1950mm Matt Black Sliding Shower Screen Rail

• Length: 1950mm
• Finish: Matt Black
• Opening: Suits wall to wall openings of 1540mm to 1940mm
• Rail Dimensions: 30mm high x 10mm wide
• Pre-Drilled and ready to install with modular panels.
• Simply cut down ends to desired overall width.

1950mm Brushed Nickel Sliding Shower Screen Rail

• Length: 1950mm
• Finish: Brushed Nickel
• Opening: Suits wall to wall openings of 1540mm to 1940mm
• Rail Dimensions: 30mm high x 10mm wide
• Pre-Drilled and ready to install with modular panels.
• Simply cut down ends to desired overall width.

1950mm Brushed Brass/Gold Sliding Shower Screen Rail

• Length: 1950mm
• Finish: Brushed Brass/Gold
• Opening: Suits wall to wall openings of 1540mm to 1940mm
• Rail Dimensions: 30mm high x 10mm wide
• Pre-Drilled and ready to install with modular panels.
• Simply cut down ends to desired overall width.

125mm Enduroshield Glass Coat

125mm EnduroShield Glass Coat

• Treats up to 8 Square Metres
• For Pool Fences and Balustrades use on both sides of the glass
• For Shower Screens use on shower side of the glass

500mm Enduroshield Glass Coat

500mm EnduroShield Glass Coat

• Treats up to 32 Square Metres
• For Pool Fences and Balustrades use on both sides of the glass
• For Shower Screens use on shower side of the glass

Polished Chrome Slimline Rail Wall Bracket

Polished Chrome Finish

Only required if using a 650mm modular Fixed Glass Panel

Matt Black Slimline Rail Wall Bracket

Matt Black Finish

Only required if using a 650mm modular Fixed Glass Panel

Brushed Nickel Slimline Rail Wall Bracket

Brushed Nickel Finish

Only required if using a 650mm modular Fixed Glass Panel

Brushed Brass/Gold Slimline Rail Wall Bracket

Brushed Brass/Gold Finish

Only required if using a 650mm modular Fixed Glass Panel

Polished Chrome 90° Bracket for Sliding Shower Screen

Required when installing a sliding shower door with a glass return panel.

Matt Black 90° Bracket for Sliding Shower Screen

Required when installing a sliding shower door with a glass return panel.

Brushed Nickel 90° Bracket for Sliding Shower Screen

Required when installing a sliding shower door with a glass return panel.

Brushed Brass/Gold 90° Bracket for Sliding Shower Screen

Required when installing a sliding shower door with a glass return panel.

Radius Corner Shower Screen Panel

Radius Corner Shower Screen Fixed Panel

1. Grade "A" Clear Toughened Glass
2. 200mm Radius in Top Corner
3. Rotate glass for Right and Left Hand Installation
4. 2050mm High
5. 10mm Toughened Safety Glass with Polished Edges
6. Available in 3 widths (897mm, 997mm and 1197mm) - Select your width from the list

897(w)x2050(h)x10mm Glass Shower Screen Panel with 200mm Radius Top Corner

• Corner: 200mm Radius
• Width: 897mm
• Height: 2050mm
• Thickness: 10mm
• Weight: 46kg
• Allow a 3mm Gap between the wall and glass and a 3mm Gap between this panel and the door.

Installation Widths:

• 900mm when installing with a wall bracket
• 907-910mm when installing with 19mm U Channel
• 907-922mm when installing with 35mm U Channel

997(w)x2050(h)x10mm Glass Shower Screen Panel with 200mm Radius Top Corner

• Corner: 200mm Radius
• Width: 997mm
• Height: 2050mm
• Thickness: 10mm
• Weight: 51kg
• Allow a 3mm Gap between the wall and glass and a 3mm Gap between this panel and the door.

Installation Widths:

• 1000mm when installing with a wall bracket
• 1007-1010mm when installing with 19mm U Channel
• 1007-1022mm when installing with 35mm U Channel

1197(w)x2050(h)x10mm Glass Shower Screen Panel with 200mm Radius Top Corner

• Corner: 200mm Radius
• Width: 1197mm
• Height: 2050mm
• Thickness: 10mm
• Weight: 61kg
• Allow a 3mm Gap between the wall and glass and a 3mm Gap between this panel and the door.

Installation Widths:

• 1200mm when installing with a wall bracket
• 1207-1210mm when installing with 19mm U Channel
• 1207-1222mm when installing with 35mm U Channel

Narrow Reeded Radius Corner Shower Screen Panel

Shower Screen Fixed Panel

1. Ultraclear Narrow Reeded Glass
2. 200mm Radius in Top Left or Right Corners
3. 2050mm High
4. 10mm Toughened Safety Glass with Polished Edges
5. Available in 3 widths - Select your width from the list

897mm x 2050mm Narrow Reed Radius to Right Corner

• Corner: 200mm Radius in Right Hand Corner
• Width: 897mm
• Height: 2050mm
• Thickness: 10mm
• Weight: 46kg
• Allow a 3mm Gap between the wall and glass and a 3mm Gap between this panel and the door.

Installation Widths:

• 900mm when installing with a wall bracket
• 907-910mm when installing with 19mm U Channel
• 907-922mm when installing with 35mm U Channel

897mm x 2050mm Narrow Reed Radius to Left Corner

• Corner: 200mm Radius in Left Hand Corner
• Width: 897mm
• Height: 2050mm
• Thickness: 10mm
• Weight: 46kg
• Allow a 3mm Gap between the wall and glass and a 3mm Gap between this panel and the door.

Installation Widths:

• 900mm when installing with a wall bracket
• 907-910mm when installing with 19mm U Channel
• 907-922mm when installing with 35mm U Channel

997mm x 2050mm Narrow Reed Radius to Right Corner

• Corner: 200mm Radius in Right Hand Corner
• Width: 997mm
• Height: 2050mm
• Thickness: 10mm
• Weight: 51kg
• Allow a 3mm Gap between the wall and glass and a 3mm Gap between this panel and the door.

Installation Widths:

• 1000mm when installing with a wall bracket
• 1007-1010mm when installing with 19mm U Channel
• 1007-1022mm when installing with 35mm U Channel

997mm x 2050mm Narrow Reed Radius to Left Corner

• Corner: 200mm Radius in Left Hand Corner
• Width: 997mm
• Height: 2050mm
• Thickness: 10mm
• Weight: 51kg
• Allow a 3mm Gap between the wall and glass and a 3mm Gap between this panel and the door.

Installation Widths:

• 1000mm when installing with a wall bracket
• 1007-1010mm when installing with 19mm U Channel
• 1007-1022mm when installing with 35mm U Channel

1197mm x 2050mm Narrow Reed Radius to Right Corner

• Corner: 200mm Radius in Right Hand Corner
• Width: 1197mm
• Height: 2050mm
• Thickness: 10mm
• Weight: 61kg
• Allow a 3mm Gap between the wall and glass and a 3mm Gap between this panel and the door.

Installation Widths:

• 1200mm when installing with a wall bracket
• 1207-1210mm when installing with 19mm U Channel
• 1207-1222mm when installing with 35mm U Channel

1197mm x 2050mm Narrow Reed Radius to Left Corner

• Corner: 200mm Radius in Left Hand Corner
• Width: 1197mm
• Height: 2050mm
• Thickness: 10mm
• Weight: 61kg
• Allow a 3mm Gap between the wall and glass and a 3mm Gap between this panel and the door.

Installation Widths:

• 1200mm when installing with a wall bracket
• 1207-1210mm when installing with 19mm U Channel
• 1207-1222mm when installing with 35mm U Channel

Shower Screen Fixing Options

Wall Bracket - Chrome Plated - For Shower Screen

Used to fix Hinge and Return/Fixed panels to the wall.

3 Per Panel recommended

• Wall Bracket
• 3mm Gap between glass and wall
• Chrome Plated Finish
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• 2 x Compression/Friction screws
• No holes in glass required
• Made from solid brass
• 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

Wall Bracket - Matt Black - For Glass Shower Screen

Used to fix Hinge and Return/Fixed panels to the wall.

3 Per Panel recommended

• Wall Bracket
• 3mm Gap between glass and wall
• Matt Black Finish
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• 2 x Compression/Friction screws
• No holes in glass required
• Made from solid brass
• 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

Wall Bracket - Brushed Brass / Gold - For Shower Screen

Used to fix Hinge and Return/Fixed panels to the wall.

3 Per Panel recommended

• Wall Bracket
• 3mm Gap between glass and wall
• Brushed Brass / Gold Finish
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• 2 x Compression/Friction screws
• No holes in glass required
• Made from solid brass
• 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

Matt White Glass Shower Screen Wall Bracket

Used to fix Hinge and Return/Fixed panels to the wall.

3 Per Panel recommended

• Wall Bracket
• 3mm Gap between glass and wall
• Matt White Finish
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• 2 x Compression/Friction screws
• No holes in glass required
• Made from solid brass
• 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

Gunmetal Grey Glass Shower Screen Wall Bracket

Used to fix Hinge and Return/Fixed panels to the wall.

3 Per Panel recommended

• Wall Bracket
• 3mm Gap between glass and wall
• Gunmetal Grey Finish
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• 2 x Compression/Friction screws
• No holes in glass required
• Made from solid brass
• 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

Brushed Nickel Glass Shower Screen Wall Bracket

Used to fix Hinge and Return/Fixed panels to the wall.

3 Per Panel recommended

• Wall Bracket
• 3mm Gap between glass and wall
• Brushed Nickel Finish
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• 2 x Compression/Friction screws
• No holes in glass required
• Made from solid brass
• 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

Offset Wall Bracket - Chrome Plated - For Shower Screen

Used to fix Hinge and Return/Fixed panels to the wall in a shower screen.

3 Per Panel recommended

These are easier to install then the hidden screw wall bracket. The screw can be marked and installed with the glass standing in place.

• Offset Wall Bracket for Shower Screens
• Chrome Finish
• 3mm Gap between glass and wall
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• 2 x Compression/Friction screws
• No holes in glass required
• Made from solid brass
• 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used.

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

Offset Wall Bracket - Matt Black - For Glass Shower Screen

Used to fix Hinge and Return/Fixed panels to the wall.

3 Per Panel recommended

These are easier to install then the hidden screw wall bracket. The screw can be marked and installed with the glass standing in place.

• Wall Bracket
• Matt Black Finish
• 3mm Gap between glass and wall
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• 2 x Compression/Friction screws
• No holes in glass required
• Made from solid brass
• 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used.

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

Offset Wall Bracket - Brushed Brass / Gold - For Shower Screen

Used to fix Hinge and Return/Fixed panels to the wall in a shower screen.

3 Per Panel recommended

These are easier to install then the hidden screw wall bracket. The screw can be marked and installed with the glass standing in place.

• Offset Wall Bracket for Shower Screens
• Brushed Gold Finish
• 3mm Gap between glass and wall
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• 2 x Compression/Friction screws
• No holes in glass required
• Made from solid brass
• 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used.

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

Matt White Glass Shower Screen Offset Wall Bracket

Used to fix Hinge and Return/Fixed panels to the wall in a shower screen.

3 Per Panel recommended

These are easier to install then the hidden screw wall bracket. The screw can be marked and installed with the glass standing in place.

• Offset Wall Bracket for Shower Screens
• Matt White Finish
• 3mm Gap between glass and wall
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• 2 x Compression/Friction screws
• No holes in glass required
• Made from solid brass
• 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used.

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

Gunmetal Grey Glass Shower Screen Offset Wall Bracket

Used to fix Hinge and Return/Fixed panels to the wall in a shower screen.

3 Per Panel recommended

These are easier to install then the hidden screw wall bracket. The screw can be marked and installed with the glass standing in place.

• Offset Wall Bracket for Shower Screens
• Gunmetal Grey Finish
• 3mm Gap between glass and wall
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• 2 x Compression/Friction screws
• No holes in glass required
• Made from solid brass
• 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used.

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

Brushed Nickel Glass Shower Screen Offset Wall Bracket

Used to fix Hinge and Return/Fixed panels to the wall in a shower screen.

3 Per Panel recommended

These are easier to install then the hidden screw wall bracket. The screw can be marked and installed with the glass standing in place.

• Offset Wall Bracket for Shower Screens
• Brushed Nickel Finish
• 3mm Gap between glass and wall
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• 2 x Compression/Friction screws
• No holes in glass required
• Made from solid brass
• 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used.

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

19mm Wide 2100mm long Matt Black Shower Screen Aluminium U Channel

• 19mm Slimline Anodised Aluminium Channel
• Adds 8mm to the overall glass width
• Matt Black Finish
• Dry Glaze System - No need for silicon in glass
• Suits 10mm Glass
• Consider using where the wall is out of square (up to 6mm) or where a slimline channel looks is desired
• Unique Aluminium extrusion has internal ribs which hold secure 2part Clear Glazing PVC
• Fast Installation
• U-Channel & 2 Part Glazing PVC Included

19mm Wide 2100mm Long Brushed Brass / Gold Shower Screen Aluminium U Channel

• 19mm Slimline Anodised Aluminium Channel
• Adds 8mm to the overall glass width
• Brushed Brass / Gold Finish
• Dry Glaze System - No need for silicon in glass
• Suits 10mm Glass
• Consider using where the wall is out of square (up to 6mm) or where a slimline channel looks is desired
• Unique Aluminium extrusion has internal ribs which hold secure 2part Clear Glazing PVC
• Fast Installation
• U-Channel & 2 Part Glazing PVC Included

Matt White Shower Screen Wall Channel - 19mm Deep 2100mm Long

• 19mm Slimline Aluminium Channel
• Adds 8mm to the overall glass width
• Matt White Finish
• Dry Glaze System - No need for silicon in glass
• Suits 10mm Glass
• Consider using where the wall is out of square (up to 6mm) or where a slimline channel looks is desired
• Unique Aluminium extrusion has internal ribs which hold secure 2part Clear Glazing PVC
• Fast Installation
• U-Channel & 2 Part Glazing PVC Included

19mm Wide Gunmetal Grey Glass Shower Screen Wall Channel

Brushed Nickel 19mm Deep 2100mm Long Shower Screen Wall Channel

• 19mm Slimline Aluminium Channel
• Adds 8mm to the overall glass width
• Matt White Finish
• Dry Glaze System - No need for silicon in glass
• Suits 10mm Glass
• Consider using where the wall is out of square (up to 6mm) or where a slimline channel looks is desired
• Unique Aluminium extrusion has internal ribs which hold secure 2part Clear Glazing PVC
• Fast Installation
• U-Channel & 2 Part Glazing PVC Included

35mm Wide 2100mm long Matt Black Shower Screen Aluminium U Channel

• 35mm Slimline Anodised Aluminium Channel
• Adds 8mm to the overall glass width
• Matt Black Finish
• Dry Glaze System - No need for silicon in glass
• Suits 10mm Glass
• Consider using where the wall is out of square (up to 6mm) or where a slimline channel looks is desired
• Unique Aluminium extrusion has internal ribs which hold secure 2part Clear Glazing PVC
• Fast Installation
• U-Channel & 2 Part Glazing PVC Included

35mm Deep 2100mm Long Brushed Brass / Gold Shower Screen Aluminium U Channel

• 35mm Deep Anodised Aluminium Channel
• Adds 10mm to 25mm to the overall glass width
• Brushed Gold Finish
• Dry Glaze System - No need for silicon in glass
• Suits 10mm Glass
• Consider using where the wall is out of square (up to 15mm) or where a slimline channel looks is desired
• Unique Aluminium extrusion has internal ribs which hold secure 2part Clear Glazing PVC
• Fast Installation
• U-Channel & 2 Part Glazing PVC Included

Matt White Shower Screen Wall Channel - 35mm Deep 2100mm Long

• 35mm Deep Aluminium Channel
• Adds 10mm to 25mm to the overall glass width
• Matt White Finish
• Dry Glaze System - No need for silicon in glass
• Suits 10mm Glass
• Consider using where the wall is out of square (up to 15mm) or where a slimline channel looks is desired
• Unique Aluminium extrusion has internal ribs which hold secure 2part Clear Glazing PVC
• Fast Installation
• U-Channel & 2 Part Glazing PVC Included

35mm Wide Gunmetal Grey Glass Shower Screen Wall Channel

Brushed Nickel 35mm Deep 2100mm Long Shower Screen Wall Channel

• 35mm Deep Aluminium Channel
• Adds 10mm to 25mm to the overall glass width
• Brushed Nickel Finish
• Dry Glaze System - No need for silicon in glass
• Suits 10mm Glass
• Consider using where the wall is out of square (up to 15mm) or where a slimline channel looks is desired
• Unique Aluminium extrusion has internal ribs which hold secure 2part Clear Glazing PVC
• Fast Installation
• U-Channel & 2 Part Glazing PVC Included

35mm Wide 2100mm long Matt Black Shower Screen Aluminium U Channel

• 35mm Slimline Anodised Aluminium Channel
• Adds 8mm to the overall glass width
• Matt Black Finish
• Dry Glaze System - No need for silicon in glass
• Suits 10mm Glass
• Consider using where the wall is out of square (up to 6mm) or where a slimline channel looks is desired
• Unique Aluminium extrusion has internal ribs which hold secure 2part Clear Glazing PVC
• Fast Installation
• U-Channel & 2 Part Glazing PVC Included

2050(h)x10mm Glass Shower Screen Hinge Panel

229(w)x2050(h)x10mm Glass Shower Screen Hinge Panel

• Width: 229mm
• Height: 2050mm
• Thickness: 10mm
• Weight: 12kg
• Allow a 3mm Gap between the wall and glass and a 5mm Gap between this panel and the door.

When installed using Wall Brackets:

• When installed with a 600mm door in a corner configuration using a return panel the overall width will be 850mm
• When installed with a 600mm door between two wall the overall width will be 840mm

When installed using U Channel:

• When installed with a 600mm door in a corner configuration using a return panel the overall width will be 858mm
• When installed with a 600mm door between two wall the overall width will be 848mm

279(w)x2050(h)x10mm Glass Shower Screen Hinge Panel

• Width: 279mm
• Height: 2050mm
• Thickness: 10mm
• Weight: 14kg
• Allow a 3mm Gap between the wall and glass and a 5mm Gap between this panel and the door.

When installed using Wall Brackets:

• When installed with a 600mm door in a corner configuration using a return panel the overall width will be 900mm
• When installed with a 600mm door between two wall the overall width will be 890mm

When installed using U Channel:

• When installed with a 600mm door in a corner configuration using a return panel the overall width will be 908mm
• When installed with a 600mm door between two wall the overall width will be 898mm

329(w)x2050(h)x10mm Glass Shower Screen Hinge Panel

• Width: 329mm
• Height: 2050mm
• Thickness: 10mm
• Weight: 17kg
• Allow a 3mm Gap between the wall and glass and a 5mm Gap between this panel and the door.

When installed using Wall Brackets:

• When installed with a 600mm door in a corner configuration using a return panel the overall width will be 950mm
• When installed with a 600mm door between two wall the overall width will be 940mm

When installed using U Channel:

• When installed with a 600mm door in a corner configuration using a return panel the overall width will be 958mm
• When installed with a 600mm door between two wall the overall width will be 948mm

379(w)x2050(h)x10mm Glass Shower Screen Hinge Panel

• Width: 379mm
• Height: 2050mm
• Thickness: 10mm
• Weight: 19kg
• Allow a 3mm Gap between the wall and glass and a 5mm Gap between this panel and the door.

When installed using Wall Brackets:

• When installed with a 600mm door in a corner configuration using a return panel the overall width will be 1000mm
• When installed with a 600mm door between two wall the overall width will be 990mm

When installed using U Channel:

• When installed with a 600mm door in a corner configuration using a return panel the overall width will be 1008mm
• When installed with a 600mm door between two wall the overall width will be 998mm

429(w)x2050(h)x10mm Glass Shower Screen Hinge Panel

• Width: 429mm
• Height: 2050mm
• Thickness: 10mm
• Weight: 22kg
• Allow a 3mm Gap between the wall and glass and a 5mm Gap between this panel and the door.

When installed using Wall Brackets:

• When installed with a 600mm door in a corner configuration using a return panel the overall width will be 1050mm
• When installed with a 600mm door between two wall the overall width will be 1040mm

When installed using U Channel:

• When installed with a 600mm door in a corner configuration using a return panel the overall width will be 1058mm
• When installed with a 600mm door between two wall the overall width will be 1048mm

479(w)x2050(h)x10mm Glass Shower Screen Hinge Panel

• Width: 479mm
• Height: 2050mm
• Thickness: 10mm
• Weight: 24kg
• Allow a 3mm Gap between the wall and glass and a 5mm Gap between this panel and the door.

When installed using Wall Brackets:

• When installed with a 600mm door in a corner configuration using a return panel the overall width will be 1100mm
• When installed with a 600mm door between two wall the overall width will be 1090mm

When installed using U Channel:

• When installed with a 600mm door in a corner configuration using a return panel the overall width will be 1108mm
• When installed with a 600mm door between two wall the overall width will be 1098mm

529(w)x2050(h)x10mm Glass Shower Screen Hinge Panel

• Width: 529mm
• Height: 2050mm
• Thickness: 10mm
• Weight: 27kg
• Allow a 3mm Gap between the wall and glass and a 5mm Gap between this panel and the door.

When installed using Wall Brackets:

• When installed with a 600mm door in a corner configuration using a return panel the overall width will be 1150mm
• When installed with a 600mm door between two wall the overall width will be 1140mm

When installed using U Channel:

• When installed with a 600mm door in a corner configuration using a return panel the overall width will be 1158mm
• When installed with a 600mm door between two wall the overall width will be 1148mm

579(w)x2050(h)x10mm Glass Shower Screen Hinge Panel

• Width: 579mm
• Height: 2050mm
• Thickness: 10mm
• Weight: 30kg
• Allow a 3mm Gap between the wall and glass and a 5mm Gap between this panel and the door.

When installed using Wall Brackets:

• When installed with a 600mm door in a corner configuration using a return panel the overall width will be 1200mm
• When installed with a 600mm door between two wall the overall width will be 1190mm

When installed using U Channel:

• When installed with a 600mm door in a corner configuration using a return panel the overall width will be 1208mm
• When installed with a 600mm door between two wall the overall width will be 1198mm

Insulated Core Hole Spigot

• High-technology insulated pool fencing spigot
• Electrical Insulation Tested
• Durable polymer insulating barrier precisely formed over premium SS2205 stainless steel
• 47mm front profile
• Tapered, anti-toe-hold top design
• Compatible with frameless glass 12mm toughened panels
  
  

Coming Soon Bright Silver Core Hole Spigot with Dress Ring

• High-technology insulated pool fencing spigot
• Electrical Insulation Tested
• Durable polymer insulating barrier precisely formed over premium SS2205 stainless steel
• 47mm front profile
• Tapered, anti-toe-hold top design
• Compatible with frameless glass 12mm toughened panels
  
  

Coming Soon Bright Silver Core Hole Spigot with Dress Ring and Extender

• High-technology insulated pool fencing spigot
• Electrical Insulation Tested
• Durable polymer insulating barrier precisely formed over premium SS2205 stainless steel
• 47mm front profile
• Tapered, anti-toe-hold top design
• Compatible with frameless glass 12mm toughened panels
  
  

Coming Soon Coming Soon Bright Silver Core Hole Spigot

• High-technology insulated pool fencing spigot
• Electrical Insulation Tested
• Durable polymer insulating barrier precisely formed over premium SS2205 stainless steel
• 47mm front profile
• Tapered, anti-toe-hold top design
• Compatible with frameless glass 12mm toughened panels
  
  

Bright Silver Core Hole Spigot with Extender

• High-technology insulated pool fencing spigot
• Electrical Insulation Tested
• Durable polymer insulating barrier precisely formed over premium SS2205 stainless steel
• 47mm front profile
• Tapered, anti-toe-hold top design
• Compatible with frameless glass 12mm toughened panels
  
  

Matt Black Core Hole Spigot with Dress Ring

• Matt Black Finish
• High-technology insulated pool fencing spigot
• Electrical Insulation Tested
• Durable polymer insulating barrier precisely formed over premium SS2205 stainless steel
• 47mm front profile
• Tapered, anti-toe-hold top design
• Compatible with frameless glass 12mm toughened panels
  
  
• Includes a 105x109mm Dress Ring to cover installation grout

Matt Black Core Hole Spigot with Dress Ring and Extender

• Matt Black Finish
• High-technology insulated pool fencing spigot
• Electrical Insulation Tested
• Durable polymer insulating barrier precisely formed over premium SS2205 stainless steel
• 47mm front profile
• Tapered, anti-toe-hold top design
• Compatible with frameless glass 12mm toughened panels
  
  
• Includes a 105x109mm Dress Ring to cover installation grout
• Includes a 93mm Extender that bolts to the bottom of the spigot for extra embedment if required

Matt Black Core Hole Spigot

• Matt Black Finish
• High-technology insulated pool fencing spigot
• Electrical Insulation Tested
• Durable polymer insulating barrier precisely formed over premium SS2205 stainless steel
• 47mm front profile
• Tapered, anti-toe-hold top design
• Compatible with frameless glass 12mm toughened panels
  
  

Matt Black Core Hole Spigot with Extender

• Matt Black Finish
• High-technology insulated pool fencing spigot
• Electrical Insulation Tested
• Durable polymer insulating barrier precisely formed over premium SS2205 stainless steel
• 47mm front profile
• Tapered, anti-toe-hold top design
• Compatible with frameless glass 12mm toughened panels
  
  
• Includes a 93mm Extender that bolts to the bottom of the spigot for extra embedment if required

Coming Soon Matt White Core Hole Spigot with Dress Ring

• High-technology insulated pool fencing spigot
• Electrical Insulation Tested
• Durable polymer insulating barrier precisely formed over premium SS2205 stainless steel
• 47mm front profile
• Tapered, anti-toe-hold top design
• Compatible with frameless glass 12mm toughened panels
  
  

Coming Soon Matt White Core Hole Spigot with Dress Ring and Extender

• High-technology insulated pool fencing spigot
• Electrical Insulation Tested
• Durable polymer insulating barrier precisely formed over premium SS2205 stainless steel
• 47mm front profile
• Tapered, anti-toe-hold top design
• Compatible with frameless glass 12mm toughened panels
  
  

Coming Soon Matt White Core Hole Spigot

• High-technology insulated pool fencing spigot
• Electrical Insulation Tested
• Durable polymer insulating barrier precisely formed over premium SS2205 stainless steel
• 47mm front profile
• Tapered, anti-toe-hold top design
• Compatible with frameless glass 12mm toughened panels
  
  

Coming Soon Matt White Core Hole Spigot with Extender

• High-technology insulated pool fencing spigot
• Electrical Insulation Tested
• Durable polymer insulating barrier precisely formed over premium SS2205 stainless steel
• 47mm front profile
• Tapered, anti-toe-hold top design
• Compatible with frameless glass 12mm toughened panels
  
  

Insulated Base Plate Spigot

• High-technology insulated pool fencing spigot
• Electrical Insulation Tested
• Durable polymer insulating barrier precisely formed over premium SS2205 stainless steel
• 47mm front profile
• Tapered, anti-toe-hold top design
• Compatible with frameless glass 12mm toughened panels
  
  

Coming Soon Silver Gloss Base Plate Spigot with Cover

• High-technology insulated pool fencing spigot
• Electrical Insulation Tested
• Durable polymer insulating barrier precisely formed over premium SS2205 stainless steel
• 47mm front profile
• Tapered, anti-toe-hold top design
• Compatible with frameless glass 12mm toughened panels
  
  

Coming Soon Matt White Base Plate Spigot

• High-technology insulated pool fencing spigot
• Electrical Insulation Tested
• Durable polymer insulating barrier precisely formed over premium SS2205 stainless steel
• 47mm front profile
• Tapered, anti-toe-hold top design
• Compatible with frameless glass 12mm toughened panels
  
  

Coming Soon Matt White Base Plate Spigot with Cover and Screws

• High-technology insulated pool fencing spigot
• Electrical Insulation Tested
• Durable polymer insulating barrier precisely formed over premium SS2205 stainless steel
• 47mm front profile
• Tapered, anti-toe-hold top design
• Compatible with frameless glass 12mm toughened panels
  
  

Coming Soon Matt White Base Plate Spigot with Cover

• High-technology insulated pool fencing spigot
• Electrical Insulation Tested
• Durable polymer insulating barrier precisely formed over premium SS2205 stainless steel
• 47mm front profile
• Tapered, anti-toe-hold top design
• Compatible with frameless glass 12mm toughened panels
  
  

Matt Black Base Plate Spigot with Screws

• Matt Black Finish
• High-technology insulated pool fencing spigot
• Electrical Insulation Tested
• Durable polymer insulating barrier precisely formed over premium SS2205 stainless steel
• 47mm front profile
• Tapered, anti-toe-hold top design
• Compatible with frameless glass 12mm toughened panels
  
  
• Includes a 93mm Extender that bolts to the bottom of the spigot for extra embedment if required

Matt Black Base Plate Spigot

• Matt Black Finish
• High-technology insulated pool fencing spigot
• Electrical Insulation Tested
• Durable polymer insulating barrier precisely formed over premium SS2205 stainless steel
• 47mm front profile
• Tapered, anti-toe-hold top design
• Compatible with frameless glass 12mm toughened panels
  
  

Matt Black Base Plate Spigots with Cover and Screws

• Matt Black Finish
• High-technology insulated pool fencing spigot
• Electrical Insulation Tested
• Durable polymer insulating barrier precisely formed over premium SS2205 stainless steel
• 47mm front profile
• Tapered, anti-toe-hold top design
• Compatible with frameless glass 12mm toughened panels
  
  
• Includes a 105x109mm Dress Ring to cover installation grout
• Includes a 93mm Extender that bolts to the bottom of the spigot for extra embedment if required

Matt Black Base Plate Spigot with Cover

• Matt Black Finish
• High-technology insulated pool fencing spigot
• Electrical Insulation Tested
• Durable polymer insulating barrier precisely formed over premium SS2205 stainless steel
• 47mm front profile
• Tapered, anti-toe-hold top design
• Compatible with frameless glass 12mm toughened panels
  
  
• Includes a 105x109mm Dress Ring to cover installation grout

Coming Soon Silver Gloss Base Plate Spigot with Screws

• High-technology insulated pool fencing spigot
• Electrical Insulation Tested
• Durable polymer insulating barrier precisely formed over premium SS2205 stainless steel
• 47mm front profile
• Tapered, anti-toe-hold top design
• Compatible with frameless glass 12mm toughened panels
  
  

Coming Soon Silver Gloss Base Plate Spigot

• High-technology insulated pool fencing spigot
• Electrical Insulation Tested
• Durable polymer insulating barrier precisely formed over premium SS2205 stainless steel
• 47mm front profile
• Tapered, anti-toe-hold top design
• Compatible with frameless glass 12mm toughened panels
  
  

Coming Soon Silver Glass Base Plate Spigot with Cover and Screws

• High-technology insulated pool fencing spigot
• Electrical Insulation Tested
• Durable polymer insulating barrier precisely formed over premium SS2205 stainless steel
• 47mm front profile
• Tapered, anti-toe-hold top design
• Compatible with frameless glass 12mm toughened panels
  
  

Coming Soon Matt White Base Plate Spigot with Screws

• High-technology insulated pool fencing spigot
• Electrical Insulation Tested
• Durable polymer insulating barrier precisely formed over premium SS2205 stainless steel
• 47mm front profile
• Tapered, anti-toe-hold top design
• Compatible with frameless glass 12mm toughened panels
  
  

Coming Soon Silver Gloss Base Plate Spigot with Cover and Threaded Rods

• High-technology insulated pool fencing spigot
• Electrical Insulation Tested
• Durable polymer insulating barrier precisely formed over premium SS2205 stainless steel
• 47mm front profile
• Tapered, anti-toe-hold top design
• Compatible with frameless glass 12mm toughened panels
  
  

Coming Soon Silver Gloss Base Plate Spigot and Threaded Rods

• High-technology insulated pool fencing spigot
• Electrical Insulation Tested
• Durable polymer insulating barrier precisely formed over premium SS2205 stainless steel
• 47mm front profile
• Tapered, anti-toe-hold top design
• Compatible with frameless glass 12mm toughened panels
  
  

Matt Black Base Plate Spigot with Cover and Threaded Rods

• High-technology insulated pool fencing spigot
• Electrical Insulation Tested
• Durable polymer insulating barrier precisely formed over premium SS2205 stainless steel
• 47mm front profile
• Tapered, anti-toe-hold top design
• Compatible with frameless glass 12mm toughened panels
  
  

Matt Black Base Plate Spigots with Threaded Rods

• High-technology insulated pool fencing spigot
• Electrical Insulation Tested
• Durable polymer insulating barrier precisely formed over premium SS2205 stainless steel
• 47mm front profile
• Tapered, anti-toe-hold top design
• Compatible with frameless glass 12mm toughened panels
  
  

Coming Soon Matt White Base Plate Spigot with Cover and Threaded Rods

• High-technology insulated pool fencing spigot
• Electrical Insulation Tested
• Durable polymer insulating barrier precisely formed over premium SS2205 stainless steel
• 47mm front profile
• Tapered, anti-toe-hold top design
• Compatible with frameless glass 12mm toughened panels
  
  

Coming Soon Matt White Base Plate Spigots with Threaded Rods

• High-technology insulated pool fencing spigot
• Electrical Insulation Tested
• Durable polymer insulating barrier precisely formed over premium SS2205 stainless steel
• 47mm front profile
• Tapered, anti-toe-hold top design
• Compatible with frameless glass 12mm toughened panels
  
  

Polystainless Non-Conductive Core Hole Spigot

• No electrician required for earthing – save time and money!
• NATA tested in accordance with Australian Standards (AS1926.1 Safety Barriers for Pools)
• Made from ultra-robust, UV stabilised reinforced composite material giving a stainless steel feel and appearance (patented product)
• Composite construction – surface will not rust or corrode
• Suits 12mm thick glass panels
• Designed for core drill installations
• Recessed friction plate for ease of install
• Spigot and dress ring available in matt black or silver finish

Silver Polystainless Non-Conductive Core Hole Spigot with Dress Ring

• Silver Core Hole Spigot and Dress Ring
• No electrician required for earthing – save time and money!
• NATA tested in accordance with Australian Standards (AS1926.1 Safety Barriers for Pools)
• Made from ultra-robust, UV stabilised reinforced composite material giving a stainless steel feel and appearance (patented product)
• Composite construction – surface will not rust or corrode
• Suits 12mm thick glass panels
• Designed for core drill installations
• Recessed friction plate for ease of install

Silver Polystainless Non-Conductive Core Hole Spigot

• Silver Core Hole Spigot
• No electrician required for earthing – save time and money!
• NATA tested in accordance with Australian Standards (AS1926.1 Safety Barriers for Pools)
• Made from ultra-robust, UV stabilised reinforced composite material giving a stainless steel feel and appearance (patented product)
• Composite construction – surface will not rust or corrode
• Suits 12mm thick glass panels
• Designed for core drill installations
• Recessed friction plate for ease of install

Black Silver Polystainless Non-Conductive Core Hole Spigot with Dress Ring

• Black Spigot and Dress Ring
• No electrician required for earthing – save time and money!
• NATA tested in accordance with Australian Standards (AS1926.1 Safety Barriers for Pools)
• Made from ultra-robust, UV stabilised reinforced composite material giving a stainless steel feel and appearance (patented product)
• Composite construction – surface will not rust or corrode
• Suits 12mm thick glass panels
• Designed for core drill installations
• Recessed friction plate for ease of install

Black Silver Polystainless Non-Conductive Core Hole Spigot

• Black Core Hole Spigot
• No electrician required for earthing – save time and money!
• NATA tested in accordance with Australian Standards (AS1926.1 Safety Barriers for Pools)
• Made from ultra-robust, UV stabilised reinforced composite material giving a stainless steel feel and appearance (patented product)
• Composite construction – surface will not rust or corrode
• Suits 12mm thick glass panels
• Designed for core drill installations
• Recessed friction plate for ease of install

Polystainless Non-Conductive Base Plate Spigot

• No electrician required for earthing – save time and money!
• NATA tested in accordance with Australian Standards (AS1926.1 Safety Barriers for Pools)
• Made from ultra-robust, UV stabilised reinforced composite material giving a stainless steel feel and appearance (patented product)
• Composite construction – surface will not rust or corrode
• Suits 12mm thick glass panels
• Designed for core drill installations
• Recessed friction plate for ease of install

Silver Polystainless Non-Conductive Base Plate Spigot with Cover Plate

• Silver Base Plate Spigot with Cover Plate
• No electrician required for earthing – save time and money!
• NATA tested in accordance with Australian Standards (AS1926.1 Safety Barriers for Pools)
• Made from ultra-robust, UV stabilised reinforced composite material giving a stainless steel feel and appearance (patented product)
• Composite construction – surface will not rust or corrode
• Suits 12mm thick glass panels
• Designed for base plated installations
• Recessed friction plate for ease of install

Silver Polystainless Non-Conductive Base Plate Spigot

• Silver Base Plate Spigot
• No electrician required for earthing – save time and money!
• NATA tested in accordance with Australian Standards (AS1926.1 Safety Barriers for Pools)
• Made from ultra-robust, UV stabilised reinforced composite material giving a stainless steel feel and appearance (patented product)
• Composite construction – surface will not rust or corrode
• Suits 12mm thick glass panels
• Designed for base plated installations
• Recessed friction plate for ease of install

Black Polystainless Non-Conductive Base Plate Spigot with Cover Plate

• Black Base Plate Spigot with Cover Plate
• No electrician required for earthing – save time and money!
• NATA tested in accordance with Australian Standards (AS1926.1 Safety Barriers for Pools)
• Made from ultra-robust, UV stabilised reinforced composite material giving a stainless steel feel and appearance (patented product)
• Composite construction – surface will not rust or corrode
• Suits 12mm thick glass panels
• Designed for base plated installations
• Recessed friction plate for ease of install

Black Polystainless Non-Conductive Base Plate Spigot

• Black Base Plate Spigot
• No electrician required for earthing – save time and money!
• NATA tested in accordance with Australian Standards (AS1926.1 Safety Barriers for Pools)
• Made from ultra-robust, UV stabilised reinforced composite material giving a stainless steel feel and appearance (patented product)
• Composite construction – surface will not rust or corrode
• Suits 12mm thick glass panels
• Designed for base plated installations
• Recessed friction plate for ease of install

Square Base Plate Spigot With Insulator

Stainless Steel Square Base Plate Spigot plus a thermoplastic non-conductive insulating sleve that fits over the top. 

Cover Specifications

• Made from ASA thermoplastic – excellent weather & chemical resistance and high impact strength
• Non-conductive material
• Includes 1x vertical spigot stem & 2·part domical cover
• Also includes 2x caps which fit into friction grub screw holes
• Firstly install vertical stem to spigot. Fix off base plate with countersunk fixings to substrate. Install the 2 part domical cover.
• Can be retro fitted to existing base plate Madrid spigots
• Specialty designed top section prevents chance of pulling insulating cover away from spigot and base plate

Select to colour match the spigot to the cover if you plan on removing the cover at a later date.

You will not need to earth your spigot if you use this product.

Polished Square Base Plate Spigot With Silver Gloss Insulator

Stainless Steel Square Base Plate Spigot plus a thermoplastic non-conductive insulating sleve that fits over the top. 

Cover Specifications

• Made from ASA thermoplastic – excellent weather & chemical resistance and high impact strength
• Non-conductive material
• Includes 1x vertical spigot stem & 2·part domical cover
• Also includes 2x caps which fit into friction grub screw holes
• Firstly install vertical stem to spigot. Fix off base plate with countersunk fixings to substrate. Install the 2 part domical cover.
• Can be retro fitted to existing base plate Madrid spigots
• Specialty designed top section prevents chance of pulling insulating cover away from spigot and base plate

Select to colour match the spigot to the cover if you plan on removing the cover at a later date.

You will not need to earth your spigot if you use this product.