A glass brace panel is used to tie the hinge panel and return panel together. It sits above the door across the top front of the shower screen. A Wall Bracket can be used to connect the glass brace to the wall and Glass Brace Brackets join the brace panel to the hinge and return panels.
DIY glass can also supply custom sized and shaped panels. Please email
Glass Brace panel used to Connect the hinge panel to a return panel about the door. •Width: 846mm •Depth: 150mm •Thickness: 8mm •Weight: 2.5kg •Use With Hinge Panel: 229mm Requires 2 x Glass Brace Brackets and 1 x Wall Bracket for Installation.
Glass Brace panel used to Connect the hinge panel to a return panel about the door. •Width: 857mm •Depth: 150mm •Thickness: 8mm •Weight: 2.6kg •Use With Hinge Panel: 240mm Requires 2 x Glass Brace Brackets and 1 x Wall Bracket for Installation.
Glass Brace panel used to Connect the hinge panel to a return panel about the door. •Width: 896mm •Depth: 150mm •Thickness: 8mm •Weight: 2.7kg •Use With Hinge Panel: 279mm Requires 2 x Glass Brace Brackets and 1 x Wall Bracket for Installation.
Glass Brace panel used to Connect the hinge panel to a return panel about the door. •Width: 946mm •Depth: 150mm •Thickness: 8mm •Weight: 2.8kg •Use With Hinge Panel: 329mm Requires 2 x Glass Brace Brackets and 1 x Wall Bracket for Installation.
Glass Brace panel used to Connect the hinge panel to a return panel about the door. •Width: 996mm •Depth: 150mm •Thickness: 8mm •Weight: 3.0kg •Use With Hinge Panel: 379mm Requires 2 x Glass Brace Brackets and 1 x Wall Bracket for Installation.
Glass Brace panel used to Connect the hinge panel to a return panel about the door. •Width: 1046mm •Depth: 150mm •Thickness: 8mm •Weight: 3.1kg •Use With Hinge Panel: 429mm Requires 2 x Glass Brace Brackets and 1 x Wall Bracket for Installation.
Glass Brace panel used to Connect the hinge panel to a return panel about the door. •Width: 1096mm •Depth: 150mm •Thickness: 8mm •Weight: 3.3kg •Use With Hinge Panel: 479mm Requires 2 x Glass Brace Brackets and 1 x Wall Bracket for Installation.
Glass Brace panel used to Connect the hinge panel to a return panel about the door. •Width: 1146mm •Depth: 150mm •Thickness: 8mm •Weight: 3.4kg •Use With Hinge Panel: 529mm Requires 2 x Glass Brace Brackets and 1 x Wall Bracket for Installation.
Glass Brace panel used to Connect the hinge panel to a return panel about the door. •Width: 1157mm •Depth: 150mm •Thickness: 8mm •Weight: 3.6kg •Use With Hinge Panel: 540mm Requires 2 x Glass Brace Brackets and 1 x Wall Bracket for Installation.
Glass Brace panel used to Connect the hinge panel to a return panel about the door.
Used to fix Hinge and Return/Fixed panels to the wall.
3 Per Panel recommended
Silicon must be used along glass edge when friction brackets used
Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.
Used to fix Hinge and Return/Fixed panels to the wall in a shower screen.
3 Per Panel recommended
These are easier to install then the hidden screw wall bracket. The screw can be marked and installed with the glass standing in place.
Silicon must be used along glass edge when friction brackets used.
Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.
Used to stiffen and brace a return or hinge panel by fixing a brace panel along the top and tying them together.
Can also be used to tie a Fixed panel back to the wall.
Tip: Place bracket ensuring glass door does not hit when swinging inwards.
Used to stiffen and brace a return or hinge panel by fixing a brace panel along the top and tying them together.
Can also be used to tie a Fixed panel back to the wall.
Tip: Place bracket ensuring glass door does not hit when swinging inwards.
Used to fix Hinge and Return/Fixed panels to the wall.
3 Per Panel recommended
Silicon must be used along glass edge when friction brackets used
Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.
Used to fix Hinge and Return/Fixed panels to the wall.
3 Per Panel recommended
These are easier to install then the hidden screw wall bracket. The screw can be marked and installed with the glass standing in place.
Silicon must be used along glass edge when friction brackets used.
Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.
Used to stiffen and brace a return or hinge panel by fixing a brace panel along the top and tying them together.
Can also be used to tie a Fixed panel back to the wall.
Tip: Place bracket ensuring glass door does not hit when swinging inwards.
Used to stiffen and brace a return or hinge panel by fixing a brace panel along the top and tying them together.
Can also be used to tie a Fixed panel back to the wall.
Tip: Place bracket ensuring glass door does not hit when swinging inwards.
Glass Supplied to almost any size and shape. Glass is cut from a 5500x2800mm panel. Glass supplied in thicknesses from 4mm to 19mm thick. Please email your requirements to sales@diyglass.com.au including and drawing of your required panel and your postcode for delivery.
Used to stiffen and brace a return or hinge panel by fixing a brace panel along the top and tying them together.
Can also be used to tie a Fixed panel back to the wall.
Tip: Place bracket ensuring glass door does not hit when swinging inwards.
Used to stiffen and brace a return or hinge panel by fixing a brace panel along the top and tying them together.
Can also be used to tie a Fixed panel back to the wall.
Tip: Place bracket ensuring glass door does not hit when swinging inwards.
Used to stiffen and brace a return or hinge panel by fixing a brace panel along the top and tying them together.
Can also be used to tie a Fixed panel back to the wall.
Tip: Place bracket ensuring glass door does not hit when swinging inwards.
Used to stiffen and brace a return or hinge panel by fixing a brace panel along the top and tying them together.
Can also be used to tie a Fixed panel back to the wall.
Tip: Place bracket ensuring glass door does not hit when swinging inwards.
Used to stiffen and brace a return or hinge panel by fixing a brace panel along the top and tying them together.
Can also be used to tie a Fixed panel back to the wall.
Tip: Place bracket ensuring glass door does not hit when swinging inwards.
Used to stiffen and brace a return or hinge panel by fixing a brace panel along the top and tying them together.
Can also be used to tie a Fixed panel back to the wall.
Tip: Place bracket ensuring glass door does not hit when swinging inwards.
Used to stiffen and brace a return or hinge panel by fixing a brace panel along the top and tying them together.
Can also be used to tie a Fixed panel back to the wall.
Tip: Place bracket ensuring glass door does not hit when swinging inwards.
Used to stiffen and brace a return or hinge panel by fixing a brace panel along the top and tying them together.
Can also be used to tie a Fixed panel back to the wall.
Tip: Place bracket ensuring glass door does not hit when swinging inwards.
Used to fix Hinge and Return/Fixed panels to the wall.
3 Per Panel recommended
Silicon must be used along glass edge when friction brackets used
Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.
