Face Mount Glass Balustrade
Step 2. Choose how to hold your glass
Your next decision to make is how you are going to hold/support your glass panels. The options available are:
Spigots
A spigot is installed onto the face of your structure and the glass is then inserted into the spigot and held with friction. There are 2 spigots to choose from including: Square Spigots and Glass Vice Spigots.
When installing a face mount glass balustrade using spigots you will need to use 1200mm high glass panels.
See Video Below
Standoffs
Standoffs hold the glass off the face of your structure using a fixing rod. They can be installed onto timber or concrete. Standoffs are available in different diameters and heights.
When installing a face mount glass balustrade using standoffs you will need to use pre-drilled 1280mm high glass panels.
See Video Below
Channel
A Channel can be screwed along the face of the deck and the glass is then glazed into the channel.