35mm Wide 2100mm long Matt Black Shower Screen Aluminium U Channel
- 35mm Slimline Anodised Aluminium Channel
- Adds 8mm to the overall glass width
- Matt Black Finish
- Dry Glaze System - No need for silicon in glass
- Suits 10mm Glass
- Consider using where the wall is out of square (up to 6mm) or where a slimline channel looks is desired
- Unique Aluminium extrusion has internal ribs which hold secure 2part Clear Glazing PVC
- Fast Installation
- U-Channel & 2 Part Glazing PVC Included
$ 65.00
Related Products
19mm Wide 2100mm Long Chrome Shower Screen Aluminium U Channel
- 19mm Slimline Anodised Aluminium Channel
- Adds 8mm to the overall glass width
- High Polished Chrome Look Finish
- Dry Glaze System - No need for silicon in glass
- Suits 10mm Glass
- Consider using where the wall is out of square (up to 6mm) or where a slimline channel looks is desired
- Unique Aluminium extrusion has internal ribs which hold secure 2part Clear Glazing PVC
- Fast Installation
- U-Channel & 2 Part Glazing PVC Included
$ 48.00
Wall Bracket - Matt Black - For Glass Shower Screen
Used to fix Hinge and Return/Fixed panels to the wall.
3 Per Panel recommended
- Wall Bracket
- 3mm Gap between glass and wall
- Matt Black Finish
- Square Finish Edges
- Suitable for 8mm & 10mm Glass
- 2 x Compression/Friction screws
- No holes in glass required
- Made from solid brass
- 1 x Fixing screw and Clear Gaskets Provided
Silicon must be used along glass edge when friction brackets used
Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.
$ 10.65
Offset Wall Bracket - Matt Black - For Glass Shower Screen
Used to fix Hinge and Return/Fixed panels to the wall.
3 Per Panel recommended
These are easier to install then the hidden screw wall bracket. The screw can be marked and installed with the glass standing in place.
- Wall Bracket
- Matt Black Finish
- 3mm Gap between glass and wall
- Square Finish Edges
- Suitable for 8mm & 10mm Glass
- 2 x Compression/Friction screws
- No holes in glass required
- Made from solid brass
- 1 x Fixing screw and Clear Gaskets Provided
Silicon must be used along glass edge when friction brackets used.
Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.
$ 16.20