Used to fix Hinge and Return/Fixed panels to the wall.

3 Per Panel recommended

• Wall Bracket
• 3mm Gap between glass and wall
• Brushed Brass / Gold Finish
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• 2 x Compression/Friction screws
• No holes in glass required
• Made from solid brass
• 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

Used to fix Hinge and Return/Fixed panels to the wall in a shower screen.

3 Per Panel recommended

These are easier to install then the hidden screw wall bracket. The screw can be marked and installed with the glass standing in place.

• Offset Wall Bracket for Shower Screens
• Brushed Gold Finish
• 3mm Gap between glass and wall
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• 2 x Compression/Friction screws
• No holes in glass required
• Made from solid brass
• 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used.

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

2 required per door

• Glass to Glass Hinge
• Brushed Brass / Gold Finish
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards (90 Degrees inwards and Outwards)
• Will hold door at 90 degrees inwards, 90 Degree Outwards and 180 Degrees closed.
• Made from solid brass
• Allen Key & Gaskets included

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

2 required per door

• Wall to Glass Hinge
• Brushed Brass / Gold Finish
• 4 x Fixing Holes
• Allow 9mm gap between Wall and Glass
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards
• Made from solid brass
• Fixing Screws included
• Allen Key & Gaskets included

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

2 required per door

• Brushed Brass / Gold Finish
• Offset Wall to Glass Hinge
• 3 x Fixing Holes
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards
• Made from solid brass
• Fixing Screws included
• Allen Key & Gaskets included

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

• 19mm Slimline Anodised Aluminium Channel
• Adds 8mm to the overall glass width
• Brushed Brass / Gold Finish
• Dry Glaze System - No need for silicon in glass
• Suits 10mm Glass
• Consider using where the wall is out of square (up to 6mm) or where a slimline channel looks is desired
• Unique Aluminium extrusion has internal ribs which hold secure 2part Clear Glazing PVC
• Fast Installation
• U-Channel & 2 Part Glazing PVC Included

• Round Knob for Glass Shower Screen Door
• Brushed Brass / Gold Finish
• Double pull knob
• Suits 8mm, 10mm and 12mm thick glass
• Requires a 12mm hole in the door
• Made from Solid Brass
• Nylon spacers and gaskets included to prevent glass/metal contact

Used to stiffen and brace a Return/Fixed panel by tying it to the wall.

• Back Wall to Glass support arm
• Double adjustability for easy installation. Adjustable at wall & at glass
• Hidden fixing wall installation for a neat finish.
• Suitable for 8 and 10mm thick glass
• Compression/friction screws secure to the glass. No holes in glass required

Used to stiffen and brace a Return/Fixed panel by connecting it to the adjacent wall.

• Adjacent Wall to Glass support arm
• Adjustable length by cutting the tube to the required length.
• Maximum width of 1200mm
• Hidden fixing wall installation for a neat finish.
• Suitable for 8 and 10mm thick glass
• Compression/friction screws secure to the glass. No holes in glass required

Used to stiffen and brace a return or hinge panel by fixing a brace panel along the top and tying them together.

Can also be used to tie a Fixed panel back to the wall.

• Small Glass Brace Bracket
• Square Finish Edges
• Brace 8mm thick glass hood to 10mm thick return & hinge panels
• 4 x compression/friction screws
• Sturdy design
• No holes required in glass

Tip: Place bracket ensuring glass door does not hit when swinging inwards.