Used to fix Hinge and Return/Fixed panels to the wall.
3 Per Panel recommended
Wall Bracket
3mm Gap between glass and wall
Matt Black Finish
Square Finish Edges
Suitable for 8mm & 10mm Glass
2 x Compression/Friction screws
No holes in glass required
Made from solid brass
1 x Fixing screw and Clear Gaskets Provided
Silicon must be used along glass edge when friction brackets used
Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.
Used to fix Hinge and Return/Fixed panels to the wall.
3 Per Panel recommended
These are easier to install then the hidden screw wall bracket. The screw can be marked and installed with the glass standing in place.
Wall Bracket
Matt Black Finish
3mm Gap between glass and wall
Square Finish Edges
Suitable for 8mm & 10mm Glass
2 x Compression/Friction screws
No holes in glass required
Made from solid brass
1 x Fixing screw and Clear Gaskets Provided
Silicon must be used along glass edge when friction brackets used.
Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.