket
• 3mm Gap between glass and wall
• Chrome Plated Finish
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• 2 x Compression/Friction screws
• No holes in glass required
• Made from solid brass
• 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

Offset Wall Bracket - Matt Black - For Glass Shower Screen

Used to fix Hinge and Return/Fixed panels to the wall.

3 Per Panel recommended

These are easier to install then the hidden screw wall bracket. The screw can be marked and installed with the glass standing in place.

• Wall Bracket
• Matt Black Finish
• 3mm Gap between glass and wall
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• 2 x Compression/Friction screws
• No holes in glass required
• Made from solid brass
• 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used.

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

38mm Diameter Round Offset Bracket - Adjustable Height - Adjustable Saddle

• 38mm Diameter Round Cap
• Suits round and flat rails
• Adjustable Height
• Adjustable Saddle
• Includes 3 Saddles 38mm, 50mm and Flat. You can simply change the saddle to use with different profile handrails.
• Requires a 20mm Diameter Hole in the Glass

640(w)x2041(h)x10mm Glass Shower Screen Knob Open Door Panel

For use with a Single Door Knob.

• Width: 640mm
• Height: 2041mm
• Thickness: 10mm
• Weight: 39kg
• Can be swung off the wall or a hinge panel

Requires 1 x Door Knob and 2 x Hinges.

697(w)x2050(h)x10mm Glass Shower Screen Return/Fixed Panel

This panel can be used as a return panel when installing a corner shower or a fixed panel when installing a single panel screen.

• Width: 697mm
• Height: 2050mm
• Thickness: 10mm
• Weight: 36kg
• Allow a 3mm Gap between the wall and glass and a 3mm Gap between this panel and the door.

Installation Widths:

• 700mm when installing with a wall bracket
• 707-710mm when installing with 19mm U Channel
• 707-722mm when installing with 35mm U Channel

800 x 1200 x 12mm Glass Pool Fence Hinge Panel

Glass Gate Hinge Panel. Used to swing a glass gate off.

• Width: 800mm
• Height: 1200mm
• Thickness: 12mm
• Weight: 29kg
• Holes: 4 x 14mm Holes to fix glass gate hinges

Suitable for installation with:

• Friction Spigots
• Deck Mount Channel

Used for:

• Glass Pool Fencing

It can be installed with a Top Mounted Rail

Glass is certified to Australian Standards

Note: This panel will need to be secured to a post or another glass panel using Glass Braces or Glass Clamps. It will not hole a gate if only supported by Spigots.

Slimline Rail Wall Bracket

Only required if using a 650mm modular Fixed Glass Panel

Glass to Wall Pool Fence Latch

• Glass to Wall/Square Post
• Use for Glass Pool Fence Gate or Glass Balustrade Gate
• Backing Plates are powder coated 316 Stainless Steel
• Requires Gate to be drilled (2 x 12mm Holes, 20mm in from edge and 42mm apart)
• Suits 8, 10 and 12mm gates
• For best results leave a 9mm gap between the gate and Post/Wall

White 38mm Diameter x 45mm Body Standoff for Face Mount Glass Balustrade / Pool Fence

• White
• 8mm Diameter
• 45mm High Body
• Requires a 20mm Diameter hole in the glass
• Install using M12 Threaded Rod into masonry
• Install using M12 Metric to Lag Screw into timber
• Kit includes: Cap, Body, 2 x Plastic Washers and 1 x Bush
• For Face Mount Glass Balustrade / Pool Fence

M12 Fixing sold separately

25x21mm Adjustable Vertical Joiner for Glass Balustrade / Pool Fence Top Rail

• Joins 25x21mm Slotted Tube at a change of Vertical Joiner (eg. Down Stairs)
• Use for Glass Balustrade or Glass Pool Fence Top Rail
• 316 grade Stainless Steel
• Fit by Welding or epoxy glue
• Available in Mirror or satin finish

38mm Domed End Cap for Glass Balustrade Offset Rail

• 38mm Domed End Cap
• 316 grade Stainless Steel
• Fit by Welding or epoxy glue
• Available in Mirror or satin finish

38mm Diameter Adjustable Body Standoff for Face Mount Glass Balustrade / Pool Fence

• 38mm Diameter
• Adjusts between 23 and 40mm
• Ideal for fixing to an uneven surface
• Requires a 20-22mm Diameter hole in the glass
• Install using M12 Threaded Rod into masonry
• Install using M12 Metric to Lag Screw into timber
• Kit includes: Cap, Body, 2 x Plastic Washers and 1 x Bush
• For Face Mount Glass Balustrade / Pool Fence

850x1280 x 15mm Glass With 6 x Bottom Holes for Standoffs

• Width: 850mm
• Height: 1280mm
• Thickness: 15mm
• 6 x 22mm holes for Standoffs

Suitable for installation with:

• Glass Standoffs
• Top Mount Rail

1000 x 1200 x 12mm Glass Pool Fence Hinge Panel

Glass Gate Hinge Panel. Used to swing a glass gate off.

• Width: 1000mm
• Height: 1200mm
• Thickness: 12mm
• Weight: 36kg
• Holes: 4 x 14mm Holes to fix glass gate hinges

Suitable for installation with:

• Friction Spigots
• Deck Mount Channel

Used for:

• Glass Pool Fencing

It can be installed with a Top Mounted Rail

Glass is certified to Australian Standards

797(w)x2050(h)x10mm Glass Shower Screen Return/Fixed Panel

This panel can be used as a return panel when installing a corner shower or a fixed panel when installing a single panel screen.

• Width: 797mm
• Height: 2050mm
• Thickness: 10mm
• Weight: 43kg
• Allow a 3mm Gap between the wall and glass and a 3mm Gap between this panel and the door.

Installation Widths:

• 800mm when installing with a wall bracket
• 807-810mm when installing with 19mm U Channel
• 807-822mm when installing with 35mm U Channel

529(w)x2050(h)x10mm Glass Shower Screen Hinge Panel

• Width: 529mm
• Height: 2050mm
• Thickness: 10mm
• Weight: 27kg
• Allow a 3mm Gap between the wall and glass and a 5mm Gap between this panel and the door.

When installed using Wall Brackets:

• When installed with a 600mm door in a corner configuration using a return panel the overall width will be 1150mm
• When installed with a 600mm door between two wall the overall width will be 1140mm

When installed using U Channel:

• When installed with a 600mm door in a corner configuration using a return panel the overall width will be 1158mm
• When installed with a 600mm door between two wall the overall width will be 1148mm

50mm Diameter Round Offset Bracket - Adjustable Height - Adjustable Saddle

• 50mm Diameter Round Cap
• Suits round and flat rails
• Adjustable Height
• Adjustable Saddle
• Includes 3 Saddles 38mm, 50mm and Flat. You can simply change the saddle to use with different profile handrails.
• Requires a 20mm Diameter Hole in the Glass

Adjustable Glass to Wall Square Black Horizontal Support Arm - For Glass Shower Screen

Used to stiffen and brace a Return/Fixed panel by tying it to the wall.

• Wall to Glass support arm
• Matt Black Finish
• Width Adjustable up to 1200mm - Simply cut the tube to the required width
• Hidden fixing wall installation for a neat finish.
• Suitable for 8 and 10mm thick glass
• Compression/friction screws secure to the glass. No holes in glass required

90° Bracket for Sliding Shower Screen

Required when installing a sliding shower door with a glass return panel.

Glass to Glass 90 Degree External Latch

• Glass to Glass at a 90 Degree External Angle Latch
• Use for Glass Pool Fence Gate or Glass Balustrade Gate
• Backing Plates are 316 Stainless Steel
• Requires Gate to be drilled (2 x 10mm Holes, 20mm in from edge and 42mm apart)
• Latch Panel must be 12mm - No holes required
• Suits 8, 10 and 12mm gates
• For best results leave a 9mm gap between the gate and latch panel

25x21mm End Cap for Glass Balustrade / Pool Fence Top Rail

• 316 grade Stainless Steel
• Use for Glass Balustrade or Glass Pool Fence Top Rail
• Fit by Welding or epoxy glue
• Available in Mirror or satin finish

38mm Flat End Cap for Glass Balustrade Offset Rail

• 38mm Flat End Cap
• 316 grade Stainless Steel
• Fit by Welding or epoxy glue
• Available in Mirror or satin finish

50mm Diameter x 30mm Body Standoff for Face Mount Glass Balustrade / Pool Fence

• 50mm Diameter
• 30mm High Body
• Requires a 20-22mm Diameter hole in the glass
• Install using M12 Threaded Rod into masonry
• Install using M12 Metric to Lag Screw into timber
• Kit includes: Cap, Body, 2 x Plastic Washers and 1 x Bush
• For Face Mount Glass Balustrade / Pool Fence

M12 Fixing rods sold separately

900x1280 x 15mm Glass With 6 x Bottom Holes for Standoffs

• Width: 900mm
• Height: 1280mm
• Thickness: 15mm
• 6 x 22mm holes for Standoffs

Suitable for installation with:

• Glass Standoffs
• Top Mount Rail

Glass to Round Post Pool Fence Hinge Set

• Glass to Round Post Hinge Set
• Use for Glass Pool Fence or Glass Balustrade Gate
• Suits 8 & 10mm Glass Gates
• 316 Grade Stainless
• Gate needs to be drilled with 4 x 10mm Holes (24mm in from the side and 47 apart)
• You will need to allow for a gap of 20mm between the gate and post

1100 x 1200 x 12mm Glass Pool Fence Hinge Panel

Glass Gate Hinge Panel. Used to swing a glass gate off.

• Width: 1100mm
• Height: 1200mm
• Thickness: 12mm
• Weight: 40kg
• Holes: 4 x 14mm Holes to fix glass gate hinges

Suitable for installation with:

• Friction Spigots
• Deck Mount Channel

Used for:

• Glass Pool Fencing

It can be installed with a Top Mounted Rail

Glass is certified to Australian Standards

847(w)x2050(h)x10mm Glass Shower Screen Return/Fixed Panel

This panel can be used as a return panel when installing a corner shower or a fixed panel when installing a single panel screen.

• Width: 847mm
• Height: 2050mm
• Thickness: 10mm
• Weight: 43kg
• Allow a 3mm Gap between the wall and glass and a 3mm Gap between this panel and the door.

Installation Widths:

• 850mm when installing with a wall bracket
• 857-860mm when installing with 19mm U Channel
• 857-872mm when installing with 35mm U Channel

579(w)x2050(h)x10mm Glass Shower Screen Hinge Panel

• Width: 579mm
• Height: 2050mm
• Thickness: 10mm
• Weight: 30kg
• Allow a 3mm Gap between the wall and glass and a 5mm Gap between this panel and the door.

When installed using Wall Brackets:

• When installed with a 600mm door in a corner configuration using a return panel the overall width will be 1200mm
• When installed with a 600mm door between two wall the overall width will be 1190mm

When installed using U Channel:

• When installed with a 600mm door in a corner configuration using a return panel the overall width will be 1208mm
• When installed with a 600mm door between two wall the overall width will be 1198mm

Offset Wall Bracket - Chrome Plated - For Shower Screen

Used to fix Hinge and Return/Fixed panels to the wall in a shower screen.

3 Per Panel recommended

These are easier to install then the hidden screw wall bracket. The screw can be marked and installed with the glass standing in place.

• Offset Wall Bracket for Shower Screens
• Chrome Finish
• 3mm Gap between glass and wall
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• 2 x Compression/Friction screws
• No holes in glass required
• Made from solid brass
• 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used.

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

Small Glass Brace Bracket - Matt Black - For Glass Shower Screen

Used to stiffen and brace a return or hinge panel by fixing a brace panel along the top and tying them together.

Can also be used to tie a Fixed panel back to the wall.

• Small Glass Brace Bracket
• Matt Black Finish
• Square Finish Edges
• Brace 8mm thick glass hood to 10mm thick return & hinge panels
• 2 x compression/friction screws
• Slimline Design
• No holes required in glass
• Made from solid brass

Tip: Place bracket ensuring glass door does not hit when swinging inwards.

38mm Slotted Extended Wall Plate for Glass Balustrade / Pool Fence Top Rail

• Used to attach 38mm Round Slotted rail to flat post or wall
• Use for Glass Balustrade or Glass Pool Fence Top Rail
• 316 grade Stainless Steel
• Fit by Welding or epoxy glue
• Available in Mirror or satin finish

Bostik 6S Glass Shower Screen Glazing Silicon

• 300g Tube
• Translucent Finish
• High Performance
• Natural Cure
• Build in Mould Inhabitor

25x21mm Slotted End Cap for Glass Balustrade / Pool Fence Top Rail

• Used to attach the rail to a post or wall. Simply screw the end cap on then slide the rail over
• Use for Glass Balustrade or Glass Pool Fence Top Rail
• 316 grade Stainless Steel
• Fit by Welding or epoxy glue
• Available in Mirror or satin finish

950x1280 x 15mm Glass With 6 x Bottom Holes for Standoffs

• Width: 950mm
• Height: 1280mm
• Thickness: 15mm
• 6 x 22mm holes for Standoffs

Suitable for installation with:

• Glass Standoffs
• Top Mount Rail

Extender for Core Hole Spigots

• Use with Square and Round Core Hole Spigots
• Extends spigot by up to 200mm
• Made from 304 grade Stainless Steel

Glass to Round Post Deluxe Gate Pool Fence Latch

• Glass to Round Post Deluxe Latch
• Use for Glass Pool Fence Gate or Glass Balustrade Gate
• Backing Plates are 316 Stainless Steel
• Latch is 316 Stainless Steel
• Requires Gate to be drilled (2 x 12mm Holes, 20mm in from edge and 42mm apart)
• Suits 8, 10 and 12mm gates
• For best results leave a 9mm gap between the gate and Post/Wall

1200 x 1200 x 12mm Glass Pool Fence Hinge Panel

Glass Gate Hinge Panel. Used to swing a glass gate off.

• Width: 1200mm
• Height: 1200mm
• Thickness: 12mm
• Weight: 43kg
• Holes: 4 x 14mm Holes to fix glass gate hinges

Suitable for installation with:

• Friction Spigots
• Deck Mount Channel

Used for:

• Glass Pool Fencing

It can be installed with a Top Mounted Rail

Glass is certified to Australian Standards

Small Glass Brace Bracket - Chrome Plated - For Shower Screen

Used to stiffen and brace a return or hinge panel by fixing a brace panel along the top and tying them together.

Can also be used to tie a Fixed panel back to the wall.

• Small Glass Brace Bracket
• Square Finish Edges
• Brace 8mm thick glass hood to 10mm thick return & hinge panels
• 2 x compression/friction screws
• Slimline Design
• No holes required in glass
• Made from solid brass

Tip: Place bracket ensuring glass door does not hit when swinging inwards.

Large Glass Brace Bracket - Matt Black - For Glass Shower Screen

Used to stiffen and brace a return or hinge panel by fixing a brace panel along the top and tying them together.

Can also be used to tie a Fixed panel back to the wall.

• Small Glass Brace Bracket
• Matt Black Finish
• Square Finish Edges
• Brace 8mm thick glass hood to 10mm thick return & hinge panels
• 4 x compression/friction screws
• Sturdy design
• No holes required in glass
• Made from solid brass

Tip: Place bracket ensuring glass door does not hit when swinging inwards.

Black 50mm Diameter x 30mm Body Standoff for Face Mount Glass Balustrade / Pool Fence

• Black
• 50mm Diameter
• 30mm High Body
• Requires a 20-22mm Diameter hole in the glass
• Install using M12 Threaded Rod into masonry
• Install using M12 Metric to Lag Screw into timber
• Kit includes: Cap, Body, 2 x Plastic Washers and 1 x Bush
• For Face Mount Glass Balustrade / Pool Fence

M12 Fixing rods sold separately

20 x 1.5mm Thick Glass Setting Blocks

• 1.5mm THICK x 10mm WIDE x 50mm LONG CLEAR SETTING BLOCKS
• Pack of 20
• Install under any Hinge or Fixed panel to prevent it from sitting directly onto the tiles
• These are clear so will remain under the glass once the silicon has been applied

Ultraloc threadlocker 3242 Compound

10ml Bottle

Medium strength removable grade threadlocking compound

872(w)x2050(h)x10mm Glass Shower Screen Return/Fixed Panel

This panel can be used as a return panel when installing a corner shower or a fixed panel when installing a single panel screen.

• Width: 872mm
• Height: 2050mm
• Thickness: 10mm
• Weight: 45kg
• Allow a 3mm Gap between this panel and the door.

Installation Widths:

• 875mm when installing with a wall bracket
• 882-885mm when installing with 19mm U Channel
• 882-897mm when installing with 35mm U Channel

Polaris 125 Series Glass/Glass Hinges

The Polaris Soft Close Hinge is a state-of-the-art product unrivaled in design, style and safety

The Polaris soft close hinge is the safest and most reliable specially designed pool fence hinge in the industry that complies with the stringent Australian Standards AS1926 and AS 2820.

• New and improved 125 series hinge is now made with duplex SS2205 stainless steel
• Improved design features including commercial rated adjustable tension spring (tempered SS304) with multiple spring closing settings (soft, medium & strong) and the highest quality
• European made dampeners for smooth, soft close action
• Self closing hinge suitable for 10mm and 12mm thick glass gates
• Revolutionary anti-drop gate packing system significantly lowers the chance of gates dropping or sagging over time
• Easy installation process – install guide included in each box
• Available in polish, satin, matt black and matt white finishes

25x21mm Wall Plate for Glass Balustrade / Pool Fence Top Rail

• Used to attach rail to flat post or wall
• Use for Glass Balustrade or Glass Pool Fence Top Rail
• 316 grade Stainless Steel
• Fit by Welding or epoxy glue
• Available in Mirror or satin finish

1000x1280 x 15mm Glass With 6 x Bottom Holes for Standoffs

• Width: 1000mm
• Height: 1280mm
• Thickness: 15mm
• 6 x 22mm holes for Standoffs

Suitable for installation with:

• Glass Standoffs
• Top Mount Rail

1300 x 1200 x 12mm Glass Pool Fence Hinge Panel

Glass Gate Hinge Panel. Used to swing a glass gate off.

• Width: 1300mm
• Height: 1200mm
• Thickness: 12mm
• Weight: 47kg
• Holes: 4 x 14mm Holes to fix glass gate hinges

Suitable for installation with:

• Friction Spigots
• Deck Mount Channel

Used for:

• Glass Pool Fencing

It can be installed with a Top Mounted Rail

Glass is certified to Australian Standards

897(w)x2050(h)x10mm Glass Shower Screen Return/Fixed Panel

This panel can be used as a return panel when installing a corner shower or a fixed panel when installing a single panel screen.

• Width: 897mm
• Height: 2050mm
• Thickness: 10mm
• Weight: 46kg
• Allow a 3mm Gap between the wall and glass and a 3mm Gap between this panel and the door.

Installation Widths:

• 900mm when installing with a wall bracket
• 907-910mm when installing with 19mm U Channel
• 907-922mm when installing with 35mm U Channel

Large Glass Brace Bracket - Chrome Plated - For Shower Screen

Used to stiffen and brace a return or hinge panel by fixing a brace panel along the top and tying them together.

Can also be used to tie a Fixed panel back to the wall.

• Small Glass Brace Bracket
• Square Finish Edges
• Brace 8mm thick glass hood to 10mm thick return & hinge panels
• 4 x compression/friction screws
• Sturdy design
• No holes required in glass
• Made from solid brass

Tip: Place bracket ensuring glass door does not hit when swinging inwards.

Glass to Wall Adjustable Brace Bracket - Matt Black - For Glass Shower Screen

Used to stiffen and brace a Return/Fixed panel by tying it to the wall.

• Wall to Glass support arm
• Matt Black Finish
• Double adjustability for easy installation. Adjustable at wall & at glass
• Hidden fixing wall installation for a neat finish.
• Suitable for 8 and 10mm thick glass
• Compression/friction screws secure to the glass. No holes in glass required
• Made from Brass

Bostik Grout - HES 20kg Bag - Used for Core Hole installation

Bostik Grout - HES 20kg Bag

Used to install Core Hole Spigots

Click to View Data Sheet

20 x 3mm Thick Glass Setting Blocks

• 3mm THICK x 10mm WIDE x 50mm LONG CLEAR SETTING BLOCKS
• Pack of 20
• Install under any Hinge or Fixed panel to prevent it from sitting directly onto the tiles
• These are clear so will remain under the glass once the silicon has been applied

Polaris 125 Series Glass/Wall Hinges

The Polaris Soft Close Hinge is a state-of-the-art product unrivaled in design, style and safety

The Polaris soft close hinge is the safest and most reliable specially designed pool fence hinge in the industry that complies with the stringent Australian Standards AS1926 and AS 2820.

• New and improved 125 series hinge is now made with duplex SS2205 stainless steel
• Improved design features including commercial rated adjustable tension spring (tempered SS304) with multiple spring closing settings (soft, medium & strong) and the highest quality
• European made dampeners for smooth, soft close action
• Self closing hinge suitable for 10mm and 12mm thick glass gates
• Revolutionary anti-drop gate packing system significantly lowers the chance of gates dropping or sagging over time
• Easy installation process – install guide included in each box
• Available in polish, satin, matt black and matt white finishes

White 50mm Diameter x 30mm Body Standoff for Face Mount Glass Balustrade / Pool Fence

• White
• 50mm Diameter
• 30mm High Body
• Requires a 20-22mm Diameter hole in the glass
• Install using M12 Threaded Rod into masonry
• Install using M12 Metric to Lag Screw into timber
• Kit includes: Cap, Body, 2 x Plastic Washers and 1 x Bush
• For Face Mount Glass Balustrade / Pool Fence

M12 Fixing sold separately

50mm Diameter x 50mm Body Standoff for Face Mount Glass Balustrade / Pool Fence

• 50mm Diameter
• 50mm High Body
• Requires a 20-22mm Diameter hole in the glass
• Install using M12 Threaded Rod into masonry
• Install using M12 Metric to Lag Screw into timber
• Kit includes: Cap, Body, 2 x Plastic Washers and 1 x Bush
• For Face Mount Glass Balustrade / Pool Fence

M12 Fixing sold separately

1050x1280 x 15mm Glass With 6 x Bottom Holes for Standoffs

• Width: 1050mm
• Height: 1280mm
• Thickness: 15mm
• 6 x 22mm holes for Standoffs

Suitable for installation with:

• Glass Standoffs
• Top Mount Rail

1400 x 1200 x 12mm Glass Pool Fence Hinge Panel

Glass Gate Hinge Panel. Used to swing a glass gate off.

• Width: 1400mm
• Height: 1200mm
• Thickness: 12mm
• Weight: 50kg
• Holes: 4 x 14mm Holes to fix glass gate hinges

Suitable for installation with:

• Friction Spigots
• Deck Mount Channel

Used for:

• Glass Pool Fencing

It can be installed with a Top Mounted Rail

Glass is certified to Australian Standards

Glass to Back Wall Brace Bracket - Chrome Plated - For Shower Screen

Used to stiffen and brace a Return/Fixed panel by tying it to the wall.

• Back Wall to Glass support arm
• Double adjustability for easy installation. Adjustable at wall & at glass
• Hidden fixing wall installation for a neat finish.
• Suitable for 8 and 10mm thick glass
• Compression/friction screws secure to the glass. No holes in glass required
• Made from Brass

Square Matt Black Shower Screen Door Handle

• Square D Handle Shower Screen Door Handle
• Stainless Steel in Matt Black Finish
• Back to back pull handles
• Suits 8mm, 10mm and 12mm thick glass
• Requires 2 x 12mm holes at 155mm centres
• Nylon spacers and gaskets included to prevent glass/metal contact

25x21mm Extended Wall Plate for Glass Balustrade / Pool Fence Top Rail

• Extened Wall Plate for use with Face Mount Glass Balustrade
• Used to attach rail to flat post or wall
• Use for Glass Balustrade or Glass Pool Fence Top Rail
• 316 grade Stainless Steel
• Fit by Welding or epoxy glue
• Available in Mirror or satin finish

922(w)x2050(h)x10mm Glass Shower Screen Return/Fixed Panel

This panel can be used as a return panel when installing a corner shower or a fixed panel when installing a single panel screen.

• Width: 922mm
• Height: 2050mm
• Thickness: 10mm
• Weight: 47kg
• Allow a 3mm Gap between this panel and the door.

Installation Widths:

• 925mm when installing with a wall bracket
• 932-935mm when installing with 19mm U Channel
• 932-947mm when installing with 35mm U Channel

1100x1280 x 15mm Glass With 6 x Bottom Holes for Standoffs

• Width: 1100mm
• Height: 1280mm
• Thickness: 15mm
• 6 x 22mm holes for Standoffs

Suitable for installation with:

• Glass Standoffs
• Top Mount Rail

Glass is certified to Australian Standards
Toughened and Heat Soaked Glass with Polished Edges

1500 x 1200 x 12mm Glass Pool Fence Hinge Panel

Glass Gate Hinge Panel. Used to swing a glass gate off.

• Width: 1500mm
• Height: 1200mm
• Thickness: 12mm
• Weight: 54kg
• Holes: 4 x 14mm Holes to fix glass gate hinges

Suitable for installation with:

• Friction Spigots
• Deck Mount Channel

Used for:

• Glass Pool Fencing

It can be installed with a Top Mounted Rail

Glass is certified to Australian Standards

947(w)x2050(h)x10mm Glass Shower Screen Return/Fixed Panel

This panel can be used as a return panel when installing a corner shower or a fixed panel when installing a single panel screen.

• Width: 947mm
• Height: 2050mm
• Thickness: 10mm
• Weight: 48kg
• Allow a 3mm Gap between the wall and glass and a 3mm Gap between this panel and the door.

Installation Widths:

• 950mm when installing with a wall bracket
• 957-960mm when installing with 19mm U Channel
• 957-972mm when installing with 35mm U Channel

Glass to Ceiling Adjustable Brace Bracket - Chrome Plated - For Shower Screen

Used to stiffen and brace a Return/Fixed panel by tying it to the ceiling.

• Ceiling to Glass support arm
• Adjustable length by cutting the tube to the required length.
• Hidden fixing wall installation for a neat finish.
• Suitable for 8 and 10mm thick glass
• Compression/friction screws secure to the glass. No holes in glass required
• Made from Brass with Stainless Steel Tube

Square L Shape Matt Black Shower Screen Door Knob

• Square L Shape Knob for Shower Screen Door
• Matt Black Finish
• Double pull knob
• Suits 8mm, 10mm and 12mm thick glass
• Requires a 12mm hole in the glass
• Made from Solid Brass
• Nylon spacers and gaskets included to prevent glass/metal contact

Black 50mm Diameter x 50mm Body Standoff for Face Mount Glass Balustrade / Pool Fence

• Black
• 50mm Diameter
• 50mm High Body
• Requires a 20-22mm Diameter hole in the glass
• Install using M12 Threaded Rod into masonry
• Install using M12 Metric to Lag Screw into timber
• Kit includes: Cap, Body, 2 x Plastic Washers and 1 x Bush
• For Face Mount Glass Balustrade / Pool Fence

M12 Fixing sold separately

50mm Diameter Adjustable Body Standoff for Face Mount Glass Balustrade / Pool Fence

• 50mm Diameter
• Adjusts between 23 and 40mm
• Ideal for fixing to an uneven surface
• Requires a 20-22mm Diameter hole in the glass
• Install using M12 Threaded Rod for masonry
• Install using M12 Metric to Lag Screw for timber
• Kit includes: Cap, Body, 2 x Plastic Washers and 1 x Bush
• For Face Mount Glass Balustrade / Pool Fence

1150x1280 x 15mm Glass With 6 x Bottom Holes for Standoffs

• Width: 1150mm
• Height: 1280mm
• Thickness: 15mm
• 6 x 22mm holes for Standoffs

Suitable for installation with:

• Glass Standoffs
• Top Mount Rail

Glass is certified to Australian Standards
Toughened and Heat Soaked Glass with Polished Edges

1600 x 1200 x 12mm Glass Pool Fence Hinge Panel

Glass Gate Hinge Panel. Used to swing a glass gate off.

• Width: 1600mm
• Height: 1200mm
• Thickness: 12mm
• Weight: 58kg
• Holes: 4 x 14mm Holes to fix glass gate hinges

Suitable for installation with:

• Friction Spigots
• Deck Mount Channel

Used for:

• Glass Pool Fencing

It can be installed with a Top Mounted Rail

Glass is certified to Australian Standards

Square Recessed Matt Black Shower Screen Door Knob

• Square Recessed Shape Knob for Shower Screen Door
• Matt Black Finish
• Double pull knob
• Suits 8mm, 10mm and 12mm thick glass
• Requires a 12mm hole in the glass
• Made from Solid Brass
• Nylon spacers and gaskets included to prevent glass/metal contact

Round Glass to Wall Adjustable Horizontal Support Arm - Chrome Plated - For Shower Screen

Used to stiffen and brace a Return/Fixed panel by connecting it to the adjacent wall.

• Adjacent Wall to Glass support arm
• Adjustable length by cutting the tube to the required length.
• Maximum width of 1200mm
• Hidden fixing wall installation for a neat finish.
• Suitable for 8 and 10mm thick glass
• Compression/friction screws secure to the glass. No holes in glass required
• Made from Brass with Stainless Steel Tube

972(w)x2050(h)x10mm Glass Shower Screen Return/Fixed Panel

This panel can be used as a return panel when installing a corner shower or a fixed panel when installing a single panel screen.

• Width: 972mm
• Height: 2050mm
• Thickness: 10mm
• Weight: 50kg
• Allow a 3mm Gap between this panel and the door.

Installation Widths:

• 975mm when installing with a wall bracket
• 982-985mm when installing with 19mm U Channel
• 982-997mm when installing with 35mm U Channel

1200x1280 x 15mm Glass With 6 x Bottom Holes for Standoffs

• Width: 1200mm
• Height: 1280mm
• Thickness: 15mm
• 6 x 22mm holes for Standoffs

Suitable for installation with:

• Glass Standoffs
• Top Mount Rail

Glass is certified to Australian Standards
Toughened and Heat Soaked Glass with Polished Edges

40mm Square Cap x 30mm Body Standoff for Face Mount Glass Balustrade / Pool Fence

• 40mm Square Cap
• 30mm High Body
• Requires a 20-22mm Diameter hole in the glass
• Install using M12 Threaded Rod for Masonry
• Install using M12 Metric to Lag Screw for timber
• Kit includes: Cap, Body, 2 x Plastic Washers and 1 x Bush
• For Face Mount Glass Balustrade / Pool Fence

M12 Fixing rods sold separately

997(w)x2050(h)x10mm Glass Shower Screen Return/Fixed Panel

This panel can be used as a return panel when installing a corner shower or a fixed panel when installing a single panel screen.

• Width: 997mm
• Height: 2050mm
• Thickness: 10mm
• Weight: 51kg
• Allow a 3mm Gap between the wall and glass and a 3mm Gap between this panel and the door.

Installation Widths:

• 1000mm when installing with a wall bracket
• 1007-1010mm when installing with 19mm U Channel
• 1007-1022mm when installing with 35mm U Channel

Round Matt Black Shower Screen Door Knob

• Round with finger notch Knob for Shower Screen Door
• Matt Black Finish
• Double pull knob
• Suits 8mm, 10mm and 12mm thick glass
• Requires a 12mm Hole in the Glass
• Made from Solid Brass
• Nylon spacers and gaskets included to prevent glass/metal contact

38mm Diameter Round Offset Fixed Bracket - Suits Round and Flat Rails

• 38mm Diameter Round Cap
• Suits round or flat rails
• Includes 3 Saddles 38mm, 50mm and Flat. You can simply change the saddle to use with different profile handrails.

• Requires a 20mm Diameter Hole in the glass

1700 x 1200 x 12mm Glass Pool Fence Hinge Panel

Glass Gate Hinge Panel. Used to swing a glass gate off.

• Width: 1700mm
• Height: 1200mm
• Thickness: 12mm
• Weight: 61kg
• Holes: 4 x 14mm Holes to fix glass gate hinges

Suitable for installation with:

• Friction Spigots
• Deck Mount Channel

Used for:

• Glass Pool Fencing

It can be installed with a Top Mounted Rail

Glass is certified to Australian Standards

Standoff Tool

• Tighten and loosen 38mm and 50mm diameter standoffs
• Made from 316 Stainless Steel

1800 x 1200 x 12mm Glass Pool Fence Hinge Panel

Glass Gate Hinge Panel. Used to swing a glass gate off.

• Width: 1800mm
• Height: 1200mm
• Thickness: 12mm
• Weight: 65kg
• Holes: 4 x 14mm Holes to fix glass gate hinges

Suitable for installation with:

• Friction Spigots
• Deck Mount Channel

Used for:

• Glass Pool Fencing

It can be installed with a Top Mounted Rail

Glass is certified to Australian Standards

Square Chrome Shower Screen Door Handle

• Square D Handle Shower Screen Door Handle
• Stainless steel in a mirror finish
• Back to back pull handles
• Suits 8mm, 10mm and 12mm thick glass
• Requires 2 x 12mm holes at 155mm centres
• Nylon spacers and gaskets included to prevent glass/metal contact

Round Recessed Matt Black Shower Screen Door Knob

• Round Recessed Knob for Shower Screen Door
• Matt Black Finish
• Double pull knob
• Suits 8mm, 10mm and 12mm thick glass
• Requires a 12mm hole in the glass
• Made from Solid Brass
• Nylon spacers and gaskets included to prevent glass/metal contact

1022(w)x2050(h)x10mm Glass Shower Screen Return/Fixed Panel

This panel can be used as a return panel when installing a corner shower or a fixed panel when installing a single panel screen.

• Width: 1022mm
• Height: 2050mm
• Thickness: 10mm
• Weight: 52kg
• Allow a 3mm Gap between this panel and the door.

When installed using Wall Brackets:

Installation Widths:

• 1025mm when installing with a wall bracket
• 1032-1035mm when installing with 19mm U Channel
• 1032-1047mm when installing with 35mm U Channel

M12 x 120mm Threaded Rod

• M12 Heavy Duty
• 120mm overall length
• Allows installation into concrete by using a chemical anchor
• Allows installation through steel using an M12 nut or tapped thread
• Suits all standoffs

1047(w)x2050(h)x10mm Glass Shower Screen Return/Fixed Panel

This panel can be used as a return panel when installing a corner shower or a fixed panel when installing a single panel screen.

• Width: 1047mm
• Height: 2050mm
• Thickness: 10mm
• Weight: 54kg
• Allow a 3mm Gap between the wall and glass and a 3mm Gap between this panel and the door.

Installation Widths:

• 1050mm when installing with a wall bracket
• 1057-1060mm when installing with 19mm U Channel
• 1057-1072mm when installing with 35mm U Channel

Round D Chrome Shower Screen Door Handle

• Round D Handle Shower Screen Door Handle
• Stainless steel in a mirror finish
• Pull Knob on inside of Door Panel and D Handle on the outside
• Suits 8mm, 10mm and 12mm thick glass
• Requires 2 x 12mm holes at 155mm centres
• Nylon spacers and gaskets included to prevent glass/metal contact

M12 x 1000mm Threaded Rod

• M12 Heavy Duty
• 1000mm overall length
• Allows installation into concrete by using a chemical anchor
• Allows installation through steel using an M12 nut or tapped thread
• Suits all standoffs

1097(w)x2050(h)x10mm Glass Shower Screen Return/Fixed Panel

This panel can be used as a return panel when installing a corner shower or a fixed panel when installing a single panel screen.

• Width: 1097mm
• Height: 2050mm
• Thickness: 10mm
• Weight: 57kg
• Allow a 3mm Gap between the wall and glass and a 3mm Gap between this panel and the door.

Installation Widths:

• 1100mm when installing with a wall bracket
• 1107-1110mm when installing with 19mm U Channel
• 1107-1122mm when installing with 35mm U Channel

Square L Shape Chrome Shower Screen Door Knob

• Square L Shape Knob for Shower Screen Door
• Chrome Plate Finish
• Double pull knob
• Suits 8mm, 10mm and 12mm thick glass
• Requires a 12mm hole in the door
• Made from Solid Brass
• Nylon spacers and gaskets included to prevent glass/metal contact

115mm Lag Screw to Metric Thread

• M12 Heavy Duty Screw
• 115mm overall length
• Allows installation into timber or composite material
• Suits all standoffs
• Hex drive allen head.

1147(w)x2050(h)x10mm Glass Shower Screen Return/Fixed Panel

This panel can be used as a return panel when installing a corner shower or a fixed panel when installing a single panel screen.

• Width: 1147mm
• Height: 2050mm
• Thickness: 10mm
• Weight: 59kg
• Allow a 3mm Gap between the wall and glass and a 3mm Gap between this panel and the door.

Installation Widths:

• 1150mm when installing with a wall bracket
• 1157-1160mm when installing with 19mm U Channel
• 1157-1172mm when installing with 35mm U Channel

Square Recessed Chrome Shower Screen Door Knob

• Square Recessed Shape Knob for Shower Screen Door
• Chrome Plated Finish
• Double pull knob
• Suits 8mm, 10mm and 12mm thick glass
• Requires a 12mm hole in the door
• Made from Solid Brass
• Nylon spacers and gaskets included to prevent glass/metal contact

160mm Lag Screw to Metric Thread

• M12 Heavy Duty Screw
• 160mm overall length
• Allows installation into timber or composite material
• Suits all standoffs
• Hex drive allen head.

1197(w)x2050(h)x10mm Glass Shower Screen Return/Fixed Panel

This panel can be used as a return panel when installing a corner shower or a fixed panel when installing a single panel screen.

• Width: 1197mm
• Height: 2050mm
• Thickness: 10mm
• Weight: 61kg
• Allow a 3mm Gap between the wall and glass and a 3mm Gap between this panel and the door.

Installation Widths:

• 1200mm when installing with a wall bracket
• 1207-1210mm when installing with 19mm U Channel
• 1207-1222mm when installing with 35mm U Channel

Slimline Round Chrome Shower Screen Door Knob

• Slimline 25mm Diameter Round Knob for Glass Shower Screen Door
• Chrome Plated Finish
• Double pull knob
• Suits 6mm, 8mm, 10mm and 12mm thick glass
• Requires a 12mm hole in the door
• Made from Solid Brass
• Nylon spacers and gaskets included to prevent glass/metal contact

1297(w)x2050(h)x10mm Glass Shower Screen Return/Fixed Panel

This panel can be used as a return panel when installing a corner shower or a fixed panel when installing a single panel screen.

• Width: 1297mm
• Height: 2050mm
• Thickness: 10mm
• Weight: 67kg
• Allow a 3mm Gap between the wall and glass and a 3mm Gap between this panel and the door.

Installation Widths:

• 1300mm when installing with a wall bracket
• 1307-1310mm when installing with 19mm U Channel
• 1307-1322mm when installing with 35mm U Channel

Round Chrome Shower Screen Door Knob

• Round with finger notch Knob for Glass Shower Screen Door
• Chrome Plated Finish
• Double pull knob
• Suits 8mm, 10mm and 12mm thick glass
• Requires a 12mm hole in the door
• Made from Solid Brass
• Nylon spacers and gaskets included to prevent glass/metal contact

1397(w)x2050(h)x10mm Glass Shower Screen Return/Fixed Panel

This panel can be used as a return panel when installing a corner shower or a fixed panel when installing a single panel screen.

• Width: 1397mm
• Height: 2050mm
• Thickness: 10mm
• Weight: 72kg
• Allow a 3mm Gap between the wall and glass and a 3mm Gap between this panel and the door.

Installation Widths:

• 1400mm when installing with a wall bracket
• 1407-1410mm when installing with 19mm U Channel
• 1407-1422mm when installing with 35mm U Channel

Round Recessed Chrome Shower Screen Door Knob

• Round Recessed Knob for Glass Shower Screen Door
• Chrome Plated
• Double pull knob
• Suits 8mm, 10mm and 12mm thick glass
• Requires a 12mm hole in the door
• Made from Solid Brass
• Nylon spacers and gaskets included to prevent glass/metal contact

35mm Deep 2100mm Long Chrome Shower Screen Aluminium U Channel

• 35mm Deep Anodised Aluminium Channel
• Adds 10mm to 25mm to the overall glass width
• High Polished Chrome Look Finish
• Dry Glaze System - No need for silicon in glass
• Suits 10mm Glass
• Consider using where the wall is out of square (up to 15mm) or where a slimline channel looks is desired
• Unique Aluminium extrusion has internal ribs which hold secure 2part Clear Glazing PVC
• Fast Installation
• U-Channel & 2 Part Glazing PVC Included

50mm Diameter Round Offset Fixed Bracket - Suits round and Flat Rails

• 50mm Diameter Round Cap
• Suits round or flat rails
• Includes 3 Saddles 38mm, 50mm and Flat. You can simply change the saddle to use with different profile handrails.
• Requires a 20mm Diameter Hole in the Glass