Glass Fence Gate Hardware

Glass Gate Latches and Hinges

You will need to use 1 latch and 1 hinge set for each gate you are installing in your pool fence. It is important that you select the correct hinge for your pool fence layout. You will need to know from where the gate will be hinged (swinging off) and latched (closed against).

Click Here to View our Glass Gate Layout Guide

Latch options include:

Glass Gate to Glass Panel Straight Economy
Glass Gate to Glass Panel 90 Degree Internal Corner
Glass Gate to Glass Panel 90 Degree External Corner
Glass Gate to Wall/Square Post Economy
Glass Gate to Round Post

Note: For most of our latches only the glass gate will require pre-drilled holes. When the non-gate side is also attaching to glass it is friction fixed with 2 grub screws.

Hinge Options include:

Glass Gate to Glass Panel
Glass Gate to Wall/Square Post
Glass Gate to Round Post

Note: When using glass to glass both the hinge panel and gate panel will require holes.

You will also need to make sure you order the correct gate panel and hinge panel (if necessary).

Sort by

Results 1 - 15 of 15

Glass to Glass in Straight Line Deluxe Pool Fence Gate Latch

Glass to Glass Latch - Straight Line
Use for Glass Pool Fence Gate or Glass Balustrade Gate
Both Backing plates and latch are 316 Stainless Steel
Requires Gate to be drilled (2 x 10mm Holes, 20mm in from edge and 42mm apart)
Latch Panel must be 12mm - No holes required
Suits 8, 10 and 12mm gates
For best results leave a 9mm gap between the gate and latch panel

$ 153.85

Glass to Glass in Straight Line Economy Pool Fence Gate Latch

Glass to Glass Latch - Straight Line
Use for Glass Pool Fence Gate or Glass Balustrade Gate
Backing Plates are 316 Stainless Steel
Economy Latch is Black Polymer
Requires Gate to be drilled (2 x 10mm Holes, 20mm in from edge and 42mm apart)
Latch Panel must be 12mm - No holes required
Suits 8, 10 and 12mm gates
For best results leave a 9mm gap between the gate and latch panel

$ 107.00

Black Glass to Glass in Straight Line Economy Pool Fence Gate Latch

Black Glass to Glass Latch - Straight Line
Use for Glass Pool Fence Gate or Glass Balustrade Gate
Backing Plates are powder coated 316 Stainless Steel
Economy Latch is Black Polymer
Requires Gate to be drilled (2 x 10mm Holes, 20mm in from edge and 42mm apart)
Latch Panel must be 12mm - No holes required
Suits 8, 10 and 12mm gates
For best results leave a 9mm gap between the gate and latch panel

$ 110.00

Glass to Wall/Square Post Economy Pool Fence Gate Latch

Glass to Wall/Square Post
Use for Glass Pool Fence Gate or Glass Balustrade Gate
Backing Plates are 316 Stainless Steel
Latch is Black Polymer
Requires Gate to be drilled (2 x 12mm Holes, 20mm in from edge and 42mm apart)
Suits 8, 10 and 12mm gates
For best results leave a 9mm gap between the gate and Post/Wall

Glass to Square Post Gate Latch

$ 90.85

Black Glass to Wall/Square Post Economy Pool Fence Gate Latch

Black Glass to Wall/Square Post
Use for Glass Pool Fence Gate or Glass Balustrade Gate
Backing Plates are powder coated 316 Stainless Steel
Latch is Black Polymer
Requires Gate to be drilled (2 x 12mm Holes, 20mm in from edge and 42mm apart)
Suits 8, 10 and 12mm gates
For best results leave a 9mm gap between the gate and Post/Wall

Glass to Square Post Gate Latch

$ 95.00

Glass to Wall/Square Post Deluxe Pool Fence Gate Latch

Glass to Wall/Square Post
Use for Glass Pool Fence Gate or Glass Balustrade Gate
Backing Plates are 316 Stainless Steel
Deluxe Latch in 316 Stainless Steel
Requires Gate to be drilled (2 x 12mm Holes, 20mm in from edge and 42mm apart)
Suits 8, 10 and 12mm gates
For best results leave a 9mm gap between the gate and Post/Wall

$ 153.85

Glass Gate Latch for External Glass to Glass

Glass to Glass 90 Degree External Angle Pool Fence Gate Latch

Glass to Glass at a 90 Degree External Angle Latch
Use for Glass Pool Fence Gate or Glass Balustrade Gate
Backing Plates are 316 Stainless Steel
Latch is Black Polymer
Requires Gate to be drilled (2 x 10mm Holes, 20mm in from edge and 42mm apart)
Latch Panel must be 12mm - No holes required
Suits 8, 10 and 12mm gates
For best results leave a 9mm gap between the gate and latch panel

$ 119.95

Glass Gate Latch for Internal Glass to Glass

Glass to Glass 90 Degree Internal Angle Pool Fence Gate Latch

Glass to Glass at a 90 Degree Internal Angle Latch
Use for Glass Pool Fence Gate or Glass Balustrade Gate
Backing Plates are 316 Stainless Steel
Latch is Black Polymer
Requires Gate to be drilled (2 x 10mm Holes, 20mm in from edge and 42mm apart)
Latch Panel must be 12mm - No holes required
Suits 8, 10 and 12mm gates
For best results leave a 9mm gap between the gate and latch panel

$ 119.95

Black Glass Gate Latch for External Glass to Glass

Black Glass to Glass 90 Degree External Angle Pool Fence Gate Latch

Black Glass to Glass at a 90 Degree External Angle Latch
Use for Glass Pool Fence Gate or Glass Balustrade Gate
Backing Plates are powder coated 316 Stainless Steel
Latch is Black Polymer
Requires Gate to be drilled (2 x 10mm Holes, 20mm in from edge and 42mm apart)
Latch Panel must be 12mm - No holes required
Suits 8, 10 and 12mm gates
For best results leave a 9mm gap between the gate and latch panel

Glass to Glass External Gate Latch

$ 132.00

Glass to Round Post Deluxe Gate Pool Fence Latch

Glass to Round Post Deluxe Latch
Use for Glass Pool Fence Gate or Glass Balustrade Gate
Backing Plates are 316 Stainless Steel
Latch is 316 Stainless Steel
Requires Gate to be drilled (2 x 12mm Holes, 20mm in from edge and 42mm apart)
Suits 8, 10 and 12mm gates
For best results leave a 9mm gap between the gate and Post/Wall

$ 137.05

Glass to Glass Pool Fence Gate Hinge Set

Glass to Glass Gate Hinge
Use for Glass Pool Fence Gate or Glass Balustrade Gate
Suits 8 & 10mm Glass Gates
Suits 12mm Hinge Panel
316 Grade Stainless
Gate needs to be drilled with 4 x 10mm Holes (24mm in from the side and 47 apart)
Hinge panel needs to be drilled 4 x 14mm Holes (40mm in from the side and 60mm apart)
For best results allow for a 10mm gap between the hinge panel and gate

$ 152.45

Glass to Wall/Square Post Pool Fence Hinge Set

Glass to Wall/Square Post
Use for Glass Pool Fence or Glass Balustrade Gate
Suits 8 & 10mm Glass Gates
316 Grade Stainless
Gate needs to be drilled with 4 x 10mm Holes (24mm in from the side and 47 apart)
You will need to allow for a gap of 22mm between the gate and post

Glass Gate to Wall Hinges

$ 77.00

Glass to Round Post Pool Fence Hinge Set

Glass to Round Post Hinge Set
Use for Glass Pool Fence or Glass Balustrade Gate
Suits 8 & 10mm Glass Gates
316 Grade Stainless
Gate needs to be drilled with 4 x 10mm Holes (24mm in from the side and 47 apart)
You will need to allow for a gap of 20mm between the gate and post

$ 86.00

Matt Black Glass to Glass Pool Fence Gate Hinge Set

Matt Black Glass to Glass Gate Hinge
Use for Glass Pool Fence Gate or Glass Balustrade Gate
Suits 8 & 10mm Glass Gates
Suits 12mm Hinge Panel
316 Grade Stainless powder coated backing plate
Sold as a pair
Gate needs to be drilled with 4 x 10mm Holes (24mm in from the side and 47 apart)
Hinge panel needs to be drilled 4 x 14mm Holes (40mm in from the side and 60mm apart)
For best results allow for a 16mm gap between the hinge panel and gate

$ 225.00

Black Glass to Wall/Square Post Pool Fence Hinge Set

Glass to Wall/Square Post
Use for Glass Pool Fence or Glass Balustrade Gate
Suits 8 & 10mm Glass Gates
316 Grade Stainless
Gate needs to be drilled with 4 x 10mm Holes (24mm in from the side and 47 apart)
You will need to allow for a gap of 22mm between the gate and post

Glass Gate to Wall Hinges

$ 91.00