Black Glass to Glass - 90 Degree Corner - Glass Brace for Stiffening Glass Pool Fences

Used as a rigidity brace on a glass pool fence or glass balustrade.

• Black Glass to Glass at a 90 Degree Corner
• Use for Stiffening Glass Pool Fences
• Suitable for 12mm Glass
• Friction fixed so not holes in glass required.
• Made from Powder Coated solid 316 Grade Stainless

Black Glass to Wall - Glass Brace for Stiffening Glass Pool Fences

Used as a rigidity brace on a glass pool fence or glass balustrade.

• Black Glass to Wall/Post
• Use for Stiffening Glass Pool Fences
• Suitable for 12mm Glass
• Friction fixed so not holes in glass required.
• Made from Powder Coated solid 316 Grade Stainless
• 2 screws required (sold separately)

Black Glass to Glass - Straight - Large - Glass Brace for Stiffening Glass Pool Fences

Used as a rigidity brace on a glass pool fence or glass balustrade.

• Black Glass to Glass in a Straight Line
• Use for Stiffening Glass Pool Fences
• Suitable for 12mm Glass
• 140mm Long x 25mm Wide
• Minimum gap between glass panels is 20mm
• Maximum gap between glass panels is 95mm
• Friction fixed so not holes in glass required.
• Made from Powder Coated solid 316 Grade Stainless

Black Glass to Glass - Straight - Small - Glass Brace for Stiffening Glass Pool Fences

Used as a rigidity brace on a glass pool fence or glass balustrade.

• Black Glass to Glass in a Straight Line
• Use for Stiffening Glass Pool Fences
• Suitable for 12mm Glass
• 75mm Long x 25mm Wide
• Minimum gap between glass panels is 20mm
• Maximum gap between glass panels is 50mm
• Friction fixed so not holes in glass required.
• Made from Powder Coated solid 316 Grade Stainless

Black Glass to Glass - Swivel - Glass Brace for Stiffening Glass Pool Fences

Used as a rigidity brace on a glass pool fence or glass balustrade.

• Black Glass to Glass at an odd angle Corner
• Use for Stiffening Glass Pool Fences
• Suitable for 12mm Glass
• Friction fixed so not holes in glass required.
• Made from Powder Coated solid 316 Grade Stainless

Matt Black 25x21mm 5800mm Long Slotted Rectangle Tube for Glass Balustrade / Pool Fence Top Rail

• Black Powder Coated 316 grade Stainless Steel
• Use for Glass Balustrade or Glass Pool Fence Top Rail
• Fits directly onto the top of the glass
• 316 grade Stainless Steel
• 14x14mm Slot
• Install with glazing rubber or silicon directly to the glass

Matt Black 25x21mm Wall Plate for Glass Balustrade / Pool Fence Top Rail

• Used to attach rail to flat post or wall
• Use for Glass Balustrade or Glass Pool Fence Top Rail
• Powder Coated 316 grade Stainless Steel
• Fit by Welding or epoxy glue

Matt Black 25x21mm End Cap for Glass Balustrade / Pool Fence Top Rail

• Powder Coated 316 grade Stainless Steel
• Use for Glass Balustrade or Glass Pool Fence Top Rail
• Fit by Welding or epoxy glue

Black Square Front, Flat Back Glass Clamp for Glass Balustrade / Pool Fence

Black, Square Front, Flat Back Glass Clamp

• Flat back for installation onto timber or steel post or brick wall
• Use for Glass Balustrade / Pool Fence
• Suitable for 8, 10 and 12mm Glass - Gaskets provided
• Black Powder Coated 316 Marine Grade Stainless Steel

Black Glass to Wall - Offset Wall Clamp

Used for glass to wall or post bracing.

• Friction fit
• Brace glass to posts and walls
• Suitable for 12mm Glass
• Retrofit to existing glass
• Easy to install with offset hole to the side of the glass

Glass to Wall - Offset Wall Clamp

Stainless Steel Offset wall clamp used for glass to wall or post bracing.

• Friction fit
• Brace glass to posts and walls
• Suitable for 12mm Glass
• Retrofit to existing glass
• Easy to install with offset hole to the side of the glass

Matt Black 25x21mm Extended Wall Plate for Glass Balustrade / Pool Fence Top Rail

• Black Powder Coated 316 grade Stainless Steel
• Extened Wall Plate for use with Face Mount Glass Balustrade
• Used to attach rail to flat post or wall
• Use for Glass Balustrade or Glass Pool Fence Top Rail
• Fit by Welding or epoxy glue

Matt Black 25x21mm Adjustable Vertical Joiner for Glass Balustrade / Pool Fence Top Rail

• Black Powder Coated 316 grade Stainless Steel
• Joins 25x21mm Slotted Tube at a change of Vertical Joiner (eg. Down Stairs)
• Use for Glass Balustrade or Glass Pool Fence Top Rail
• Fit by Welding or epoxy glue

Matt Black 25x21mm 90 Degree Vertical Joiner for Glass Balustrade / Pool Fence Top Rail

• Black Powder Coated 316 grade Stainless Steel
• allows you to run the rail down the side of the glass edge
• Fit by epoxy glue

Matt Black 25x21mm 90 Degree Joiner for Glass Balustrade / Pool Fence Top Rail

• Black Powder Coated 316 grade Stainless Steel
• Joins 25x21mm Slotted Tube at a 90 degree angle (on a corner)
• 316 grade Stainless Steel
• Fit by Welding or epoxy glue
• Available in Mirror or satin finish

Matt Black 25x21mm In-Line Joiner for Glass Balustrade / Pool Fence Top Rail

• Black Powder Coated 316 grade Stainless Steel
• Joins 2 straight lengths of 25x21mm Slotted Stainless Steel Tube
• Use for Glass Balustrade or Glass Pool Fence Top Rail
• 316 grade Stainless Steel
• Fit by Welding or epoxy glue
• Available in Mirror or satin finish

Matt Black 25x21mm Adjustable Horizontal Joiner for Glass Balustrade / Pool Fence Top Rail

• Black Powder Coated 316 grade Stainless Steel
• Joins 25x21mm Slotted Tube at a Corner that is not 90 degrees
• Use for Glass Balustrade or Glass Pool Fence Top Rail
• Fit by Welding or epoxy glue

Matt Black Glass to Glass Pool Fence Gate Hinge Set

• Matt Black Glass to Glass Gate Hinge
• Use for Glass Pool Fence Gate or Glass Balustrade Gate
• Suits 8 & 10mm Glass Gates
• Suits 12mm Hinge Panel
• 316 Grade Stainless powder coated backing plate
• Sold as a pair
• Gate needs to be drilled with 4 x 10mm Holes (24mm in from the side and 47 apart)
• Hinge panel needs to be drilled 4 x 14mm Holes (40mm in from the side and 60mm apart)
• For best results allow for a 16mm gap between the hinge panel and gate

Black Glass to Wall/Square Post Pool Fence Hinge Set

• Glass to Wall/Square Post
• Use for Glass Pool Fence or Glass Balustrade Gate
• Suits 8 & 10mm Glass Gates
• 316 Grade Stainless
• Gate needs to be drilled with 4 x 10mm Holes (24mm in from the side and 47 apart)
• You will need to allow for a gap of 22mm between the gate and post

25x21mm 90 Degree Vertical Joiner for Glass Balustrade / Pool Fence Top Rail

• 316 grade Stainless Steel
• Allows you to run the rail down the side of the glass edge
• 316 grade Stainless Steel
• Fit by epoxy glue

250x1200x12mm Toughened Pool Fence / Balustrade Panels with Polished Edges

• Width: 250mm
• Height: 1200mm
• Thickness: 12mm

Suitable for installation with:

• Friction Spigots
• Posts
• Deck Mount Channel
• Side Fix glass clamps

Used for:

• Glass Pool Fencing
• Face Mount Glass Balustrading

It can be installed with a Top Mounted Rail

Glass is certified to Australian Standards

350x1200x12mm Toughened Pool Fence / Balustrade Panels with Polished Edges

Glass is certified to Australian Standards

• Width: 350mm
• Height: 1200mm
• Thickness: 12mm

Suitable for installation with:

• Friction Spigots
• Posts
• Deck Mount Channel
• Side Fix glass clamps

Used for:

• Glass Pool Fencing
• Face Mount Glass Balustrading

It can be installed with a Top Mounted Rail

Wall Bracket - Brushed Brass / Gold - For Shower Screen

Used to fix Hinge and Return/Fixed panels to the wall.

3 Per Panel recommended

• Wall Bracket
• 3mm Gap between glass and wall
• Brushed Brass / Gold Finish
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• 2 x Compression/Friction screws
• No holes in glass required
• Made from solid brass
• 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

Offset Wall Bracket - Brushed Brass / Gold - For Shower Screen

Used to fix Hinge and Return/Fixed panels to the wall in a shower screen.

3 Per Panel recommended

These are easier to install then the hidden screw wall bracket. The screw can be marked and installed with the glass standing in place.

• Offset Wall Bracket for Shower Screens
• Brushed Gold Finish
• 3mm Gap between glass and wall
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• 2 x Compression/Friction screws
• No holes in glass required
• Made from solid brass
• 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used.

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

135 Degree Glass to Glass Brushed Brass / Gold Shower Screen Door Hinge

2 required per door

• 135 Degree Glass to Glass Hinge
• Brushed Brass / Gold Finish
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards
• Made from solid brass

Custom Mitre cut glass required for Hinge Panel

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

Offset Wall to Glass Brushed Brass / Gold Shower Screen Door Hinge

2 required per door

• Brushed Brass / Gold Finish
• Offset Wall to Glass Hinge
• 3 x Fixing Holes
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards
• Made from solid brass
• Fixing Screws included
• Allen Key & Gaskets included

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

Wall to Glass Brushed Brass / Gold Shower Screen Door Hinge

2 required per door

• Wall to Glass Hinge
• Brushed Brass / Gold Finish
• 4 x Fixing Holes
• Allow 9mm gap between Wall and Glass
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards
• Made from solid brass
• Fixing Screws included
• Allen Key & Gaskets included

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

Glass to Glass Brushed Brass / Gold Shower Screen Door Hinge

2 required per door

• Glass to Glass Hinge
• Brushed Brass / Gold Finish
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards (90 Degrees inwards and Outwards)
• Will hold door at 90 degrees inwards, 90 Degree Outwards and 180 Degrees closed.
• Made from solid brass
• Allen Key & Gaskets included

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

19mm Wide 2100mm Long Brushed Brass / Gold Shower Screen Aluminium U Channel

• 19mm Slimline Anodised Aluminium Channel
• Adds 8mm to the overall glass width
• Brushed Brass / Gold Finish
• Dry Glaze System - No need for silicon in glass
• Suits 10mm Glass
• Consider using where the wall is out of square (up to 6mm) or where a slimline channel looks is desired
• Unique Aluminium extrusion has internal ribs which hold secure 2part Clear Glazing PVC
• Fast Installation
• U-Channel & 2 Part Glazing PVC Included

35mm Deep 2100mm Long Brushed Brass / Gold Shower Screen Aluminium U Channel

• 35mm Deep Anodised Aluminium Channel
• Adds 10mm to 25mm to the overall glass width
• Brushed Gold Finish
• Dry Glaze System - No need for silicon in glass
• Suits 10mm Glass
• Consider using where the wall is out of square (up to 15mm) or where a slimline channel looks is desired
• Unique Aluminium extrusion has internal ribs which hold secure 2part Clear Glazing PVC
• Fast Installation
• U-Channel & 2 Part Glazing PVC Included

Large Glass Brace Bracket - Brushed Brass / Gold - For Shower Screen

Used to stiffen and brace a return or hinge panel by fixing a brace panel along the top and tying them together.

Can also be used to tie a Fixed panel back to the wall.

• Small Glass Brace Bracket
• Square Finish Edges
• Brace 8mm thick glass hood to 10mm thick return & hinge panels
• 4 x compression/friction screws
• Sturdy design
• No holes required in glass

Tip: Place bracket ensuring glass door does not hit when swinging inwards.

Small Glass Brace Bracket - Brushed Brass / Gold - For Shower Screen

Used to stiffen and brace a return or hinge panel by fixing a brace panel along the top and tying them together.

Can also be used to tie a Fixed panel back to the wall.

• Small Glass Brace Bracket
• Square Finish Edges
• Brace 8mm thick glass hood to 10mm thick return & hinge panels
• 2 x compression/friction screws
• Slimline Design
• No holes required in glass

Tip: Place bracket ensuring glass door does not hit when swinging inwards.

Glass to Wall Adjustable Horizontal Support Arm - Brushed Brass / Gold - For Shower Screen

Used to stiffen and brace a Return/Fixed panel by connecting it to the adjacent wall.

• Adjacent Wall to Glass support arm
• Adjustable length by cutting the tube to the required length.
• Maximum width of 1200mm
• Hidden fixing wall installation for a neat finish.
• Suitable for 8 and 10mm thick glass
• Compression/friction screws secure to the glass. No holes in glass required

Glass to Back Wall Brace Bracket - Brushed Brass / Gold - For Shower Screen

Used to stiffen and brace a Return/Fixed panel by tying it to the wall.

• Back Wall to Glass support arm
• Double adjustability for easy installation. Adjustable at wall & at glass
• Hidden fixing wall installation for a neat finish.
• Suitable for 8 and 10mm thick glass
• Compression/friction screws secure to the glass. No holes in glass required

Round Slimline Brushed Brass / Gold Shower Screen Door Knob

• Round Knob for Glass Shower Screen Door
• Brushed Brass / Gold Finish
• Double pull knob
• Suits 8mm, 10mm and 12mm thick glass
• Requires a 12mm hole in the door
• Made from Solid Brass
• Nylon spacers and gaskets included to prevent glass/metal contact

Matt White Round Glass Shower Screen Door Knob

• Round Knob for Glass Shower Screen Door
• Matt White Finish
• Double pull knob
• Suits 8mm, 10mm and 12mm thick glass
• Requires a 12mm hole in the door
• Made from Solid Brass
• Nylon spacers and gaskets included to prevent glass/metal contact

Matt White Glass to Back Wall Brace Bracket

Used to stiffen and brace a Return/Fixed panel by tying it to the wall.

• Back Wall to Glass support arm
• Double adjustability for easy installation. Adjustable at wall & at glass
• Hidden fixing wall installation for a neat finish.
• Suitable for 8 and 10mm thick glass
• Compression/friction screws secure to the glass. No holes in glass required

Matt White Glass to Wall Adjustable Horizontal Glass Shower Screen Support Arm

Used to stiffen and brace a Return/Fixed panel by connecting it to the adjacent wall.

• Adjacent Wall to Glass support arm
• Adjustable length by cutting the tube to the required length.
• Maximum width of 1200mm
• Hidden fixing wall installation for a neat finish.
• Suitable for 8 and 10mm thick glass
• Compression/friction screws secure to the glass. No holes in glass required

Matt White Small Glass Brace Bracket

Used to stiffen and brace a return or hinge panel by fixing a brace panel along the top and tying them together.

Can also be used to tie a Fixed panel back to the wall.

• Small Glass Brace Bracket
• Square Finish Edges
• Brace 8mm thick glass hood to 10mm thick return & hinge panels
• 2 x compression/friction screws
• Slimline Design
• No holes required in glass

Tip: Place bracket ensuring glass door does not hit when swinging inwards.

Matt White Large Glass Brace Bracket

Used to stiffen and brace a return or hinge panel by fixing a brace panel along the top and tying them together.

Can also be used to tie a Fixed panel back to the wall.

• Small Glass Brace Bracket
• Square Finish Edges
• Brace 8mm thick glass hood to 10mm thick return & hinge panels
• 4 x compression/friction screws
• Sturdy design
• No holes required in glass

Tip: Place bracket ensuring glass door does not hit when swinging inwards.

Matt White 35mm Deep 2100mm Long Shower Screen Wall Channel

• 35mm Deep Aluminium Channel
• Adds 10mm to 25mm to the overall glass width
• Matt White Finish
• Dry Glaze System - No need for silicon in glass
• Suits 10mm Glass
• Consider using where the wall is out of square (up to 15mm) or where a slimline channel looks is desired
• Unique Aluminium extrusion has internal ribs which hold secure 2part Clear Glazing PVC
• Fast Installation
• U-Channel & 2 Part Glazing PVC Included

Matt White 19mm Deep 2100mm Long Shower Screen Wall Channel

• 19mm Slimline Aluminium Channel
• Adds 8mm to the overall glass width
• Matt White Finish
• Dry Glaze System - No need for silicon in glass
• Suits 10mm Glass
• Consider using where the wall is out of square (up to 6mm) or where a slimline channel looks is desired
• Unique Aluminium extrusion has internal ribs which hold secure 2part Clear Glazing PVC
• Fast Installation
• U-Channel & 2 Part Glazing PVC Included

Matt White Glass to Glass Shower Screen Door Hinge

2 required per door

• Glass to Glass Hinge
• Matt White Finish
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards (90 Degrees inwards and Outwards)
• Will hold door at 90 degrees inwards, 90 Degree Outwards and 180 Degrees closed.
• Made from solid brass
• Allen Key & Gaskets included

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

Matt White Wall to Glass Shower Screen Door Hinge

2 required per door

• Wall to Glass Hinge
• Matt White Finish
• 4 x Fixing Holes
• Allow 9mm gap between Wall and Glass
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards
• Made from solid brass
• Fixing Screws included
• Allen Key & Gaskets included

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

Matt White Glass Shower Screen Offset Wall to Glass Door Hinge

2 required per door

• Matt White Finish
• Offset Wall to Glass Hinge
• 3 x Fixing Holes
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards
• Made from solid brass
• Fixing Screws included
• Allen Key & Gaskets included

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

Matt White Glass Shower Screen 135 Degree Door Hinge

2 required per door

• 135 Degree Glass to Glass Hinge
• Matt White Finish
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards
• Made from solid brass

Custom Mitre cut glass required for Hinge Panel

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

Matt White Glass Shower Screen Offset Wall Bracket

Used to fix Hinge and Return/Fixed panels to the wall in a shower screen.

3 Per Panel recommended

These are easier to install then the hidden screw wall bracket. The screw can be marked and installed with the glass standing in place.

• Offset Wall Bracket for Shower Screens
• Matt White Finish
• 3mm Gap between glass and wall
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• 2 x Compression/Friction screws
• No holes in glass required
• Made from solid brass
• 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used.

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

Matt White Glass Shower Screen Wall Bracket

Used to fix Hinge and Return/Fixed panels to the wall.

3 Per Panel recommended

• Wall Bracket
• 3mm Gap between glass and wall
• Matt White Finish
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• 2 x Compression/Friction screws
• No holes in glass required
• Made from solid brass
• 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

Gunmetal Grey Glass Shower Screen Wall Bracket

Used to fix Hinge and Return/Fixed panels to the wall.

3 Per Panel recommended

• Wall Bracket
• 3mm Gap between glass and wall
• Gunmetal Grey Finish
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• 2 x Compression/Friction screws
• No holes in glass required
• Made from solid brass
• 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

Gunmetal Grey Glass Shower Screen Offset Wall Bracket

Used to fix Hinge and Return/Fixed panels to the wall in a shower screen.

3 Per Panel recommended

These are easier to install then the hidden screw wall bracket. The screw can be marked and installed with the glass standing in place.

• Offset Wall Bracket for Shower Screens
• Gunmetal Grey Finish
• 3mm Gap between glass and wall
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• 2 x Compression/Friction screws
• No holes in glass required
• Made from solid brass
• 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used.

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

Gunmetal Grey Glass Shower Screen 135 Degree Door Hinge

2 required per door

• 135 Degree Glass to Glass Hinge
• Gunmetal Grey Finish
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards
• Made from solid brass

Custom Mitre cut glass required for Hinge Panel

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

Gunmetal Grey Glass Shower Screen Offset Wall to Glass Door Hinge

2 required per door

• Gunmetal Grey Finish
• Offset Wall to Glass Hinge
• 3 x Fixing Holes
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards
• Made from solid brass
• Fixing Screws included
• Allen Key & Gaskets included

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

Gunmetal Grey Wall to Glass Shower Screen Door Hinge

2 required per door

• Wall to Glass Hinge
• Gunmetal Grey Finish
• 4 x Fixing Holes
• Allow 9mm gap between Wall and Glass
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards
• Made from solid brass
• Fixing Screws included
• Allen Key & Gaskets included

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

Gunmetal Grey Glass to Glass Shower Screen Door Hinge

2 required per door

• Glass to Glass Hinge
• Gunmetal Grey Finish
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards (90 Degrees inwards and Outwards)
• Will hold door at 90 degrees inwards, 90 Degree Outwards and 180 Degrees closed.
• Made from solid brass
• Allen Key & Gaskets included

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

Gunmetal Grey Large Glass Brace Bracket

Used to stiffen and brace a return or hinge panel by fixing a brace panel along the top and tying them together.

Can also be used to tie a Fixed panel back to the wall.

• Small Glass Brace Bracket
• Square Finish Edges
• Brace 8mm thick glass hood to 10mm thick return & hinge panels
• 4 x compression/friction screws
• Sturdy design
• No holes required in glass

Tip: Place bracket ensuring glass door does not hit when swinging inwards.

Gunmetal Grey Small Glass Brace Bracket

Used to stiffen and brace a return or hinge panel by fixing a brace panel along the top and tying them together.

Can also be used to tie a Fixed panel back to the wall.

• Small Glass Brace Bracket
• Square Finish Edges
• Brace 8mm thick glass hood to 10mm thick return & hinge panels
• 2 x compression/friction screws
• Slimline Design
• No holes required in glass

Tip: Place bracket ensuring glass door does not hit when swinging inwards.

Gunmetal Grey Glass to Wall Adjustable Horizontal Glass Shower Screen Support Arm

Used to stiffen and brace a Return/Fixed panel by connecting it to the adjacent wall.

• Adjacent Wall to Glass support arm
• Adjustable length by cutting the tube to the required length.
• Maximum width of 1200mm
• Hidden fixing wall installation for a neat finish.
• Suitable for 8 and 10mm thick glass
• Compression/friction screws secure to the glass. No holes in glass required

Gunmetal Grey Glass to Back Wall Brace Bracket

Used to stiffen and brace a Return/Fixed panel by tying it to the wall.

• Back Wall to Glass support arm
• Double adjustability for easy installation. Adjustable at wall & at glass
• Hidden fixing wall installation for a neat finish.
• Suitable for 8 and 10mm thick glass
• Compression/friction screws secure to the glass. No holes in glass required

Gunmetal Grey Round Glass Shower Screen Door Knob

• Round Knob for Glass Shower Screen Door
• Gunmetal Grey Finish
• Double pull knob
• Suits 8mm, 10mm and 12mm thick glass
• Requires a 12mm hole in the door
• Made from Solid Brass
• Nylon spacers and gaskets included to prevent glass/metal contact

Brushed Nickel Glass Shower Screen Wall Bracket

Used to fix Hinge and Return/Fixed panels to the wall.

3 Per Panel recommended

• Wall Bracket
• 3mm Gap between glass and wall
• Brushed Nickel Finish
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• 2 x Compression/Friction screws
• No holes in glass required
• Made from solid brass
• 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

Brushed Nickel Glass Shower Screen Offset Wall Bracket

Used to fix Hinge and Return/Fixed panels to the wall in a shower screen.

3 Per Panel recommended

These are easier to install then the hidden screw wall bracket. The screw can be marked and installed with the glass standing in place.

• Offset Wall Bracket for Shower Screens
• Brushed Nickel Finish
• 3mm Gap between glass and wall
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• 2 x Compression/Friction screws
• No holes in glass required
• Made from solid brass
• 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used.

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

Brushed Nickel Glass Shower Screen 135 Degree Door Hinge

2 required per door

• 135 Degree Glass to Glass Hinge
• Brushed Nickel Finish
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards
• Made from solid brass

Custom Mitre cut glass required for Hinge Panel

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

Brushed Nickel Glass Shower Screen Offset Wall to Glass Door Hinge

2 required per door

• Brushed Nickel Finish
• Offset Wall to Glass Hinge
• 3 x Fixing Holes
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards
• Made from solid brass
• Fixing Screws included
• Allen Key & Gaskets included

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

Brushed Nickel Wall to Glass Shower Screen Door Hinge

2 required per door

• Wall to Glass Hinge
• Brushed Nickel Finish
• 4 x Fixing Holes
• Allow 9mm gap between Wall and Glass
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards
• Made from solid brass
• Fixing Screws included
• Allen Key & Gaskets included

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

Brushed Nickel Glass to Glass Shower Screen Door Hinge

2 required per door

• Glass to Glass Hinge
• Brushed Nickel Finish
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards (90 Degrees inwards and Outwards)
• Will hold door at 90 degrees inwards, 90 Degree Outwards and 180 Degrees closed.
• Made from solid brass
• Allen Key & Gaskets included

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

Brushed Nickel 19mm Deep 2100mm Long Shower Screen Wall Channel

• 19mm Slimline Aluminium Channel
• Adds 8mm to the overall glass width
• Matt White Finish
• Dry Glaze System - No need for silicon in glass
• Suits 10mm Glass
• Consider using where the wall is out of square (up to 6mm) or where a slimline channel looks is desired
• Unique Aluminium extrusion has internal ribs which hold secure 2part Clear Glazing PVC
• Fast Installation
• U-Channel & 2 Part Glazing PVC Included

Brushed Nickel 35mm Deep 2100mm Long Shower Screen Wall Channel

• 35mm Deep Aluminium Channel
• Adds 10mm to 25mm to the overall glass width
• Brushed Nickel Finish
• Dry Glaze System - No need for silicon in glass
• Suits 10mm Glass
• Consider using where the wall is out of square (up to 15mm) or where a slimline channel looks is desired
• Unique Aluminium extrusion has internal ribs which hold secure 2part Clear Glazing PVC
• Fast Installation
• U-Channel & 2 Part Glazing PVC Included

Brushed Nickel Large Glass Brace Bracket

Used to stiffen and brace a return or hinge panel by fixing a brace panel along the top and tying them together.

Can also be used to tie a Fixed panel back to the wall.

• Small Glass Brace Bracket
• Square Finish Edges
• Brace 8mm thick glass hood to 10mm thick return & hinge panels
• 4 x compression/friction screws
• Sturdy design
• No holes required in glass

Tip: Place bracket ensuring glass door does not hit when swinging inwards.

Brushed Nickel Small Glass Brace Bracket

Used to stiffen and brace a return or hinge panel by fixing a brace panel along the top and tying them together.

Can also be used to tie a Fixed panel back to the wall.

• Small Glass Brace Bracket
• Square Finish Edges
• Brace 8mm thick glass hood to 10mm thick return & hinge panels
• 2 x compression/friction screws
• Slimline Design
• No holes required in glass

Tip: Place bracket ensuring glass door does not hit when swinging inwards.

Brushed Nickel Glass to Wall Adjustable Horizontal Glass Shower Screen Support Arm

Used to stiffen and brace a Return/Fixed panel by connecting it to the adjacent wall.

• Adjacent Wall to Glass support arm
• Adjustable length by cutting the tube to the required length.
• Maximum width of 1200mm
• Hidden fixing wall installation for a neat finish.
• Suitable for 8 and 10mm thick glass
• Compression/friction screws secure to the glass. No holes in glass required

Brushed Nickel Glass to Back Wall Brace Bracket

Used to stiffen and brace a Return/Fixed panel by tying it to the wall.

• Back Wall to Glass support arm
• Double adjustability for easy installation. Adjustable at wall & at glass
• Hidden fixing wall installation for a neat finish.
• Suitable for 8 and 10mm thick glass
• Compression/friction screws secure to the glass. No holes in glass required

Brushed Nickel Round Glass Shower Screen Door Knob

• Round Knob for Glass Shower Screen Door
• Brushed Nickel Finish
• Double pull knob
• Suits 8mm, 10mm and 12mm thick glass
• Requires a 12mm hole in the door
• Made from Solid Brass
• Nylon spacers and gaskets included to prevent glass/metal contact

Round Wall Bracket - Chrome Plated - For Shower Screen

Used to fix Hinge and Return/Fixed panels to the wall.

3 Per Panel recommended

• Round Wall Bracket
• 2.5mm Gap between glass and wall
• Chrome Plated Finish
• Slimline half round profile
• Suitable for 8mm & 10mm Glass
• 1 x Compression/Friction screws
• No holes in glass required
• Made from solid brass
• 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

Square Adjustable Glass to Wall Chrome Horizontal Support Arm - For Glass Shower Screen

Used to stiffen and brace a Return/Fixed panel by tying it to the wall.

• Wall to Glass support arm
• Chrome Finish
• Width Adjustable up to 1200mm - Simply cut the tube to the required width
• Hidden fixing wall installation for a neat finish.
• Suitable for 8 and 10mm thick glass
• Compression/friction screws secure to the glass. No holes in glass required

Face Mount Spigots - Stainless Steel

300x1000x15mm Toughened Glass Balustrade Panels with Polished edges

Toughened Glass Panel for Glass Balustrade

Glass is certified to Australian Standards

• Width: 300mm
• Height: 1000mm
• Thickness: 15mm
• Weight: 11kg
• Treatment: Toughened and Heat Soaked
• Edges: Polished all 4 sides

Suitable for installation with:

• 2 x Friction Spigots

400x1000x15mm Toughened Glass Balustrade Panels with Polished edges

Toughened Glass Panel for Glass Balustrade

Glass is certified to Australian Standards

• Width: 400mm
• Height: 1000mm
• Thickness: 15mm
• Weight: 15kg
• Treatment: Toughened and Heat Soaked
• Edges: Polished all 4 sides

Suitable for installation with:

• 2 x Friction Spigots

350x1000x15mm Toughened Glass Balustrade Panels with Polished edges

Toughened Glass Panel for Glass Balustrade

Glass is certified to Australian Standards

• Width: 350mm
• Height: 1000mm
• Thickness: 15mm
• Weight: 13kg
• Treatment: Toughened and Heat Soaked
• Edges: Polished all 4 sides

Suitable for installation with:

• 2 x Friction Spigots

1400x1000x15mm Toughened Glass Balustrade Panel with Polished edges

Toughened Glass Panel for Glass Balustrade

Glass is certified to Australian Standards

• Width: 1400mm
• Height: 1000mm
• Thickness: 15mm
• Weight: 53kg
• Treatment: Toughened and Heat Soaked
• Edges: Polished all 4 sides

Suitable for installation with:

• 3 x Friction Spigots

1350x1000x15mm Toughened Glass Balustrade Panel with Polished edges

Toughened Glass Panel for Glass Balustrade

Glass is certified to Australian Standards

• Width: 1350mm
• Height: 1000mm
• Thickness: 15mm
• Weight: 51kg
• Treatment: Toughened and Heat Soaked
• Edges: Polished all 4 sides

Suitable for installation with:

• 3 x Friction Spigots

1300x1000x15mm Toughened Glass Balustrade Panel with Polished edges

Toughened Glass Panel for Glass Balustrade

Glass is certified to Australian Standards

• Width: 1300mm
• Height: 1000mm
• Thickness: 15mm
• Weight: 39kg
• Treatment: Toughened and Heat Soaked
• Edges: Polished all 4 sides

Suitable for installation with:

• 3 x Friction Spigots

1250x1000x15mm Toughened Glass Balustrade Panel with Polished edges

Toughened Glass Panel for Glass Balustrade

Glass is certified to Australian Standards

• Width: 1250mm
• Height: 1000mm
• Thickness: 15mm
• Weight: 47kg
• Treatment: Toughened and Heat Soaked
• Edges: Polished all 4 sides

Suitable for installation with:

• 3 x Friction Spigots

1200x1000x15mm Toughened Glass Balustrade Panel with Polished edges

Toughened Glass Panel for Glass Balustrade

Glass is certified to Australian Standards

• Width: 1200mm
• Height: 1000mm
• Thickness: 15mm
• Weight: 45kg
• Treatment: Toughened and Heat Soaked
• Edges: Polished all 4 sides

Suitable for installation with:

• 3 x Friction Spigots

1150x1000x15mm Toughened Glass Balustrade Panel with Polished edges

Toughened Glass Panel for Glass Balustrade

Glass is certified to Australian Standards

• Width: 1150mm
• Height: 1000mm
• Thickness: 15mm
• Weight: 43kg
• Treatment: Toughened and Heat Soaked
• Edges: Polished all 4 sides

Suitable for installation with:

• 3 x Friction Spigots

1100x1000x15mm Toughened Glass Balustrade Panel with Polished edges

Toughened Glass Panel for Glass Balustrade

Glass is certified to Australian Standards

• Width: 1100mm
• Height: 1000mm
• Thickness: 15mm
• Weight: 41kg
• Treatment: Toughened and Heat Soaked
• Edges: Polished all 4 sides

Suitable for installation with:

• 3 x Friction Spigots

1050x1000x15mm Toughened Glass Balustrade Panel with Polished edges

Toughened Glass Panel for Glass Balustrade

Glass is certified to Australian Standards

• Width: 1050mm
• Height: 1000mm
• Thickness: 15mm
• Weight: 39kg
• Treatment: Toughened and Heat Soaked
• Edges: Polished all 4 sides

Suitable for installation with:

• 3 x Friction Spigots

1000x1000x15mm Toughened Glass Balustrade Panel with Polished edges

Toughened Glass Panel for Glass Balustrade

Glass is certified to Australian Standards

• Width: 1000mm
• Height: 1000mm
• Thickness: 15mm
• Weight: 38kg
• Treatment: Toughened and Heat Soaked
• Edges: Polished all 4 sides

Suitable for installation with:

• 2 x Friction Spigots

950x1000x15mm Toughened Glass Balustrade Panel with Polished edges

Toughened Glass Panel for Glass Balustrade

Glass is certified to Australian Standards

• Width: 950mm
• Height: 1000mm
• Thickness: 15mm
• Weight: 36kg
• Treatment: Toughened and Heat Soaked
• Edges: Polished all 4 sides

Suitable for installation with:

• 2 x Friction Spigots

900x100x15mm Toughened Glass Balustrade Panels with Polished edges

Toughened Glass Panel for Glass Balustrade

Glass is certified to Australian Standards

• Width: 900mm
• Height: 1000mm
• Thickness: 15mm
• Weight: 34kg
• Treatment: Toughened and Heat Soaked
• Edges: Polished all 4 sides

Suitable for installation with:

• 2 x Friction Spigots

850x1000x15mm Toughened Glass Balustrade Panels with Polished edges

Toughened Glass Panel for Glass Balustrade

Glass is certified to Australian Standards

• Width: 850mm
• Height: 1000mm
• Thickness: 15mm
• Weight: 32kg
• Treatment: Toughened and Heat Soaked
• Edges: Polished all 4 sides

Suitable for installation with:

• 2 x Friction Spigots

800x1000x15mm Toughened Glass Balustrade Panels with Polished edges

Toughened Glass Panel for Glass Balustrade

Glass is certified to Australian Standards

• Width: 800mm
• Height: 1000mm
• Thickness: 15mm
• Weight: 30kg
• Treatment: Toughened and Heat Soaked
• Edges: Polished all 4 sides

Suitable for installation with:

• 2 x Friction Spigots

750x1000x15mm Toughened Glass Balustrade Panels with Polished edges

Toughened Glass Panel for Glass Balustrade

Glass is certified to Australian Standards

• Width: 750mm
• Height: 1000mm
• Thickness: 15mm
• Weight: 28kg
• Treatment: Toughened and Heat Soaked
• Edges: Polished all 4 sides

Suitable for installation with:

• 2 x Friction Spigots

700x1000x15mm Toughened Glass Balustrade Panels with Polished edges

Toughened Glass Panel for Glass Balustrade

Glass is certified to Australian Standards

• Width: 700mm
• Height: 970mm
• Thickness: 12mm
• Weight: 20kg
• Treatment: Toughened and Heat Soaked
• Edges: Polished all 4 sides

Suitable for installation with:

• Friction Spigots
• Deck Mount Channel
• Side Fix glass clamps off posts

650x1000x15mm Toughened Glass Balustrade Panels with Polished edges

Toughened Glass Panel for Glass Balustrade

Glass is certified to Australian Standards

• Width: 650mm
• Height: 1000mm
• Thickness: 15mm
• Weight: 24kg
• Treatment: Toughened and Heat Soaked
• Edges: Polished all 4 sides

Suitable for installation with:

• 2 x Friction Spigots

600x1000x15mm Toughened Glass Balustrade Panels with Polished edges

Toughened Glass Panel for Glass Balustrade

Glass is certified to Australian Standards

• Width: 600mm
• Height: 1000mm
• Thickness: 15mm
• Weight: 23kg
• Treatment: Toughened and Heat Soaked
• Edges: Polished all 4 sides

Suitable for installation with:

• 2 x Friction Spigots

550x1000x15mm Toughened Glass Balustrade Panels with Polished edges

Toughened Glass Panel for Glass Balustrade

Glass is certified to Australian Standards

• Width: 550mm
• Height: 1000mm
• Thickness: 15mm
• Weight: 21kg
• Treatment: Toughened and Heat Soaked
• Edges: Polished all 4 sides

Suitable for installation with:

• 2 x Friction Spigots

500x1000x15mm Toughened Glass Balustrade Panels with Polished edges

Toughened Glass Panel for Glass Balustrade

Glass is certified to Australian Standards

• Width: 500mm
• Height: 1000mm
• Thickness: 15mm
• Weight: 19kg
• Treatment: Toughened and Heat Soaked
• Edges: Polished all 4 sides

Suitable for installation with:

• 2 x Friction Spigots

450x1000x15mm Toughened Glass Balustrade Panels with Polished edges

Toughened Glass Panel for Glass Balustrade

Glass is certified to Australian Standards

• Width: 450mm
• Height: 1000mm
• Thickness: 15mm
• Weight: 17kg
• Treatment: Toughened and Heat Soaked
• Edges: Polished all 4 sides

Suitable for installation with:

• 2 x Friction Spigots

600x1350x12mm Toughened Glass Pool Fence / Balustrade Panels with Polished Edges

Glass is certified to Australian Standards

• Width: 600mm
• Height: 1350mm
• Thickness: 12mm
• Weight: 22kg

Suitable for installation with:

• Top Mount Friction Spigots
• Face Mount Friction Spigots
• Posts
• Deck Mount Channel
• Side Fix glass clamps

Used for:

• Glass Pool Fencing
• Face Mount Glass Balustrading

It can be installed with a Top Mounted Rail

700x1350x12mm Toughened Glass Pool Fence / Balustrade Panels with Polished Edges

Glass is certified to Australian Standards

• Width: 700mm
• Height: 1200mm
• Thickness: 12mm

Suitable for installation with:

• Friction Spigots
• Posts
• Deck Mount Channel
• Side Fix glass clamps

Used for:

• Glass Pool Fencing
• Face Mount Glass Balustrading

It can be installed with a Top Mounted Rail

800x1350x12mm Toughened Glass Pool Fence / Balustrade Panels with Polished Edges

Glass is certified to Australian Standards

• Width: 800mm
• Height: 1350mm
• Thickness: 12mm
• Weight: 32kg

Suitable for installation with:

• Top Mount Friction Spigots
• Face Mount Friction Spigots
• Posts
• Deck Mount Channel
• Side Fix glass clamps

Used for:

• Glass Pool Fencing
• Face Mount Glass Balustrading

It can be installed with a Top Mounted Rail

900x1350x12mm Toughened Glass Pool Fence / Balustrade Panels with Polished Edges

Glass is certified to Australian Standards

• Width: 900mm
• Height: 1350mm
• Thickness: 12mm
• Weight: 37kg

Suitable for installation with:

• Top Mount Friction Spigots
• Face Mount Friction Spigots
• Posts
• Deck Mount Channel
• Side Fix glass clamps

Used for:

• Glass Pool Fencing
• Face Mount Glass Balustrading

It can be installed with a Top Mounted Rail

1000x1350x12mm Toughened Glass Pool Fence / Balustrade Panels with Polished Edges

Glass is certified to Australian Standards

• Width: 1000mm
• Height: 1350mm
• Thickness: 12mm
• Weight: 41kg

Suitable for installation with:

• Top Mount Friction Spigots
• Face Mount Friction Spigots
• Posts
• Deck Mount Channel
• Side Fix glass clamps

Used for:

• Glass Pool Fencing
• Face Mount Glass Balustrading

It can be installed with a Top Mounted Rail

1100x1350x12mm Toughened Glass Pool Fence / Balustrade Panels with Polished Edges

Glass is certified to Australian Standards

• Width: 1100mm
• Height: 1350mm
• Thickness: 12mm
• Weight: 45kg

Suitable for installation with:

• Top Mount Friction Spigots
• Face Mount Friction Spigots
• Posts
• Deck Mount Channel
• Side Fix glass clamps

Used for:

• Glass Pool Fencing
• Face Mount Glass Balustrading

It can be installed with a Top Mounted Rail

1200x1350x12mm Toughened Glass Pool Fence / Balustrade Panels with Polished Edges

Glass is certified to Australian Standards

• Width: 1200mm
• Height: 1350mm
• Thickness: 12mm
• Weight: 49kg

Suitable for installation with:

• Top Mount Friction Spigots
• Face Mount Friction Spigots
• Posts
• Deck Mount Channel
• Side Fix glass clamps

Used for:

• Glass Pool Fencing
• Face Mount Glass Balustrading

It can be installed with a Top Mounted Rail

1300x1350x12mm Toughened Glass Pool Fence / Balustrade Panels with Polished Edges

Glass is certified to Australian Standards

• Width: 1300mm
• Height: 1350mm
• Thickness: 12mm
• Weight: 53kg

Suitable for installation with:

• Top Mount Friction Spigots
• Face Mount Friction Spigots
• Posts
• Deck Mount Channel
• Side Fix glass clamps

Used for:

• Glass Pool Fencing
• Face Mount Glass Balustrading

It can be installed with a Top Mounted Rail

1400x1350x12mm Toughened Glass Pool Fence / Balustrade Panels with Polished Edges

Glass is certified to Australian Standards

• Width: 1400mm
• Height: 1350mm
• Thickness: 12mm
• Weight: 57kg

Suitable for installation with:

• Top Mount Friction Spigots
• Face Mount Friction Spigots
• Posts
• Deck Mount Channel
• Side Fix glass clamps

Used for:

• Glass Pool Fencing
• Face Mount Glass Balustrading

It can be installed with a Top Mounted Rail

1500x1350x12mm Toughened Glass Pool Fence / Balustrade Panels with Polished Edges

Glass is certified to Australian Standards

• Width: 1500mm
• Height: 1350mm
• Thickness: 12mm
• Weight: 61kg

Suitable for installation with:

• Top Mount Friction Spigots
• Face Mount Friction Spigots
• Posts
• Deck Mount Channel
• Side Fix glass clamps

Used for:

• Glass Pool Fencing
• Face Mount Glass Balustrading

It can be installed with a Top Mounted Rail

1600x1350x12mm Toughened Glass Pool Fence / Balustrade Panels with Polished Edges

Glass is certified to Australian Standards

• Width: 1600mm
• Height: 1350mm
• Thickness: 12mm
• Weight: 65kg

Suitable for installation with:

• Top Mount Friction Spigots
• Face Mount Friction Spigots
• Posts
• Deck Mount Channel
• Side Fix glass clamps

Used for:

• Glass Pool Fencing
• Face Mount Glass Balustrading

It can be installed with a Top Mounted Rail

1200/1500mm High x 1200mm Wide Step down panel

Glass is certified to Australian Standards

Use against a retraining wall or when the height of the glass needs to change.

• Width: 1200mm
• Height: 1200 to 1500mm
• Thickness: 12mm

Suitable for installation with:

• Friction Spigots
• Posts
• Deck Mount Channel
• Side Fix glass clamps

Used for:

• Glass Pool Fencing
• Face Mount Glass Balustrading

1200/1600mm High x 1200mm Wide Step down panel

Glass is certified to Australian Standards

Use against a retraining wall or when the height of the glass needs to change.

• Width: 1200mm
• Height: 1200 to 1600mm
• Thickness: 12mm

Suitable for installation with:

• Friction Spigots
• Posts
• Deck Mount Channel
• Side Fix glass clamps

Used for:

• Glass Pool Fencing
• Face Mount Glass Balustrading

1200/1700mm High x 1200mm Wide Step down panel

Glass is certified to Australian Standards

Use against a retraining wall or when the height of the glass needs to change.

• Width: 1200mm
• Height: 1200 to 1700mm
• Thickness: 12mm

Suitable for installation with:

• Friction Spigots
• Posts
• Deck Mount Channel
• Side Fix glass clamps

Used for:

• Glass Pool Fencing
• Face Mount Glass Balustrading

Inline Silver 795-850mm Door with Fixed Panel Semi-Frameless Shower Screen

• Adjustable between 795 to 850mm wide
• 1950mm High
• 6mm Clear Toughed Glass
• 2 x 29mm U Channels for walls
• Door Opening of 517mm
• Pivot Door with Fixed Panel
• Bright Silver Frame
• Easily width Adjustable with telescopic extrusion Design
• High Quality Pivot Hinges
• Magnetic Water Seals
• Slimline Strong Aluminium Frame
• Fully Reversible Door - Left or Right Opening
• U Channels allow flexibility for installation
• Install on Tiles or Showerbases

Actual Door Panel Size is 653x1871mm

Actual Infill Size is 180x1911mm

Inline Black 795-850mm Door with Fixed Panel Semi-Frameless Shower Screen

• Adjustable between 795 to 850mm wide
• 1950mm High
• 6mm Clear Toughed Glass
• 2 x 29mm U Channels against the wall
• Door Opening of 517mm
• Pivot Door with Fixed Panel
• Matt Black Frame
• Easily width Adjustable with telescopic extrusion Design
• High Quality Pivot Hinges
• Magnetic Water Seals
• Slimline Strong Aluminium Frame
• Fully Reversible Door - Left or Right Opening
• U Channels allow flexibility for installation
• Install on Tiles or Showerbases

Actual Door Panel Size is 653x1871mm

Actual Infill Size is 180x1911mm

Inline Silver 845-900mm Door with Fixed Panel Semi-Frameless Shower Screen

• Adjustable between 845 to 900mm wide
• 1950mm High
• 6mm Clear Toughed Glass
• 2 x 20mm U Channels for walls
• Door Opening of 567mm
• Pivot Door with Fixed Panel
• Bright Silver Frame
• Easily width Adjustable with telescopic extrusion Design
• High Quality Pivot Hinges
• Magnetic Water Seals
• Slimline Strong Aluminium Frame
• Fully Reversible Door - Left or Right Opening
• U Channels allow flexibility for installation
• Install on Tiles or Showerbases

Actual Door Panel Size is 702x1871mm

Actual Infill Size is 180x1911mm

Inline Black 845-900mm Door with Fixed Panel Semi-Frameless Shower Screen

• Adjustable between 845 to 900mm wide
• 1950mm High
• 6mm Clear Toughed Glass
• 2 x 20mm U Channels against the wall
• Door Opening of 567mm
• Pivot Door with Fixed Panel
• Matt Black Frame
• Easily width Adjustable with telescopic extrusion Design
• High Quality Pivot Hinges
• Magnetic Water Seals
• Slimline Strong Aluminium Frame
• Fully Reversible Door - Left or Right Opening
• U Channels allow flexibility for installation
• Install on Tiles or Showerbases

Actual Door Panel Size is 702x1871mm

Actual Infill Size is 180x1911mm

Inline Silver 885-990mm Door with Fixed Panel Semi-Frameless Shower Screen

• Adjustable between 885 to 990mm wide
• 1950mm High
• 6mm Clear Toughed Glass
• 2 x 20mm U Channels for walls
• Door Opening of 567mm
• Pivot Door with Fixed Panel
• Bright Silver Frame
• Easily width Adjustable with telescopic extrusion Design
• High Quality Pivot Hinges
• Magnetic Water Seals
• Slimline Strong Aluminium Frame
• Fully Reversible Door - Left or Right Opening
• U Channels allow flexibility for installation
• Install on Tiles or Showerbases

Actual Door Panel Size is 752x1871mm

Actual Infill Size is 220x1911mm

Inline Black 885-990mm Door with Fixed Panel Semi-Frameless Shower Screen

• Adjustable between 885 to 990mm wide
• 1950mm High
• 6mm Clear Toughed Glass
• 2 x 20mm U Channels against the wall
• Door Opening of 567mm
• Pivot Door with Fixed Panel
• Matt Black Frame
• Easily width Adjustable with telescopic extrusion Design
• High Quality Pivot Hinges
• Magnetic Water Seals
• Slimline Strong Aluminium Frame
• Fully Reversible Door - Left or Right Opening
• U Channels allow flexibility for installation
• Install on Tiles or Showerbases

Actual Door Panel Size is 752x1871mm

Actual Infill Size is 220x1911mm